better-semantic-release 1.2.2b3

Drop-in python-semantic-release fork with built-in release-safety guards (orphan-tag + registry-collision).

better-semantic-release

A drop-in fork of python-semantic-release with built-in release-safety guards.

---

better-semantic-release is a drop-in fork of python-semantic-release (MIT licensed). It keeps the same [tool.semantic_release] configuration schema, the same semantic-release CLI, and the same GitHub Action interface – switching over only requires pointing the uses: line at the fork:

uses: n24q02m/better-semantic-release@v<major>

On top of that, the fork adds release-safety guards that run automatically before any commit, tag, or push is made. Guards can be opted out of per-repository under the [tool.semantic_release.bsr] table in pyproject.toml.

How it differs from upstream

Behavior	Upstream (python-semantic-release)	better-semantic-release
Orphaned release-tag detection (a rebase or force-push silently freezes releases on a tag nobody notices)	None	Built-in, fails loud
Registry-collision detection (re-publishing a version that already exists on the target registry)	None	Built-in, fails closed
Monorepo commit path filtering (commits outside a component’s configured path(s) count toward its version bump / changelog)	None	Opt-in, off by default (drop-in)
Why a run did (or did not) release – the real reason, not the misattributed “already released” message	Only at INFO log level, never surfaced	Opt-in, off by default (explain)
Recurring cryptic failures (bad config key, unknown commit parser, missing git remote, prerelease-bump mismatch)	Raw str(exc), or an uncaught traceback	Opt-in “what / why / fix” messages (actionable_errors)
Per-component “what would this release do” plan for a monorepo	None	Opt-in report-only table (summary)
Stable release notes after a prerelease line (prerelease tags “consume” the commits, leaving the stable section empty)	Won’t fix upstream	Opt-in aggregation (stable_notes_aggregate)
Config / CLI / GitHub Action interface	–	Identical (drop-in)

Note

The guards are on by default. The registry-collision guard auto-targets PyPI for a project that declares [project].name and fails closed – if the registry is unreachable (network / rate-limit / 5xx) it aborts the release rather than risk a double publish, which couples release availability to the registry’s uptime. Tune or disable per repository under [tool.semantic_release.bsr] (guard_orphan_tag, guard_registry_collision, registry = "pypi" | "npm" | "none").

Note

Guards evaluate even under --noop / dry-run – this is deliberate, so a dry-run surfaces would-be blocks instead of silently skipping the safety checks a real release would hit. In dry-run, the registry-collision guard still performs a live, read-only HTTP GET against the target registry (PyPI/npm) to check whether the computed version already exists; no commit, tag, or push is made either way.

Configuration reference

Every fork addition lives under [tool.semantic_release.bsr] in the same config file upstream already reads (pyproject.toml, setup.cfg, releaserc.toml, …). The two guards are on by default; everything else is off by default, so an untouched config behaves exactly like upstream.

Key	Default	What it does
guard_orphan_tag	true	Fail loud when the version recomputes to an already-released tag that is no longer reachable from HEAD (a rebase / force-push dropped the release commit).
guard_registry_collision	true	Fail closed when the computed version already exists on the target registry.
registry	auto	"pypi", "npm" or "none". Auto-targets PyPI when [project].name is declared.
path_filter / paths	false / []	Count only commits touching the configured path prefixes toward this component’s bump and changelog.
explain	false	Report the real reason a run did or did not release.
actionable_errors	false	Replace recurring cryptic failures with “what / why / fix” messages.
summary / components	false / []	Print a report-only, per-component release plan for a monorepo.
stable_notes_aggregate / stable_notes_scope	false / "line"	Fold the notes of intervening prereleases into the stable release they finalize.

Every diagnostic below writes to stderr, so semantic-release version keeps printing only the version number on stdout and stays safe to capture in a shell substitution.

Release diagnostics (explain)

When next_version() recomputes a version that already exists, upstream always prints the same line – No release will be made, X has already been released! – no matter what actually happened. The usual real cause is that no commit since the last release qualified for a bump, a fact upstream only logs at INFO and never surfaces.

[tool.semantic_release.bsr]
explain = true

With explain on, that line is replaced by the classified cause:

• NO_QUALIFYING_COMMITS – commits were scanned, none were releasable (no feat / fix / breaking-change commits). This is the case upstream misattributes.

• ALREADY_RELEASED_NOOP – the current tip is already tagged; a genuine re-dispatch with nothing new to release.

• ORPHAN – the version recomputes to an already-released but unreachable tag, which is the silent-release-freeze the orphan-tag guard exists for.

On a run that does release, it also prints a “why this bump” line – the bump level, the per-commit-type breakdown behind it, the base version, and how many commits were scanned:

better-semantic-release explain: minor bump from 2 feat, 3 fix commit(s) since 1.4.0 (5 commit(s) scanned).

Actionable error messages (actionable_errors)

Upstream surfaces its most-cited failures as a bare str(exc) with no framing, and leaves two of them uncaught entirely (raw traceback).

[tool.semantic_release.bsr]
actionable_errors = true

With the flag on, these categories are rewritten as “what happened / why / how to fix”:

• PRERELEASE BUMP MISMATCH – a prerelease-level bump was requested but the base version is not already a prerelease.

• INVALID CONFIGURATION – each failing key is listed as [tool.semantic_release.<key>]: <reason> instead of a raw pydantic dump.

• PARSER LOAD FAILED – lists the valid parser names (angular, conventional, conventional-monorepo, emoji, scipy) and the module:ClassName form.

• GIT REMOTE NOT FOUND – shows both fixes (add the remote, or point [tool.semantic_release.remote] at an existing one).

• TAG_FORMAT MISMATCH – a note emitted when the repository has git tags but none match the configured tag_format, which otherwise makes upstream silently treat the repository as having no prior releases and start over from the initial version.

Note

MissingGitRemote and ParserLoadError are not caught by upstream at all. With actionable_errors off they are deliberately re-raised unchanged, so output stays byte-for-byte identical to upstream; only with the flag on are they caught and enriched. This is pure message enrichment – no new exception types, and no change to exit codes.

Monorepo path filtering

Upstream’s directory: input only selects where config (pyproject.toml, tag_format, …) is read from – it does not filter which commits are analyzed, so in a monorepo a commit touching an unrelated component still bumps this component’s version and shows up in its changelog. This is opt-in and off by default (drop-in): enable it under [tool.semantic_release.bsr].

[tool.semantic_release.bsr]
path_filter = true
paths = ["apps/api", "libs/shared"]

• path_filter (default false) – master switch. When false the fork behaves identically to upstream: every commit since the last release counts, regardless of which paths it touched.

• paths (default [], repository-root-relative) – one or more path prefixes; a commit only counts toward this component if it changed a file under one of them. Multiple entries are OR’d together, which supports a component that also depends on shared code (e.g. ["apps/api", "libs/shared"]).

• When path_filter is true and paths is left empty, it defaults to the run directory (the GitHub Action’s directory: input) made relative to the repository root.

Note

Path filtering applies to both the version-bump computation and the generated changelog – a commit excluded from one is excluded from the other.

Monorepo release-plan summary (summary)

Neither upstream’s conventional-monorepo parser nor the path filter above tells you what a release run would do across a monorepo’s components before it does it.

[tool.semantic_release.bsr]
summary = true
components = [
    { name = "api", paths = ["apps/api", "libs/shared"] },
    { name = "web", paths = ["apps/web"] },
]

Each row is computed with the same next_version() upstream uses for the real release, scoped to that component’s paths:

better-semantic-release summary: monorepo release plan
component  would-release  level       commits  sample paths                            version
---------  -------------  ----------  -------  --------------------------------------  -------
api        yes            MINOR       4        apps/api/main.go, apps/api/handlers.go  1.4.0
web        no             NO_RELEASE  0        -                                       1.2.3

• The report is read-only – nothing is committed, tagged, pushed or persisted, and it renders before any persistence step, so it appears whether or not the run itself ends up releasing.

• components is optional. Left empty, you get a single row built from bsr.paths and named after [project].name – so a non-monorepo project still gets a plan instead of an empty report.

• A component with no paths means “the whole repository” (the filter is a passthrough), not “nothing”.

Stable release notes aggregation (stable_notes_aggregate)

Upstream buckets every commit under the nearest tag walking back from HEAD. Once a line has rc/beta tags, those prereleases have already “consumed” the commits, so finalizing the stable version with no brand-new commits of its own produces a release section that is empty – or fragmented across the prerelease tags instead of one grouped vX.Y.Z section. This is the most-cited changelog complaint upstream (issues #555, #817, #1377, #1440) and is won’t-fix there.

[tool.semantic_release.bsr]
stable_notes_aggregate = true
stable_notes_scope = "line"  # or "since_stable"

With this on, the notes of every intervening prerelease are merged into the stable release that finalizes them, de-duplicated by commit sha, covering both the written changelog and the VCS release notes. It only ever runs for a genuine stable finalize; a prerelease run is untouched.

• scope = "line" (default) – fold in prereleases sharing the stable version’s major.minor.patch.

• scope = "since_stable" – walk back from the new version and fold in every intervening prerelease regardless of line, stopping at (and excluding) the previous stable tag. This differs from "line" when a prerelease track was abandoned mid-line: if a forced bump moved 0.2.0-beta.1 to 1.0.0-beta.1, "line" picks up only 1.0.0-beta.1 while "since_stable" also folds in the abandoned 0.2.0-beta.1.

Note

This is off by default because – unlike the diagnostics above – it changes the changelog content, which is a committed artifact.

---

Python Semantic Release

Automating Releases via SemVer and Commit Message Conventions

---

The official documentation for Python Semantic Release can be found at python-semantic-release.readthedocs.io.

GitHub Action

When using the Python Semantic Release GitHub Action, it executes the command semantic-release version using python-semantic-release.

The usage information and examples for this GitHub Action is available under the GitHub Actions section of python-semantic-release.readthedocs.io.