blebox-uniapi 2.5.6

Features

• supports 11 BleBox smart home devices

• contains functional/integration tests

• every device supports at least minimum functionality for most common automation needs

• insight of integration level are accesible from file box_types.py

  (devices with apiLevel lower than defined in BOX_TYPE_CONF will not be supported but higher will)

Contributions are welcome!

Credits

2.5.1 (2026-04-21)

• fix: multisensor current and energy sensor scales

2.5.0 (2024-08-20)

• feature: expose sensor_id in sensors and alias in all features by @swistakm in https://github.com/blebox/blebox_uniapi/pull/176

2.4.2 (2024-06-04)

• fix: add missing support for active power sensors on switchbox/switchboxd devices by @swistakm in https://github.com/blebox/blebox_uniapi/pull/175

2.4.1 (2024-06-04)

• fix: rectify ambiguity around powerConsumption and wind sensor types

2.4.0 (2024-06-03)

• Fix: Refactor sensor_factory by @Pastucha in https://github.com/blebox/blebox_uniapi/pull/163

• Order in BOX_TYPES by @Pastucha in https://github.com/blebox/blebox_uniapi/pull/164

• Feature: smart meter by @swistakm in https://github.com/blebox/blebox_uniapi/pull/168

• Smartmeter by @pvsti in https://github.com/blebox/blebox_uniapi/pull/170

• fix: resolve regressions in cover and climate due to jmespath introduction by @swistakm in https://github.com/blebox/blebox_uniapi/pull/173

2.3.0 (2024-03-13)

• feat: add new methods to cover feature enabling handling of tilt open/close actions by @swistakm in https://github.com/blebox/blebox_uniapi/pull/154

• add support for flood sensing for multisensors as binary moisture sensor by @swistakm in https://github.com/blebox/blebox_uniapi/pull/153

• feat/fix: Add Ruff and Pre-commit Configuration, Resolve Undefined Name by @Pastucha in https://github.com/blebox/blebox_uniapi/pull/158

• gatebox and shutterbox improvements: by @swistakm in https://github.com/blebox/blebox_uniapi/pull/156

• BleBox Multisensor Illuminance Integration by @Pastucha in https://github.com/blebox/blebox_uniapi/pull/161

2.2.2 (2024-02-07)

• fixed wind reading units to get proper raw m/s value (division by 10, see PR #150)

2.2.1 (2024-01-26)

• fixed support for power measurement capabilities of switchBox and switchBoxD devices

2.2.0 (2023-08-29)

• added last_reset to energy sensor class

• added BasicAuth support to http client

2.1.4 (2023-01-03)

• added tilt position support for cover.Shutter

• added Wind for wind sensor of multisensors

• added Energy sensor class for power consumption tracking

• implementing default_api_level for

  • dimmerBox

  • wLightBox

  • wLightBoxS

2.1.3 (2022-10-27)

• thermoBox boost mode doesn’t corrupt state

2.1.2 (2022-10-17)

• fixed CCT, CCTx2 modes for wLightBox v1 & v2

2.1.1 (2022-10-11)

• added support for thermoBox devices:

  • added thermoBox config to BOX_TYPE_CONFIG

  • Climate uses factory method implementation

  • added test coverage

2.1.0 (2022-08-05)

• added support for multiSensor API:

  • airQuality moved to sensor module

  • new binary_sensor module, introducing Rain class

2.0.2 (2022-07-06)

• added query_string property in Button class

• fixed test assertions after changes in error raised ValueError

2.0.1 (2022-06-01)

• used ValueError type instead of BadOnValueError in methods:

  • evaluate_brightness_from_rgb

  • apply_brightness

  • normalise_elements_of_rgb

  • _set_last_on_value

  • async_on

2.0.0 (2022-06-21)

• extended support for color modes in wLightBox devices

• initial support for tvLiftBox device

• major backward-incompatible architectural changes to enable dynamic configuration of devices

• removed products.py module and replaced with factory method on Box class

• general overhaul of public interfaces

1.3.3 (2021-05-12)

• fix support for wLightBoxS with wLightBox API

• fix state detection in gateBox

1.3.2 (2020-04-2)

• use proper module-level logger by default

• fix formatting

1.3.1 (2020-04-2)

• never skip command requests

• improve error messages

1.2.0 (2020-03-30)

• expose device info

• always add ip/port in connection errors

• fixed gateController support

• support for sauna min/max temp

1.1.0 (2020-03-24)

• fix bad wLightBox API path

• wrap api calls in semaphore (to serialize reqests to each box)

• throttle updates to 2/second (to avoid unnecessary requests)

• rework error handling and hierarchy (for cleaner usage)

• use actual device name (to help recognize the device)

• handle asyncio.TimeoutError (to handle timeout-related errors nicely)

• properly re-raise exceptions (to avoid lengthy call stacktraces)

• rename wLightBoxS feature to “brightness”

1.1.0 (2020-03-24)

• fix switchBox support

• fix minimum position handling

• drop Python 3.6 support (still may work)

• misc fixes, cleanup and increased test coverage

1.0.0 (2020-03-24)

• Fixed wLightBox issues

• Fixed wLightBoxS issues

• Fixed shutterBox issues

• Handle unknown shutterBox position

• Improved error handling + lots of new diagnostics

• Increased tests and test coverage (almost 100%)

• Lots of rework

0.1.1 (2020-03-15)

• Fixed switchBox support (newer API versions)

0.1.0 (2020-03-10)

• First release on PyPI.