bluetti-bt-lib 0.0.7

Bluetti BT

bluetti-bt-lib

Inofficial Library for basic communication to bluetti powerstations. Core functions based on https://github.com/warhammerkid/bluetti_mqtt

Disclaimer

This library is provided without any warranty or support by Bluetti. I do not take responsibility for any problems it may cause in all cases. Use it at your own risk.

Installation

pip install bluetti-bt-lib

Commands for testing

Scan for supported devices

usage: bluetti-scan [-h]

Detect bluetti devices by bluetooth name

options:
  -h, --help  show this help message and exit

Detect device type by mac address

usage: bluetti-detect [-h] mac

Detect bluetti devices

positional arguments:
  mac         Mac-address of the powerstation

options:
  -h, --help  show this help message and exit

Example:

bluetti-detect 00:00:00:00:00:00

Read device data for supported devices

usage: bluetti-read [-h] [-m MAC] [-t TYPE] [-e ENCRYPTION]

Detect bluetti devices

options:
  -h, --help            show this help message and exit
  -m MAC, --mac MAC     Mac-address of the powerstation
  -t TYPE, --type TYPE  Type of the powerstation (AC70 f.ex.)
  -e ENCRYPTION, --encryption ENCRYPTION
                        Add this if encryption is needed

Example:

bluetti-read -m 00:00:00:00:00:00 -t AC70

Write to supported device

usage: bluetti-write [-h] [-m MAC] [-t TYPE] [--on ON] [--off OFF] [-v VALUE] [-e ENCRYPTION] field

Write to bluetti device

positional arguments:
  field                 Field name (ctrl_dc f.ex.)

options:
  -h, --help            show this help message and exit
  -m MAC, --mac MAC     Mac-address of the powerstation
  -t TYPE, --type TYPE  Type of the powerstation (AC70 f.ex.)
  --on ON               Value to write
  --off OFF             Value to write
  -v VALUE, --value VALUE
                        Value to write (integer, see enum for value)
  -e ENCRYPTION, --encryption ENCRYPTION
                        Add this if encryption is needed

Example:

bluetti-write -m 00:00:00:00:00:00 -t EB3A --on on ctrl_ac

Supported Powerstations and data

Validated

Device Name	total_battery_percent	dc_input_power	ac_input_power	dc_output_power	ac_output_power
AC70	✅	✅	✅	✅	✅
AC180	✅	✅	✅	✅	✅
EB3A	✅	✅	✅	✅	✅
EP600	✅	PV	Grid	❌	AC Phases
Handsfree 1	✅	✅	✅	✅	✅

Added and mostly validated by contributors (some are moved here from the HA Integration https://github.com/Patrick762/hassio-bluetti-bt):

Device Name	Contributor	total_battery_percent	dc_input_power	ac_input_power	dc_output_power	ac_output_power
AC2A	@ruanmed	✅	✅	✅	✅	✅
AC60	@mzpwr	✅	✅	✅	✅	✅
AC60P	@mzpwr	✅	✅	✅	✅	✅
AC70P	@matthewpucc	✅	❌	❌	❌	❌
AC180P	@Patrick762	✅	✅	✅	✅	✅
AC200L	bluetti-mqtt	✅	✅	✅	✅	✅
AC200M	bluetti-mqtt	✅	✅	✅	✅	✅
AC200PL	@0x4E4448	✅	✅	✅	✅	✅
AC300	bluetti-mqtt	✅	✅	✅	✅	✅
AC500	bluetti-mqtt	✅	✅	✅	✅	✅
EP500	bluetti-mqtt	✅	✅	✅	✅	✅
EP500P	bluetti-mqtt	✅	✅	✅	✅	✅
EP760	@Apfuntimes	✅	PV	Grid	❌	AC Phases
EP800	@jhagenk	✅	❌	❌	❌	❌

Controls

Currently only "switches" are supported

Validated

Device Name	ctrl_ac	ctrl_dc
EB3A	✅	✅

Battery pack data

Data for battery packs will no longer be available in this library