botwright 0.1.2

End-to-end test framework for Discord bots, built on discord.py.

Botwright

 ____        _                  _       _     _
| __ )  ___ | |___      ___ __ (_) __ _| |__ | |_
|  _ \ / _ \| __\ \ /\ / / '__|| |/ _` | '_ \| __|
| |_) | (_) | |_ \ V  V /| |   | | (_| | | | | |_
|____/ \___/ \__| \_/\_/ |_|   |_|\__, |_| |_|\__|
                                  |___/

Discord bot e2e tests through real channels, real messages, real assertions.

End-to-end testing for Discord bots, built on discord.py and pytest.

Botwright uses a real tester bot account to talk to your target bot in Discord. Tests send real Discord messages, wait for target-bot responses, and assert on real discord.Message objects.

import pytest

from botwright import TestSession


@pytest.mark.asyncio
async def test_ping(session: TestSession):
    reply = await session.send_and_wait("!ping")

    assert reply.content == "pong"
    assert reply.author.id == session.target_bot_id

Why Botwright?

Unit tests are useful, but Discord bots often fail at the boundary: intents, permissions, channel routing, embeds, command prefixes, bot-to-bot behavior, and Discord API timing.

Botwright tests that boundary directly:

• Runs inside pytest, so you keep normal assert, fixtures, parametrization, and reporting.
• Uses one tester bot per pytest session for fast startup.
• Uses one isolated temporary channel per test by default.
• Supports fixed-channel tests for bots that only monitor specific channels.
• Returns real discord.py objects instead of wrapping responses in a custom DSL.

Installation

uv add botwright

For local development in this repository:

uv sync

Discord Setup

Create two bots in the same dedicated test guild:

• Target bot: the bot you want to test.
• Tester bot: a separate bot account controlled by Botwright.

The tester bot needs:

• Send Messages
• Read Message History
• View Channel
• Manage Channels if Botwright will create temporary channels
• Message Content Intent enabled in the Discord Developer Portal

If your target bot ignores messages from bot accounts, add a test-mode bypass. For example:

if message.author.bot and os.getenv("TEST_MODE") != "1":
    return

Configuration

Botwright reads environment variables

Required:

export BOTWRIGHT_TESTER_TOKEN="..."
export BOTWRIGHT_GUILD_ID="..."
export BOTWRIGHT_TARGET_BOT_ID="..."

Optional:

Variable	Default	Description
BOTWRIGHT_CHANNEL_ID	unset	Existing text channel to use instead of creating temporary channels.
BOTWRIGHT_CHANNEL_PREFIX	botwright-	Prefix for temporary channel names.
BOTWRIGHT_DEFAULT_TIMEOUT	10	Default seconds to wait for expected messages.
BOTWRIGHT_READY_TIMEOUT	30	Seconds to wait for the tester bot to connect.
BOTWRIGHT_KEEP_CHANNELS	never	never, failed, or always.

Command-line options override environment variables:

pytest tests/e2e \
  --botwright-timeout=20 \
  --botwright-keep-channels=failed \
  --botwright-channel-prefix=mybot-

Available options:

• --botwright-check
• --botwright-channel-id
• --botwright-channel-prefix
• --botwright-timeout
• --botwright-ready-timeout
• --botwright-keep-channels=never|failed|always
• --botwright-no-banner

Validate Discord configuration without running tests:

botwright check

The same check is also available through pytest:

pytest --botwright-check

Both commands connect the tester bot, verify the guild, verify tester and target membership, check fixed-channel permissions when BOTWRIGHT_CHANNEL_ID is set, and then exit.

Writing Tests

Listener before sender

Use expect_reply() or expect_message() when the bot may reply immediately. The listener is registered before the message is sent.

@pytest.mark.asyncio
async def test_help_embed(session: TestSession):
    async with session.expect_reply() as reply:
        await session.send("!help")

    assert reply.value is not None
    assert reply.value.embeds
    assert reply.value.author.id == session.target_bot_id

One-shot send and wait

Use send_and_wait() for simple request-response tests.

@pytest.mark.asyncio
async def test_echo(session: TestSession):
    reply = await session.send_and_wait("!echo hello")

    assert reply.content == "hello"

Passive waits

Use wait_for_message() when something else already triggered the response.

@pytest.mark.asyncio
async def test_background_notification(session: TestSession):
    message = await session.wait_for_message(
        predicate=lambda msg: "done" in msg.content.lower(),
        timeout=30,
    )

    assert message.author.id == session.target_bot_id

By default, Botwright waits for messages from the configured target bot. Use ANY_AUTHOR when a test should accept a message from any user or bot:

from botwright import ANY_AUTHOR


@pytest.mark.asyncio
async def test_anyone_can_trigger_audit_log(session: TestSession):
    message = await session.wait_for_message(
        from_user_id=ANY_AUTHOR,
        predicate=lambda msg: "audit complete" in msg.content.lower(),
    )

    assert message.channel.id == session.channel.id

Fixed-Channel Mode

By default, Botwright creates a temporary channel for each test and deletes it after the test finishes. This gives strong isolation.

Some bots only monitor a specific channel. In that case, use fixed-channel mode:

pytest tests/e2e --botwright-channel-id=123456789012345678

or per test:

@pytest.mark.botwright(channel_id=123456789012345678)
@pytest.mark.asyncio
async def test_channel_bound_bot(session: TestSession):
    reply = await session.send_and_wait("!status")

    assert reply.content

In fixed-channel mode:

• Botwright does not create or delete the channel.
• Manage Channels is not required.
• Botwright still filters messages by channel ID and target bot ID.
• Test isolation is your responsibility. Avoid parallel tests in the same fixed channel unless your predicates make each expected response unique.

Ordered Flows

Discord e2e tests often describe workflows, and workflows are usually ordered. Prefer writing those workflows as one explicit async test instead of relying on cross-test ordering:

@pytest.mark.asyncio
async def test_onboarding_flow(session: TestSession):
    welcome = await session.send_and_wait("!start")
    assert "welcome" in welcome.content.lower()

    next_step = await session.send_and_wait("!next")
    assert next_step.embeds

This keeps failures local: pytest reports the flow that failed, and the code shows the exact sequence that led to the failure.

If you need ordered test functions, use an ordering plugin such as pytest-order. Botwright does not provide its own ordering layer because pytest already has good ecosystem support for that problem.

Pytest Integration

Botwright registers a pytest plugin named botwright.

Installed packages are auto-discovered by pytest. If plugin auto-discovery is disabled, load it explicitly:

pytest -p botwright.plugin

Fixtures:

Fixture	Scope	Description
botwright_config	session	Validated Botwright configuration.
tester_bot	session	Connected tester discord.Client.
test_channel	function	Temporary or configured text channel.
session	function	TestSession bound to the current channel.

Botwright automatically runs tests using these fixtures on pytest-asyncio's session event loop. This keeps Discord client, HTTP, and gateway state on the same loop.

If you explicitly mark a Botwright test with @pytest.mark.asyncio, use loop_scope="session":

@pytest.mark.asyncio(loop_scope="session")
async def test_ping(session: TestSession):
    ...

Botwright rejects conflicting loop scopes because discord.py clients and HTTP sessions cannot be moved between event loops safely.

Bot lifecycle

tester_bot is session-scoped. One pytest process starts one tester bot and shares it across all Botwright tests in that process, even when those tests live in multiple files:

pytest tests/e2e

Separate pytest invocations start separate tester bot sessions:

pytest tests/e2e/test_a.py
pytest tests/e2e/test_b.py

If you use pytest-xdist, each worker process has its own session-scoped fixtures. That means each worker starts its own tester bot. For now, run Botwright tests without xdist unless you intentionally partition channels and bot accounts per worker.

Per-test marker

Use @pytest.mark.botwright(...) to override settings for one test:

@pytest.mark.botwright(timeout=30, keep_channel=True)
@pytest.mark.asyncio
async def test_slow_flow(session: TestSession):
    reply = await session.send_and_wait("!slow")

    assert reply.content == "complete"

Supported marker arguments:

• timeout: default wait timeout for that test's session
• keep_channel: keep or delete a temporary channel for that test
• channel_id: use an existing text channel for that test

API Reference

TestSession

session.channel : The Discord text channel for the current test.

session.target_bot_id : The configured target bot user ID.

await session.send(content) : Send a message as the tester bot. Returns the tester bot's discord.Message.

await session.wait_for_message(from_user_id=None, predicate=None, timeout=None) : Wait for a matching message in the current channel. By default, waits for the configured target bot.

async with session.expect_message(...) as message : Register a message waiter before the code inside the context block runs. The resulting message is available as message.value after the block exits.

async with session.expect_reply(...) as reply : Convenience helper for the common target-bot reply case. It uses the same waiter machinery as expect_message(), but reads better in request-response tests.

await session.send_and_wait(content, from_user_id=None, predicate=None, timeout=None) : Register a reply waiter, send a message, and return the matching response.

Predicates receive a real discord.Message:

reply = await session.send_and_wait(
    "!help",
    predicate=lambda msg: bool(msg.embeds),
)

assert reply.embeds[0].title

Debugging

Use verbose pytest output while developing:

pytest tests/e2e -s -v --botwright-keep-channels=failed

Use --botwright-no-banner in CI if you prefer compact logs:

pytest tests/e2e --botwright-no-banner

For the standalone check command, use:

botwright check --no-banner

Botwright prints setup diagnostics:

• Configuration loaded
• Tester bot connected
• Guild membership verified
• Channel selected or created
• Required permissions verified
• Temporary channel deleted or retained

Timeout errors include:

• Expected channel ID and author ID
• Gateway event counters
• Messages observed by the wait
• Recent channel history, including embed counts, titles, descriptions, and field counts when available

If a test fails, --botwright-keep-channels=failed leaves the Discord channel in place so you can inspect the conversation.

Run the setup check before debugging individual tests:

botwright check

Example Project

Run the included demo target bot:

TEST_MODE=1 TARGET_BOT_TOKEN="..." python examples/target_bot/bot.py

Run the example tests:

pytest examples/ -v

Current Limitations

• Slash commands are not supported. Discord does not allow one bot account to invoke another bot's slash commands through the public bot API.
• Botwright currently focuses on text messages. Reactions, components, modals, and voice workflows are future API candidates.
• Fixed-channel tests are not isolated unless your test design makes them isolated.