CableProbe

CableProbe is an open-source defensive USB cable analysis tool for Linux (developed and tested on Raspberry Pi OS / Debian, and reasonably portable to other Debian/Ubuntu systems).

• Home page: https://www.cableprobe.com
• Source & downloads: https://github.com/rosscooney/CableProbe (releases)
• Package: cableprobe on PyPI

CableProbe watches a sacrificial Linux host while you connect an unknown USB-C-to-USB-C cable, then compares before, during and after to surface hidden HID devices, rogue network gadgets, mass storage, serial channels, transient enumeration and kernel errors.

CableProbe only observes, records and reports. It does not inject payloads, exploit anything, capture credentials, establish persistence or provide remote access. It is a monitoring tool for a sacrificial test host.

⚠️ CableProbe cannot prove that a cable is safe or uncompromised. A clean report means CableProbe did not observe anything notable during that session, not that the cable is benign. Use it as one input to your own judgement.

⚠️ Run this on a dedicated, disposable Raspberry Pi that holds no sensitive data and is isolated from networks you care about. Treat any cable under test as hostile hardware.

How it works

A session has three phases:

CableProbe then compares the three phases and writes a structured JSON report describing everything that appeared, disappeared or changed in correlation with the cable, and runs a set of YAML-configurable detection rules over those differences to produce prioritised findings.

Probes (observation only)

Probes that need hardware or kernel interfaces the host does not expose (no Type-C class, no /sys/bus/pci, …) report themselves unavailable in cableprobe check and are skipped — that is not an error.

Install

Requires Python 3.11+. See DISTRIBUTING.md for the full picture; the short version:

# 1. pip / pipx on an existing Raspberry Pi OS / Debian host
pipx install cableprobe
sudo apt install usbutils util-linux        # CLI tools CableProbe shells out to

# 2. one command on a Pi (isolated venv under /opt/cableprobe)
sudo ./scripts/install.sh                    # sudo scripts/uninstall.sh to remove

# 3. from a checkout, for development
git clone https://github.com/rosscooney/CableProbe cableprobe && cd cableprobe
python3 -m venv .venv && . .venv/bin/activate
pip install -e ".[dev]"

For a disposable Raspberry Pi image, build your own from stock Raspberry Pi OS using the pi-gen custom stage in packaging/pi-gen/ — CableProbe ships the recipe, not a prebuilt image.

pyudev needs libudev (present on Raspberry Pi OS / Debian). On non-Linux hosts CableProbe still installs and its --help / check / report commands work, but the live probes are unavailable.

Usage

# Check the host is ready
cableprobe check

# Run a session (you will be prompted before each phase)
sudo cableprobe run --name "suspect-cable-01" \
    --baseline 30 --test 90 --post-test 30

# Unattended / rig mode: advance phases on a timer instead of prompts
sudo cableprobe run --auto --baseline 20 --test 60 --post-test 20

# Inspect a saved report
cableprobe report cableprobe-sessions/2026*.cableprobe.json
cableprobe report <file> --format json | jq .

# See / customise detection rules
cableprobe rules
cableprobe rules my-rules.yaml

Running with sudo is recommended: the kernel-log and udev-attribute probes see more detail with privileges.

Exit codes

cableprobe run --fail-on-findings exits 10 / 20 / 30 for the highest finding severity (medium / high / critical), otherwise 0. Without the flag, run always exits 0 on a completed session.

Configuration

Optional YAML config (--config cableprobe.yaml):

session:
  baseline_seconds: 30
  test_seconds: 90
  post_test_seconds: 30
  sample_interval_seconds: 2.0
probes:
  # default: all probes; list a subset to narrow the session
  enabled: [udev_monitor, usb, usb_descriptors, usb_topology, usbc_pd, block,
            mounts, network, routing, listeners, input, serial, audio, video,
            pci, kernel_modules, process, kernel_log]
  kernel_log_backend: auto        # auto | journalctl | dmesg
  kernel_log_keywords: []         # extra case-insensitive substrings to keep
  capture_process_cmdline: true   # false => store only the executable name
rules_file: null                  # null => packaged default rules
output_dir: ./cableprobe-sessions

Reports are written with mode 0600 (they can contain host details, MAC addresses and process command lines). All device-supplied text (USB descriptor strings, device names, kernel log lines) is stripped of control characters and length-bounded before it is stored or shown, so a hostile cable cannot inject terminal escape sequences via the report or the console summary.

Detection rules

Rules live in YAML (see cableprobe/data/default_rules.yaml). Each rule matches a phase delta and raises a finding:

- id: hid-keyboard-appeared-on-connect
  title: HID keyboard appeared while the unknown cable was connected
  severity: high
  rationale: >
    A keyboard-class HID device that enumerates only when the cable is
    connected is the classic BadUSB signature.
  match:
    change: appeared          # appeared | disappeared | modified
    first_seen_phase: test    # baseline | test | post_test
    kind: [input_device, hid_device]
    attributes:
      any:
        - { key: ID_INPUT_KEYBOARD, equals: "1" }

Match keys: change, kind, first_seen_phase, reverted_after_disconnect, transient, label_regex, event_action, and attributes.all / attributes.any (conditions: equals, not_equals, exists, contains, regex).

Report structure

{
  "metadata":  { "session_name", "host", "config", "probes_used", "probe_warnings", ... },
  "phases":    { "baseline": {...}, "test": {...}, "post_test": {...} },
  "deltas":    [ { "change", "kind", "identity", "label",
                   "first_seen_phase", "present_in",
                   "reverted_after_disconnect", "transient",
                   "attributes", "attribute_changes", "related_events" } ],
  "findings":  [ { "rule_id", "title", "severity", "rationale", "evidence" } ],
  "summary":   { "delta_count", "cable_correlated_change_count",
                 "findings_by_severity", "highest_severity", ... }
}

Development

pip install -e ".[dev]"
pytest

The analysis, rules and report layers are pure and fully unit-tested without hardware. Each probe keeps a pure parser (of lsusb / lsblk / /proc output) or sysfs-tree scanner that is tested against captured samples or a fake /sys tree — see tests/test_probes_parsing.py and tests/test_probes_new.py.

The source lives at https://github.com/rosscooney/CableProbe. See CONTRIBUTING.md for how to contribute, SECURITY.md for how to report vulnerabilities privately, and RELEASING.md for how maintainers cut a release to PyPI.

Scope / non-goals for v0.1

• CLI only — no web dashboard.
• No cable electrical / PD (power-delivery) analysis yet.
• No offensive capability of any kind, by design.

Third-party dependencies

CableProbe does not copy or vendor third-party source code. It depends on a small set of Python libraries and, at runtime, invokes standard Linux command-line tools as separate, independently installed programs. See NOTICE.md and the "Third-party licensing" note below in the repo history / docs.

Direct Python dependencies and their licences:

Note on pyudev: pyudev is LGPL-2.1-or-later. It is a normal, separately installed Python dependency that CableProbe imports; it is not vendored or modified. Distributing an MIT-licensed project that depends on an unmodified LGPL library is standard practice, provided pyudev remains replaceable and its source stays available (it is, from PyPI). If you redistribute CableProbe as a bundled binary/image, keep pyudev as a replaceable component and include its licence text. The Linux CLI tools CableProbe shells out to (lsusb/usbutils, lsblk/dmesg/util-linux — GPL-2.0; journalctl/systemd — LGPL-2.1) are invoked as independent programs and do not affect CableProbe's MIT licensing.

Licence

CableProbe is open-source software created by Stable State Consulting Ltd and released under the MIT License.

Copyright © 2026 Stable State Consulting Ltd.

See LICENSE for details.