Skip to main content

candat

A terminal text editor with emacs keybindings, built on Textual.

Demo

candat — a terminal editor with emacs keybindings

More than the basics, without leaving the terminal — emacs keys, split windows on the same file, live markdown preview, a CSV table viewer, a large-file pager, and a real shell inside.

Install

From PyPI, as a standalone tool (recommended — gives you a global candat command in its own isolated environment):

uv tool install candat
# or, with pipx (needs Python >= 3.10):
pipx install candat

Or with plain pip into the environment of your choice: pip install candat. To try it once without installing anything permanently: uvx candat.

The development version installs straight from GitHub:

uv tool install git+https://github.com/kavonrtep/candat

Requires Python >= 3.10, on Linux or macOS.

Run

candat [FILE|DIR ...]

Passing a directory sets the file-tree root; files are opened in buffers.

Keys (so far)

Key Action
C-x C-f find file (opens new file if it doesn't exist)
C-x C-s save buffer
C-x C-w write buffer to another file
C-x C-q toggle read-only (status bar shows %%)
C-x w toggle soft wrap for this buffer
C-x C-r open a file read-only
C-x k kill buffer
C-x b buffer list (Enter switches; next buffer preselected)
C-x o move focus: tree → window(s) → terminal
C-x 3 / C-x 2 split window side-by-side / stacked (same buffer, linked view)
C-x 0 / C-x 1 close this window / the others
C-x C-c quit (confirms if unsaved buffers)
C-x C-x exchange point and mark
C-x h mark whole buffer
C-x u, C-/, C-z undo
C-f C-b C-n C-p C-a C-e char/line movement
M-f M-b word movement
C-v M-v page down / up
M-< M-> beginning / end of buffer
C-space set mark (movement extends region)
C-k kill line (consecutive kills accumulate)
C-w / M-w kill / copy region
C-y / M-y yank / yank-pop
M-d / M-backspace kill word forward / backward
M-up / M-down move current line (or marked block) up / down
C-s / C-r incremental search (smart case, wraps)
M-% query-replace (y/n/!/q)
C-x g project-wide regex search (results list, Enter jumps)
M-; toggle line comment
C-c C-c send region or current line to the terminal REPL
C-x t toggle terminal panel (keys pass through raw; only C-x is reserved)
Shift+PgUp/PgDn terminal scrollback (typing snaps back)
C-c C-v alternate view: markdown preview cycle, or table view of the buffer
M-x, Ctrl+Shift+P command palette
C-g / Esc cancel chord / prompt / search / mark

ESC acts as the Meta prefix, so ESC w == M-w, ESC x == M-x, etc. Tab completes paths in the find-file and write-file prompts, listing the choices (navigable with arrows, Enter to pick) when more than one matches.

Open files are watched for external changes: clean buffers reload automatically; buffers with local edits ask before discarding them.

Text files over 10 MB open in a less-style pager instead of the editor: the file stays on disk behind a sparse line index (multi-GB files open with bounded memory, with progress shown while indexing), and searches scan in the background so the UI never freezes — C-g cancels one mid-flight. Scroll (keys or mouse wheel), g/G, //? and C-s/C-r search with all visible matches highlighted, C-x w wrap, M-g goto line. F follows a growing file like less +F (rotation-aware; any key stops), and e loads the file into a real editor buffer if you insist. Binary files are shown as a placeholder, and the truncated/binary views refuse to save, so a partial view can never overwrite the real file.

.csv and .tsv files open in a table viewer (inspired by csvlens): a sticky header, row cursor, and original file line numbers in the gutter. There is no row limit: big files get a windowed table backed by a sparse index (built in the background — the table shows and scrolls immediately), so ten million rows cost the same as a hundred, G jumps straight to the last row, and search scans the whole file once and then steps match-to-match instantly. And it isn't just for CSV: any buffer — a .tab, .gff, a log, even an unsaved one — switches to a table with C-c C-v. The delimiter is auto-detected; press d in the table to re-pick it (, ; | tab space or any character) if the guess was wrong, and add suffixes to table_suffixes in the config to make more file types open as tables automatically. In the table: / (or C-s) searches — literal with smart case, the same dialect as everywhere else — with the matched text highlighted in the cells (Esc clears), C-s/n and C-r/N step to the next / previous match, & filters rows by regex, g/G jump to top/bottom. C-c C-v switches back to the raw text. The table is read-only.

The file-tree icons are emoji by default; if your terminal renders them poorly (Konsole, some others), set CANDAT_TREE_ICONS=nerd (needs a Nerd Font) or =ascii, or switch live with M-x cycle-tree-icons — the choice is saved.

Configuration

~/.config/candat/config.toml (XDG aware), all keys optional:

tree_icons = "emoji"     # or "nerd" / "ascii"; cycle-tree-icons saves here
pager_wrap = false       # start the large-file pager with soft wrap on
tabstop = 8              # tab width in the pager
restore_session = true   # reopen last session's files (see below)
table_suffixes = [".csv", ".tsv"]   # files that open straight into the table

Starting candat without file arguments reopens the files you had open the last time you quit in that directory — tabs, cursor positions, scroll, and the active buffer (per project root, kept in ~/.local/state/candat/). Passing files on the command line skips the restore.

Files are read and written in whatever encoding and line ending they arrive in: UTF-8 by default, a UTF-8/UTF-16 byte-order mark is honoured, and anything else falls back to latin-1 so the bytes round-trip untouched (the status bar shows the encoding and CRLF/CR when they aren't plain UTF-8/LF). Saves are atomic — written to a temp file and renamed over the original — so a crash or full disk never leaves a half-written file.

Unsaved edits are snapshotted to ~/.cache/candat/recovery/ every 20 seconds and on a crash; a clean quit clears them, and if any survive they are reported (never auto-applied) on the next launch. Crash logs (including hard faults caught by faulthandler) land in ~/.cache/candat/.

The file tree has a filter box on top: press / while the tree is focused (or click it), type to narrow the tree to files whose path matches, Esc clears it. The file tree opens files on selection. The default theme is candat-light (high-contrast dark-on-white). The markdown preview is linked: it follows the editor's scroll position.

Stability

The keybindings are fixed emacs bindings by design — there is no rebinding layer, and that is a deliberate choice, not a missing feature. candat is a comfortable emacs-muscle-memory editor, not a configurable one.

From 1.0 onward the project follows semantic versioning: the config-file keys, the CANDAT_TREE_ICONS variable, the command-line interface, and the on-disk locations of the config, session, and recovery files are treated as stable and will not change incompatibly within a major version. The keybindings and the M-x command names are equally stable. Behaviour details not listed here (exact status-bar wording, colours, internal module layout) may still change.

Development

uv run pytest

Release history is in CHANGELOG.md.

Roadmap

  1. Skeleton: tree / tabs / status bar / C-x chords / open & save
  2. Emacs editing: kill ring, C-s/C-r isearch, mark & region, M-x palette
  3. Markdown mode: side-by-side live preview (debounced)
  4. Terminal panel (full PTY: forkpty + pyte)
  5. Polish: terminal scrollback, dirty-line rendering, path completion in prompts, buffer list, scroll-synced preview, R/xml/html highlighting

Syntax highlighting covers python, markdown, json, yaml, bash, html, xml, css, toml, js, sql, go, rust, java, R, and config formats — INI/.cfg/ .conf, Makefiles, Dockerfiles, and shell dotfiles (.bashrc, .env, …).

Metadata

Release files for candat 1.0.0

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for candat 1.0.0
File Size Uploaded Provenance Actions
candat-1.0.0.tar.gz 71.4 kB Without provenance Details for candat-1.0.0.tar.gz

Built distribution (wheel)

Table of built distributions (wheels) for candat 1.0.0
File Interpreter ABI Platform Actions
candat-1.0.0-py3-none-any.whl Python 3 none any Details for candat-1.0.0-py3-none-any.whl

Total release size: 154.4 kB

Release files / candat-1.0.0.tar.gz

Download URL candat-1.0.0.tar.gz
Size 71.4 kB
Tags Source
SHA-256 checksum
How to use checksums
02f083b2cec5e2311d5b21c30fe0c597ff0214a75117cf0282212f15371cbc89
BLAKE2b-256 checksum
How to use checksums
762f251ce442aef447da609d0ce2d3cc9af9b40aba698b678fa27c04a7f9ca5a
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via uv/0.11.28 {"installer":{"name":"uv","version":"0.11.28","subcommand":["publish"]},"python":null,"implementation":{"name":null,"version":null},"distro":{"name":"Ubuntu","version":"24.04","id":"noble","libc":null},"system":{"name":null,"release":null},"cpu":null,"openssl_version":null,"setuptools_version":null,"rustc_version":null,"ci":true}

Release files / candat-1.0.0-py3-none-any.whl

Download URL candat-1.0.0-py3-none-any.whl
Size 83.0 kB
Tags Python 3
SHA-256 checksum
How to use checksums
843fb831bd8eaa47f6d2f16a2cfc8027bbaac68248e60d76fb49165430b8e70e
BLAKE2b-256 checksum
How to use checksums
d7b1ed13a942a840c94c4bfbc58c6c287df4632a982f9302c8cea2dca91fbe03
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via uv/0.11.28 {"installer":{"name":"uv","version":"0.11.28","subcommand":["publish"]},"python":null,"implementation":{"name":null,"version":null},"distro":{"name":"Ubuntu","version":"24.04","id":"noble","libc":null},"system":{"name":null,"release":null},"cpu":null,"openssl_version":null,"setuptools_version":null,"rustc_version":null,"ci":true}

Security for candat 1.0.0

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

No provenance found

None of the files in this release were uploaded with provenance metadata.

A note on package security

PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.

To learn more about protecting yourself from malicious actors, visit our package security documentation.

Anthropic, PBC Visionary sponsor Bloomberg Visionary sponsor Hudson River Trading Visionary sponsor Meta Visionary sponsor NVIDIA Visionary sponsor Microsoft Sustainability sponsor Depot Continuous Integration AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Sentry Error logging StatusPage Status page