CarConnectivity-connector-lucid

A CarConnectivity connector for Lucid Motors vehicles (Air and Gravity), built on python-lucidmotors.

Read-only by default. It polls the same mobile API the Lucid app uses and populates the CarConnectivity model: state, odometer, battery level / range / capacity / cell temperatures, charging state and target, position, doors and locks, climatization, software version. Reads never wake the car, so polling costs nothing in battery drain. Commands (lock, climate, charging, trunk and the rest) exist from 0.2.0 but stay off unless the config turns them on; see Commands.

Verified against a 2026 Gravity on 2026-09-03.

Install

pip install carconnectivity-connector-lucid

Python 3.12 or newer. The connector logs in with a refresh token only (login_with_refresh_token(), in lucidmotors 1.4.2 and later), so there is no password on disk.

Credentials

The connector needs only a Lucid refresh token, stored in a JSON file:

{"refresh_token": "…"}

Mint one once with the library's login example (username + password, interactively), save the refresh_token it returns, and never store the password. The token does not rotate, so the file can be mounted read-only. Point the config at it — never paste the token into the config file itself.

Config

{
    "carConnectivity": {
        "connectors": [
            {
                "type": "lucid",
                "config": {
                    "refresh_token_file": "~/.config/lucid-token.json",
                    "interval": 60,
                    "driving_interval": 15
                }
            }
        ]
    }
}

All options in doc/Config.md.

Commands

Off by default. Without the option the connector creates no command objects at all and the charge limit is read-only, so nothing CarConnectivity exposes (the REST API, MQTT, the web UI) can send anything to the car. To turn them on, add "commands": true to the connector's config. It must be the JSON boolean true; a string such as "true" is refused at startup.

How they behave:

• Only commands wake the car. If the last poll saw the car asleep (any sleep or cloud power state, the same rule the poller reports), the command wakes it first, waits a few seconds, then sends. Polling still never wakes it.
• Sent once. Nothing is retried. A retried unlock or trunk is a second one if the first landed and only its answer was lost, so a failure comes back as an error and the decision is yours. A command not answered within 60 seconds, counting any login and wake it needed, is reported as such; check the car before sending it again. One that waited out the 60 seconds behind a poll was never sent, and says so.
• Errors are short. Rate limits, rejected sessions and refusals from the car all come back as a CarConnectivity CommandError naming the command and Lucid's reason.
• Same session, same rate limit. Commands use the poller's login and count against the same per-account allowance. A successful one triggers an early poll so the model shows the result.
• A climatization temperature in Fahrenheit is converted; anything outside 10 to 35 °C is refused as a probable unit mistake.

Session lifetime — read this if you run it long

interval is how often the car is polled, minimum 60 s. driving_interval is used instead while a car is driving or about to be, minimum 15 s, defaulting to interval so nothing changes unless you ask. A minute is plenty for a car on a driveway and too coarse for one moving: at 60 s a drive is a handful of points with straight lines between them. Driving is a small share of any day, so the extra requests are few.

Both are the spacing between polls, not the pause after one. A fetch of a sleeping car returns in about a tenth of a second, but Lucid has to reach a car that is awake and driving, and that fetch takes on the order of fifteen seconds — so waiting the full interval after it made a 15 s setting a 31 s cycle. The wait is the interval less however long the fetch took, and the fetch time is logged at debug level if you want to see it.

One account, one client. Lucid rate-limits per account, not per connection, and it says nothing useful when it does: RESOURCE_EXHAUSTED with an empty body, no quota and no retry-after. Running a second logger against the same credentials — another CarConnectivity instance, a Home Assistant integration, a bridge of your own — competes for the same allowance, and the refusals arrive mid-drive when both are polling hardest. When one does arrive the connector waits 5 s, then 10, 20, 40 and so on to a 15-minute ceiling, and drops back to 5 s as soon as a poll succeeds.

A Lucid session's bearer token lasts five minutes and the server enforces that to the second. The connector refreshes only when under 60 s remain, never on every poll: the refresh endpoint is rate-limited, back-to-back refreshes return the same session anyway, and a client that refreshed per poll was throttled thousands of times before this was measured. Keep interval under 240 s or raise the refresh margin.