casambi-bt-skk 0.4.0b1.post8

A minimal, unofficial implementation of a bluetooth client for casambi devices

A bluetooth based Python library for controlling Casambi networks

This library provides a currently alpha quality interface to Casambi-based lights over Bluetooth. The author is not associated with Casambi and the implementation is based on his own analysis of the protocol. This interface is not feature complete and was only tested with a very small network.

If you want to check out my (slow) progress in writing a integration for Home Assistant using this library you can take a look at https://github.com/lkempf/casambi-bt-hass/.

For a more mature solution using a gateway and the official Casambi API have a look at https://github.com/hellqvio86/aiocasambi.

Getting started

This library is available on PyPi:

pip install casambi-bt

Have a look at demo.py for a small example.

MacOS

MacOS does not expose the Bluetooth MAC address via their official API, if you're running this library on MacOS, it will use an undocumented IOBluetooth API to get the MAC Address. Without the real MAC address the integration with Casambi will not work. If you're running into problems fetching the MAC address on MacOS, try it on a Raspberry Pi.

Casambi network setup

If you have problems connecting to the network please check that your network is configured appropriately before creating an issue. The network I test this with uses the Evoultion firmware and is configured as follows (screenshots are for the iOS app but the Android app should look very similar):