catap

Python bindings and recording utilities for Apple's Core Audio process-tap API (macOS 14.2+). catap captures outgoing process audio through Core Audio taps, without installing or selecting a third-party loopback driver.

Install

pip install catap

catap is macOS-only; importing it on other platforms raises ImportError. It targets macOS 14.2 and newer. CI covers CPython 3.11 through 3.14 plus free-threaded CPython 3.13t and 3.14t on macOS. Current development is on Apple Silicon and macOS 26.2.

Recording requires the bundled native Core Audio dylib. Wheels include a universal2 build; source builds require the macOS command-line developer tools.

Quick start

CLI:

catap record Safari -d 10 -o safari.wav    # record an app for 10 seconds
catap record --system -d 10 -o mix.wav     # record a global process-output mix
catap list-apps                            # see what's producing audio

Python:

from catap import record_process

session = record_process("Safari", output_path="safari.wav")
session.record_for(10)

print(f"Recorded {session.duration_seconds:.2f} seconds")

What it does

• Record a single app, a global process-output mix, or an existing visible tap.
• Exclude selected apps from a global recording.
• Mute an app while recording it, so it's captured but not played aloud.
• Target a specific output device stream when building a tap.
• Write WAV files, or stream PCM buffers to your own callback.
• Use a bounded audio queue: if the worker falls behind, buffers are dropped and the count is reported on stop, instead of growing memory without bound.

Scope

catap is a process-output capture library. It is not a microphone/input-device recorder, an AudioServerPlugIn implementation, or a virtual audio driver.

The current recorder path reads one tap through one private HAL aggregate device. It accepts packed, interleaved linear PCM tap formats and rejects non-interleaved, multi-buffer, compressed, padded, or otherwise unusual formats.

The --system and record_system_audio() paths build a global Core Audio tap: they capture process output that Core Audio exposes to taps. Long-running captures across sleep/wake, route changes, source-process restarts, and default output-device changes are not covered yet. See docs/core-audio-notes.md for the short Core Audio notes.

Usage

Command Line

Common commands:

catap list-apps
catap list-apps --all
catap record Safari -d 30 -o safari.wav
catap record Spotify --mute -d 60 -o spotify.wav
catap record --system -e Music -e Zoom -d 30 -o system.wav

Run catap record --help for the full set of recording options.

Python API

from catap import record_process

# High-level API: catap manages tap creation, startup, shutdown, and cleanup.
session = record_process("Safari", output_path="output.wav")
session.record_for(5)

print(f"Recorded {session.duration_seconds:.2f} seconds")

If you pass on_buffer=..., the callback runs on catap's background worker thread so the Core Audio callback stays lightweight. The callback receives an AudioBuffer with bytes that are safe to keep, frame count, stream format metadata, and Core Audio timing metadata:

from catap import AudioBuffer, record_process

def on_buffer(buffer: AudioBuffer) -> None:
    print(buffer.frame_count, buffer.format.sample_rate, buffer.input_sample_time)

session = record_process("Safari", on_buffer=on_buffer)
session.record_for(5)

Do not call session.stop() or recorder.stop() directly from on_buffer. The callback runs on the worker that stop() must join and finalize. Signal the owning thread instead, then let that thread stop the session:

from threading import Event

from catap import AudioBuffer, record_process

stop_requested = Event()
frames_received = 0

def on_buffer(buffer: AudioBuffer) -> None:
    global frames_received
    frames_received += buffer.frame_count
    if frames_received >= buffer.format.sample_rate * 5:
        stop_requested.set()

session = record_process("Safari", on_buffer=on_buffer)
session.start()
try:
    stop_requested.wait()
finally:
    session.stop()

Once recording has started, session.stream_format exposes the callback AudioStreamFormat without waiting for the next buffer.

To control the recording lifetime yourself, use the session as a context manager:

import time
from catap import record_process

with record_process("Safari", output_path="output.wav", mute=False) as session:
    time.sleep(5)

print(f"Recorded {session.duration_seconds:.2f} seconds")

For streaming-only mode, pass on_buffer=... and omit output_path.

By default, catap queues up to 256 pending audio buffers before treating a slow writer or callback as a capture failure. Tune this with max_pending_buffers=... on record_process, record_system_audio, RecordingSession, or AudioRecorder.

A name query that matches multiple processes raises with the candidates in the error rather than picking one arbitrarily.

Mute Behavior

With record_process(..., mute=True), the app stays muted for the lifetime of the recording session. The lower-level mute modes behave differently if the tap outlives the recorder; see docs/mute-behavior.md.

Low-level API

from catap import (
    AudioRecorder,
    TapDescription,
    TapMuteBehavior,
    create_process_tap,
    destroy_process_tap,
    find_process_by_name,
    list_audio_taps,
    record_tap,
)

process = find_process_by_name("Safari")
print(f"Found: {process.name} (PID: {process.pid})")

tap_desc = TapDescription.stereo_mixdown_of_processes([process.audio_object_id])
tap_desc.name = "My Recording"
tap_desc.mute_behavior = TapMuteBehavior.UNMUTED  # or MUTED

import time

tap_id = create_process_tap(tap_desc)
try:
    recorder = AudioRecorder(tap_id, "output.wav")
    recorder.start()
    try:
        time.sleep(5)
    finally:
        recorder.stop()
    print(f"Recorded {recorder.duration_seconds:.2f} seconds")
finally:
    destroy_process_tap(tap_id)

If another app has already created a non-private tap, you can discover it and attach a recorder without taking ownership of the tap itself:

from catap import list_audio_taps, record_tap

tap = next(tap for tap in list_audio_taps() if tap.name == "Shared Mix")
session = record_tap(tap, output_path="shared-mix.wav")
session.record_for(5)

Device-targeted taps can be built directly from discovered output streams:

from catap import TapDescription, find_process_by_name, list_audio_devices

process = find_process_by_name("Safari")
device = next(device for device in list_audio_devices() if device.is_default_output)
stream = device.output_streams[0]

tap_desc = TapDescription.of_processes_for_device_stream(
    [process.audio_object_id],
    stream,
)
tap_desc.name = "Safari on default speakers"

Permissions

Core Audio taps require system-audio recording permission. macOS prompts the first time an app starts recording from an aggregate device that contains a tap; if access was previously denied, enable it in System Settings.

When you run from a terminal (for example uv run catap record Spotify), macOS attributes capture to the terminal app, so grant permission to Terminal, iTerm, or whichever host is launching catap.

App bundles using Core Audio taps should include NSAudioCaptureUsageDescription in their Info.plist. Sandboxed apps still need their normal sandbox configuration; Core Audio taps do not add a separate system-audio-capture entitlement.

How it works

1. Process enumeration: reads kAudioHardwarePropertyProcessObjectList to find audio processes.
2. Tap creation: builds a CATapDescription through PyObjC and calls AudioHardwareCreateProcessTap.
3. Aggregate device: creates a private Core Audio aggregate device containing the tap, matching Apple's documented tap-capture path. catap destroys the aggregate when recording stops.
4. Audio capture: registers the bundled native dylib's AudioDeviceIOProc and copies tap audio into a preallocated native ring.
5. Worker output: a Python drain thread feeds the background worker, which writes WAV data and invokes optional on_buffer callbacks outside the Core Audio real-time path.

The Core Audio notes live in docs/core-audio-notes.md. Recorder callback and queueing design is in docs/performance.md.

Development

git clone https://github.com/sbetko/catap.git
cd catap
uv sync --group dev

Quality checks

uv run --group dev ruff check .
uv run --group dev ty check --error-on-warning src tests
uv run --group dev pytest
uv run --group dev python -m build
uv run --group dev twine check dist/*

Free-threaded checks:

uv python install 3.13t 3.14t
uv run --python 3.13t --group dev pytest
uv run --python 3.14t --group dev pytest
CATAP_RUN_INTEGRATION=1 uv run --python 3.14t --group dev pytest \
  tests/test_integration.py::test_record_system_audio_smoke

Integration smoke test

CATAP_RUN_INTEGRATION=1 uv run --group dev pytest -m integration

Opt-in. Exercises the real macOS Core Audio bridge: process enumeration and a short recording that covers tap startup, shutdown, and WAV finalization.

See RELEASE.md for the release checklist.

License

MIT