cbc-syslog 1.1.0

Syslog Connector for the Carbon Black Cloud

Carbon Black Cloud Syslog Connector

The syslog connector lets administrators forward alert notifications and audit logs from their Carbon Black Cloud instance to local, on-premise systems, and:

• Generates pipe-delimited syslog messages with alert metadata identified by the streaming prevention system
• Aggregates data from one or more Carbon Black Cloud organizations into a single syslog stream
• Can be configured to use UDP, TCP, or encrypted (TCP over TLS) syslog protocols

Helpful Links

• Updating PATH in a Windows Environment

Customer Support

Use the Developer Community Forum to report bugs, request changes, and discuss with other API developers in the Carbon Black Community.

Requirements

• CB Defense or CB ThreatHunter
• Python 2.7 or Python 3 running on a 64-bit Intel platform
• pip
• Jinja2
• requests
• psutil

Test Requirements

• Flask
• Pytest

Installation

You can install the Syslog Connector using either PyPI or GitHub.

PyPI Installation

1. Run the following command in your terminal: pip install cbc-syslog

2. Navigate to the Python package location:

   Python {Version} MacOS: /python{version}/site-packages/cbc_syslog Windows: C:\Python{version}\Lib\site-packages\cbc_syslog Linux: /usr/lib/python{version}/site-packages/cbc_syslog

   Python 2.7 MacOS: /python2.7/site-packages/cbc_syslog Windows: C:\Python27\Lib\site-packages\cbc_syslog Linux: /usr/lib/python2.7/site-packages/cbc_syslog

3. Copy and paste the Configuration File example shown below into your own .conf file and modify it to your own specifications. Below is a table of all the configurable inputs that can be used in the syslog connector.

   Input	Required	Description
   template	Y	Template for syslog output.
   back_up_dir	Y	Location of the Backup Directory. This will be the location of backup files in the event that results fail to send to Syslog. The backup files are deleted upon a successful process.
   policy_action_severity	Y	This sets the default severity level for POLICY_ACTION notifications. By default it is 4.
   output_format	Y	Output format of the data sent. Currently support json, leef, and cef formats
   output_type	Y	Configures the specific output. Valid options are: 'udp', 'tcp', 'tcp+tls', 'http'
   tcpout	Y	Output Type: IP:port
   udp_out	Y	Output Type: IP:port
   http_out	Y	Output Type: http/https endpoint - ie https://server.company.com/endpoint
   http_headers	Y	Required if using http: {'key1': 'value1', 'key2': 'value2'}
   https_ssl_verify	Y	Required if using http: True or False
   requests_ca_cert	N	Override ca file for self signed certificates when using https
   ca_cert	N	Specifies a file containing PEM-encoded CA certificates for verifying the peer server when using TLS+TCP syslog
   cert	N	Specifies a file containing PEM-encoded client certificate for verifying this client when using TLS+TCP syslog
   key	N	Specifies a file containing PEM-encoded private key for verifying this client when using TLS+TCP syslog
   key_password	N	Specifies the password to decrypt the given private key when using TLS+TCP syslog
   tls_verify	N	True or False
   api_connector_id	Y	API Connector ID
   api_key	Y	API Key
   siem_connector_id	Y	SIEM Connector ID
   siem_api_key	Y	SIEM Key
   server_url	Y	Server URL

4. Create a .txt file for Logs.

5. Create an empty backup folder. The location of this folder will be placed in back_up_dir seen in the Configuration file. For more information on the behavior of the backup folder please see the description of back_up_dir in Step 3.

6. Test the new connector and run the following command:

   python cbc_syslog.py -l [LOG_FILE_LOCATION] -c [CONFIG_FILE_LOCATION]
   

   A successful run will look like:

   INFO:__main__:Carbon Black Cloud Syslog 2.0
   INFO:__main__:Number of files in store forward: 0
   INFO:__main__:Found 2 Carbon Black Cloud Servers in config file
   INFO:__main__:Handling notifications for https://defense-eap01.conferdeploy.net
   INFO:notifications:Attempting to connect to url: https://defense-eap01.conferdeploy.net
   INFO:notifications:<Response [200]>
   INFO:__main__:Sending Notifications
   INFO:__main__:Sending 3 messages to 00.00.000.00:000
   INFO:__main__:Done Sending Notifications
   INFO:__main__:Sending Audit Logs
   INFO:__main__:Sending 24 messages to 00.00.000.00:000
   INFO:__main__:Done Sending Audit Logs
   

Note: If you're having trouble installing on Centos 7 follow these instructions

• Verify python verison:

>$ python --version
Python 2.7.5

• Pip not found

>$ sudo yum install epel-release
>$ sudo yum -y install python-pip

• Python.h file not found with compile errors

>$ sudo yum install python-devel
>$ sudo pip install cbc-syslog

GitHub Installation

1. Pull down the Repo. You may use git clone or pull down the zip file directly from GitHub.

2. Navigate to the following location within the package /src/cbc_syslog

3. Follow Steps 3-6 in the PyPI installation instructions.

Using Docker

This assumes that docker is installed in your environments. See https://www.docker.com/ for more information

1. Build the docker container:

sudo docker build -f src/Dockerfile .

The last line will be "Successfully built ". Take note of the container id to connect to it.

2. Run the container interactively:  

sudo docker container run -it <containerId> /bin/bash

3. Within the container, configure syslog as per Steps 3-6 in the PyPI installation instructions.

Sample Config File

[general]

#
# Template for syslog output.
# This is a jinja 2 template
# NOTE: The source variable corresponds to the Carbon Black Cloud Server used to retrieve results
#
template = {{source}} {{version}}|{{vendor}}|{{product}}|{{dev_version}}|{{signature}}|{{name}}|{{severity}}|{{extension}}

#
#Location of the Backup Directory
#This will be the location of back up files in the event that results fail to send to Syslog
#

back_up_dir = /Users/jdoe/Documents/

#
# This sets the default severity level for POLICY_ACTION notifications.  By default it is 4.
#
# 0 - Emergency: System is unusable.
#
# 1 - Alert: Action must be taken immediately.
#
# 2 - Critical: Critical conditions.
#
# 3 - Error: Error conditions.
#
# 4 - Warning: Warning conditions.
#
# 5 - Notice: Normal but significant condition.
#
# 6 - Informational: Informational messages.
#
# 7 - Debug: Debug-level messages.
#
policy_action_severity = 4


#
# Output format of the data sent. Currently support json or cef formats
#
# Warning: if using json output_format, we recommend NOT using UDP output_type
#
output_format=cef

#
# Configure the specific output.
# Valid options are: 'udp', 'tcp', 'tcp+tls', 'http'
#
#  udp     - Have the events sent over a UDP socket
#  tcp     - Have the events sent over a TCP socket
#  tcp+tls - Have the events sent over a TLS+TCP socket
#  http    - Have the events sent over a HTTP connection
#
output_type=tcp

#
# tcpout=IP:port - ie 1.2.3.5:514
#
tcp_out=

#
# udpout=IP:port - ie 1.2.3.5:514
#
udp_out=

#
# httpout=http/https endpoint - ie https://server.company.com/endpoint
# http_headers= {'key1': 'value1', 'key2': 'value2'} - ie {'content-type': 'application/json'}
# https_ssl_verify = True or False
#
http_out=
http_headers= {'content-type': 'application/json'}
https_ssl_verify=True

#
# Override ca file for self signed certificates when using https
# This is typically a .pem file
#
#requests_ca_cert=/usr/share/cb/integrations/cbc-syslog/cert.pem

[tls]

#
# Specify a file containing PEM-encoded CA certificates for verifying the peer server when using TLS+TCP syslog
#
#ca_cert = /etc/cb/integrations/cbc-syslog/ca.pem

#
# Optionally specify a file containing PEM-encoded client certificate for verifying this client when using TLS+TCP syslog
# If cert is specified, key is a required parameter
#
#cert = /etc/cb/integrations/cbc-syslog/cert.pem

#
# Optionally specify a file containing PEM-encoded private key for verifying this client when using TLS+TCP syslog
# If key is specified, cert is a required parameter
#
#key = /etc/cb/integrations/cbc-syslog/cert.key

#
# Optionally specify the password to decrypt the given private key when using TLS+TCP syslog
#
#key_password = p@ssw0rd1

#
# Uncomment tls_verify and set to "false" in order to disable verification of the peer server certificate
#
#tls_verify = true

[CarbonBlackCloudServer1]

#
# Carbon Black Cloud API Connector ID
#
api_connector_id = GO5M953111

#
# Carbon Black Cloud API Key
#
api_key = BYCRM7BRNSH0CXZR5V1Y3111

#
# Carbon Black Cloud SIEM Connector ID
#
siem_connector_id = UEUWR4U111

#
# Carbon Black Cloud SIEM Key
#
siem_api_key = XNS5UKWZXZMCC3CYC7DFM111

#
# Carbon Black Cloud Server URL
# NOTE: this is not the url to the web ui, but to the API URL (for example, https://api-prod05.conferdeploy.net)
#
server_url = https://server1.yourcompany.com

#
# For more than one Carbon Black Cloud Server, add another server using the following template including the stanza
#
#[CarbonBlackCloudServer2]
#api_connector_id = KJARWBZ111
#api_key = CQF35EIH2WDF69PTWKGC4111
#server_url = https://server2.yourcompany.com