Skip to main content

Ceph AIops

Disclaimer: Community-maintained open-source project. Not affiliated with, endorsed by, or sponsored by the Ceph project or any storage vendor. Product and trademark names belong to their owners. MIT licensed.

Governed AI-ops for Ceph — talks to a vanilla ceph-mgr Dashboard REST API (HTTPS :8443, username + password exchanged for a short-lived JWT at POST /api/auth) with a built-in governance harness: unified audit log, token/runaway budget guard, undo-token recording, and descriptive risk tiers. Works against stock ceph-mgr — cephadm, hypervisor-bundled Ceph, or MicroCeph — with no croit and no Kubernetes dependency. Self-contained: no external skill-family dependency.

What it does

The flagship analysis, plus the guarded reads and writes around it:

  • cluster_health — HEALTH_WARN/ERR root-cause analysis. Instead of echoing raw check codes (PG_DEGRADED, OSD_NEARFULL, SLOW_OPS, MON_DOWN, LARGE_OMAP_OBJECTS, …), it turns each active check into plain language: what it means, the likely cause, and the suggested next action. This is the differentiator vs the hobby Ceph MCPs that just proxy ceph -s.
  • Governed destructive ops. The operations operators actually fear — osd_purge, pool_delete, set_pool_size, rbd_image_delete — carry dry-run + double-confirm and a high risk tier; reversible tuning (osd_reweight, throttle_recovery, cluster_flag_set, pool quota/pg_num/ autoscale) records an undo descriptor capturing the prior state.

What this tool does, and does not, decide

It delivers Ceph operations — reads and writes — accurately and efficiently, and records every one of them. It does not decide whether a write is allowed to happen. That is the agent's judgement, or the permission of the account you connect it with: give it a ceph-mgr Dashboard account with a read-only role and the writes fail at the mgr — the place that actually owns the permission.

So there is no read-only switch, no policy file, no approval gate to configure. The one thing the tool guarantees is that nothing is silent: every call, over MCP and over the CLI alike, lands an audit row in ~/.ceph-aiops/audit.db, and destructive writes still capture their before-state and record an inverse where one exists.

Each tool declares a risk_level, kept in agreement with its [READ]/[WRITE] documentation tag by a test, and carried into the audit row as a descriptive tier — so a reviewer can see at a glance that a row was a high-risk delete. It is a label, not a gate.

What works

  • CLI (ceph-aiops ...): init, overview, health detail/health status, osd tree/df/reweight/out/purge, secret set/list/rm/migrate/rotate-password, doctor, mcp. osd out and osd purge require --dry-run + double confirm.
  • MCP server (ceph-aiops mcp or ceph-aiops-mcp): the full 37 tools (17 read, 18 write, 2 undo), every one wrapped with the bundled @governed_tool harness. The CLI is a convenience subset; the MCP surface is the whole tool.
  • Encrypted credentials: the Dashboard password lives in an encrypted store ~/.ceph-aiops/secrets.enc (Fernet + scrypt) — never plaintext on disk. Unlock with a master password from CEPH_AIOPS_MASTER_PASSWORD (MCP/CI) or an interactive prompt (CLI).
  • Reversibility: reversible writes capture the prior state and record an inverse undo descriptor (e.g. osd_reweight → prior weight, set_pool_quota → prior quota, throttle_recovery → prior backfill/recovery settings).
  • Safety: destructive ops (osd_purge, osd_mark_out, pool_delete, set_pool_size, rbd_image_delete, rbd_snapshot_delete) are high risk with dry_run and CLI double confirmation.

Capability matrix (37 MCP tools)

Group Tools Count R/W
Health cluster_health (flagship RCA), cluster_status 2 read
OSD osd_tree, osd_df, osd_perf 3 read
cluster_flag_set (low, undo), osd_reweight (med, undo), osd_mark_in (med, undo) 3 write
osd_mark_out (high, dry-run), osd_purge (high, dry-run) 2 write
PG pg_summary, pg_dump_stuck, scrub_status 3 read
trigger_scrub (low), trigger_deep_scrub (low) 2 write
Pool pool_ls, pool_df 2 read
set_pool_quota (med, undo), set_pool_pg_num (med, undo), set_pool_autoscale (med, undo), pool_create (med) 4 write
set_pool_size (high, dry-run), pool_delete (high, dry-run) 2 write
RBD rbd_ls 1 read
rbd_image_create (med), rbd_snapshot_create (low) 2 write
rbd_image_delete (high, dry-run), rbd_snapshot_delete (high, dry-run) 2 write
CephFS / RGW cephfs_status, rgw_status 2 read
Cluster-ops mon_status, mgr_status, slow_ops, capacity_forecast 4 read
throttle_recovery (med, undo) 1 write
Undo undo_list, undo_apply 2 undo

Totals: 37 tools — 17 read, 18 write, 2 undo.

Quick start

uv tool install ceph-aiops          # or: pipx install ceph-aiops
ceph-aiops init                     # wizard: add a mgr target + store the Dashboard password (encrypted)
ceph-aiops doctor                   # JWT login + mgr-dashboard reachability
ceph-aiops overview                 # HEALTH status + active checks + OSD up/in
ceph-aiops health detail            # decode the active HEALTH_WARN/ERR checks (RCA)
ceph-aiops osd df                   # per-OSD utilization, most-full first, near/backfill-full flags

Run as an MCP server (stdio):

export CEPH_AIOPS_MASTER_PASSWORD=...   # unlock secrets non-interactively
ceph-aiops-mcp

Governance

Every operation — MCP and CLI — passes through the bundled @governed_tool harness. It records; it does not authorize (see above).

  • Audit — every call (params, result, status, duration, risk tier, and any operator-supplied approver/rationale) is logged to ~/.ceph-aiops/audit.db (relocatable via CEPH_AIOPS_HOME). The CLI writes the same row the MCP path does — there is no unaudited entry point.
  • Runaway guard — a safety backstop, not an authorization gate: the same call hammered in a tight loop trips a circuit breaker so a stuck agent can't burn unbounded calls/time. Disable with CEPH_RUNAWAY_MAX=0; optional hard ceilings via CEPH_MAX_TOOL_CALLS / CEPH_MAX_TOOL_SECONDS.
  • Undo recording — reversible writes record an inverse descriptor built from the fetched before-state.
  • Risk tier — a descriptive label on the audit row derived from risk_level; it gates nothing.

Supported scope & limitations

  • Deployments: vanilla ceph-mgr with the dashboard module enabled — cephadm, hypervisor-bundled Ceph, or MicroCeph. No croit, no Kubernetes dependency.
  • Ceph has no ETag / pagination on the Dashboard API, so this tool exposes none — nothing is missing, the upstream API simply doesn't offer them.
  • Validation status: behaviour is exercised against mocked Dashboard responses by the test suite; multi-node rebalance and the write ops have not been run against a live cluster. The cheapest live check is a single-node MicroCeph (snap install microceph → bootstrap → loop-file OSDs) running ceph-aiops doctor; a 3-node Vagrant cluster exercises real rebalance behaviour. See docs/VERIFICATION.md for the full live-verification checklist.

Missing a capability?

RGW multisite, per-daemon config sprawl, NFS-Ganesha exports, orchestrator (cephadm) host management — not here yet. Open an issue or send a PR — feedback and contributions are welcome.

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

ceph_aiops-0.8.0.tar.gz (205.4 kB view details)

Uploaded Source

Built Distribution

If you're not sure about the file name format, learn more about wheel file names.

ceph_aiops-0.8.0-py3-none-any.whl (97.2 kB view details)

Uploaded Python 3

File details

Details for the file ceph_aiops-0.8.0.tar.gz.

File metadata

  • Download URL: ceph_aiops-0.8.0.tar.gz
  • Upload date:
  • Size: 205.4 kB
  • Tags: Source
  • Uploaded using Trusted Publishing? Yes
  • Uploaded via: twine/7.0.0 CPython/3.13.14

File hashes

Hashes for ceph_aiops-0.8.0.tar.gz
Algorithm Hash digest
SHA256 2405217bd78dac8f57619857b5d702e466a542f5da01875835dbf6d048187089
MD5 79eaebf213034a4effc1cd35f8c23e84
BLAKE2b-256 43bfabd2014fb565fd33cefe777f12f3b5df20c06b1f1aa80cc81cb7f6046bc3

See more details on using hashes here.

Provenance

The following attestation bundles were made for ceph_aiops-0.8.0.tar.gz:

Publisher: publish.yml on AIops-tools/Ceph-AIops

Attestations: Values shown here reflect the state when the release was signed and may no longer be current.

File details

Details for the file ceph_aiops-0.8.0-py3-none-any.whl.

File metadata

  • Download URL: ceph_aiops-0.8.0-py3-none-any.whl
  • Upload date:
  • Size: 97.2 kB
  • Tags: Python 3
  • Uploaded using Trusted Publishing? Yes
  • Uploaded via: twine/7.0.0 CPython/3.13.14

File hashes

Hashes for ceph_aiops-0.8.0-py3-none-any.whl
Algorithm Hash digest
SHA256 ca156b244a91d283c3daef1831560a0041ad021981b53d51afd8e0842d843733
MD5 2ad51f52e551a4a9dcd899f3147b0611
BLAKE2b-256 e4c6fed9baee209fd0df3bafb3bdea87ddbe79f5bf08e51f7566ddf69ce09024

See more details on using hashes here.

Provenance

The following attestation bundles were made for ceph_aiops-0.8.0-py3-none-any.whl:

Publisher: publish.yml on AIops-tools/Ceph-AIops

Attestations: Values shown here reflect the state when the release was signed and may no longer be current.

Release history Release notifications | RSS feed

0.10.0

2 files

0.9.0

2 files

This release

0.8.0 This release

2 files

0.7.0

2 files

0.6.0

2 files

0.5.0

2 files

0.4.1

2 files

0.4.0

2 files

0.3.0

2 files

0.2.1

2 files

0.2.0

2 files

0.1.1

2 files

0.1.0

2 files

Anthropic, PBC Visionary sponsor Bloomberg Visionary sponsor Hudson River Trading Visionary sponsor Meta Visionary sponsor NVIDIA Visionary sponsor Microsoft Sustainability sponsor Depot Continuous Integration AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Sentry Error logging StatusPage Status page