Clew

Find where your coding agent wastes work — which file, which turn, why.

pip install "clew-custos[detect]"   # published as clew-custos, not clew
python -m clew analyze ~/.claude/projects/<slug>/<uuid>.jsonl --out report.md

Package name is clew-custos (the bare name clew on PyPI is an unrelated placeholder). The module still imports as clew.

Real excerpt from a public Claude Code session (09d9abe9, 258 turns; local path abbreviated, numbers unchanged):

Result: WASTE DETECTED

### 1. requery — Read on `.../boot.ts`
- turns: turn 50 → re-run at turn 58 (of 258 total)
- state: No modification of this file in between — re-read output is unchanged.
- re-consumed across 200 subsequent turns (≈439 tokens/turn → 87800 amplification tokens)
- estimated cost impact: $0.026340 ~ $0.263400 (cache-hit to cache-miss)

Deterministic, no LLM in the loop. Every span in the session was 200 OK; the trace stayed green. Clew reads the finished session and points at the redundant step.

---

Why diagnosis (and not another dashboard)

Observability tools (Langfuse, Phoenix, LangSmith) show you the trace. Clew tells you which spans are waste, and why — the exact file, the turns, whether the file was modified in between.

Clew diagnoses; it does not fix. The output is a report you read. What to change in your agent — prompt, context caching, tool routing — is a call only you can make.

Scope is deliberately narrow: one working pattern (repeat / requery), done precisely. A second pattern for reasoning-level ping-pong (pingpong) is implemented but has not fired on any trace format we've validated (tool-span only) — we don't advertise what we haven't observed.

---

How it works

A two-stage cascade, fully deterministic:

1. Structural gate — group steps by (node, normalized input); a group with ≥ 2 occurrences is a candidate.
2. Identity gate — require sha256(output_A) == sha256(output_B). If outputs differ (state changed, a retry succeeded where one failed), it is not flagged.

Frozen parameters (never hand-tuned): phi = 0.514345, N = 2, embedding model paraphrase-multilingual-MiniLM-L12-v2, pinned to a git tag with a manifest sha256. N = 2 began as an arbitrary default; we later verified it is F1-optimal across N ∈ {2, 3, 5, ∞} on RedundancyBench (F1 decreases monotonically as N grows).

A report entry also carries a per-file state check — "no modification in between" vs "File was modified in between — may be a legitimate re-read" — so you can tell forced re-reads (waste) from legitimate ones. Tool-error responses (is_error: true in Anthropic tool_result) are excluded from waste with an explicit count in the report.

---

Where it stands

RedundancyBench — labeled ground truth

Human-labeled benchmark for redundant-step detection (arXiv:2605.29893):

	Clew (deterministic)	Best method in the paper (LLM-as-judge)
Step-level F1	0.2642	0.2488
Precision	0.826	—

Same evaluate.py (imported directly from their repo), same scope (all four redundancy categories). Clew surpasses the paper's best reported method without a single model call.

Read this honestly — three caveats:

1. 0.2488 is the paper's reported number, not something we re-ran. The repo ships the scorer we import, but not the baseline's prediction files, so we can't reproduce 24.88% in our environment. The scorer is identical; the comparison point is cited, not reproduced.
2. This is one benchmark. A 0.0154 F1 margin on a single dataset is a signal, not a verdict. Recall is low (0.157) — Clew catches the one kind of waste it's built for and deliberately ignores the rest.
3. Precision 0.826 may be a lower bound. Of the 22 false-positive spans, 21 were exact input-and-output repeats that no annotator labeled under any category, and 6 had zero state change in between — i.e. redundancies the annotators appear to have missed. Owner review pending; we don't claim all 22 are waste.

trace-commons — 28 real public Claude Code sessions

Public dataset (trace-commons/agent-traces), full scan on 2026-07-19:

• 28 / 28 sessions processed, 0 crashes.
• 10 / 28 flagged as wasteful (34 waste spans in the cascade output; 32 kept after the tool-error gate).
• Aggregate saving potential (across all wasteful sessions): $1.01 ~ $10.12 (cache-hit lower to cache-miss upper).
• Per-session range: $0 (no waste) up to $0.64 ~ $6.40 (one session, 18 waste spans).

Honest scope: trace-commons has no step-level ground truth — the 34 spans are cascade-flagged candidates plus a state-change check per file, not annotator-verified waste. Precision lives on RedundancyBench; scale on real data lives here.

Toolathlon — 7,116 trajectories, cross-model scale

Beyond labeled and real-user data, Clew ran unmodified over Toolathlon — 22 frontier models × 3 runs (arXiv:2510.25726, CC-BY-4.0):

• 8,042 waste candidates flagged across 176,270 tool spans, in 32 seconds.
• Candidate density varies 54× across models (0.157 – 8.463 per trajectory).

Honest scope: Toolathlon ships only pass/fail labels, not step-level ground truth. These are candidates, not verified waste — "model X wastes 54× more than model Y" would over-claim (no labels; task-mix and success-rate confounds uncontrolled).

---

Cost estimation

Every wasted step in a Claude Code trace has a knock-on cost: the stale tool result stays in the trajectory and is re-consumed as input on every subsequent turn. Naive single-consumption math makes waste look trivial (~$0.001); the real number is the wasted output times the remaining turns.

Formula per waste span:

amp_tokens_i  = waste_tokens_i × turns_after_i
lower_i (USD) = amp_tokens_i × cache_read_price  (fully cached re-consumption)
upper_i (USD) = amp_tokens_i × base_input_price  (uncached re-consumption)

Where waste_tokens_i comes directly from the vendor's cache_creation_input_tokens field on the assistant turn immediately after the waste, and turns_after_i is the number of assistant turns from the waste to the end of the session. Retry cascades where prev.cache == next.cache are filtered out with an explicit count.

Read the estimate honestly:

• It is estimated saving potential, not measured cost. The formula assumes the wasted output is re-consumed each subsequent turn (a structural upper bound).
• The range spans cache-hit (lower) to cache-miss (upper); the exact split is not observable from Anthropic usage.
• Claude Code sessions only. Other adapters (OTel, OpenInference, Toolathlon) still detect waste, but do not populate the cache-token fields the amplification calculator needs. Those reports show waste-detected without a dollar figure.
• Attribution assumes Sonnet 4.5 pricing.

---

Reads your existing traces

Clew is a complement, not a replacement. It doesn't store or visualize traces — it reads what your observability stack already produces and points at the waste. It also runs standalone on raw session logs.

Auto-detected input formats:

Source	Detected by
Claude Code session logs (.jsonl)	sessionId
OpenTelemetry SDK JSON	context
OpenInference (Phoenix / TRAIL lineage)	span_id / nested child_spans
Clew native trace JSON	trace_id + spans
Toolathlon trajectories	modelname_run + task_status
RedundancyBench	tasks + simulations

Because it ingests OpenTelemetry and OpenInference, it can read traces from Langfuse, Arize Phoenix, and any OTel-instrumented agent. (OTLP protobuf-JSON is not yet supported; the error message points you to the SDK-JSON conversion.)

---

How we keep ourselves honest

This repo treats anti-self-deception as a working discipline, not a slogan:

• Pre-registration. Every detection change is committed before results are run, so the prediction carries an external timestamp. Predictions and stop-conditions are written first and not edited after seeing results.
• Frozen parameters. phi, N, and the embedding model are pinned to a git tag; changing them requires a documented recalibration, never a post-hoc nudge.
• Published corrections. When a small-sample number didn't survive a larger sample, we retracted it in the open. (An early "failed traces waste 2.6× more" held on 108 traces but collapsed across 7,116 — retracted. 18 of 22 models still show higher waste on failed traces, but no single multiplier holds.)
• Fixes driven by real data. The trace-commons scan surfaced two adapter issues that no synthetic test caught: session mid-run abort (3/28 crashes → recovered with skip + warn) and Anthropic is_error: true tool_result being sha256-identical (2 false-positives across 269 error responses → gated at the report layer, cascade unchanged). Both are recorded in docs/CC_TRANSCRIPT.md §29.
• Disclosed limits. The semantic embedding layer does not cleanly separate same-topic real-world outputs — the sha256 structural gate carries the precision result, not the embedding. We say so rather than imply the model is doing the work.

239 tests, CI on every PR, frozen parameters enforced as failing tests.

---

Install

Note: the bare name clew on PyPI is an unrelated placeholder — don't install that. This project is published as clew-custos (the module still imports as clew).

pip install "clew-custos[detect]"

Or from source:

pip install "clew-custos[detect] @ git+https://github.com/JEONSEWON/Clew-by-Custos.git"

Requires Python ≥ 3.12.

Use

python -m clew analyze path/to/trace.jsonl --out report.md

• Input: any auto-detected format from the table above.
• --out writes Markdown; --json writes structured output; --no-snippets omits output excerpts.
• Exit 0 whether or not waste is found; 1 on missing file / schema error / missing detect dependencies.

For your own Claude Code sessions, transcripts live at ~/.claude/projects/<slug>/<uuid>.jsonl.

---

License

MIT. Built under Custos.

External datasets referenced here (Toolathlon CC-BY-4.0, RedundancyBench MIT, trace-commons per its HF card) are analyzed locally and never redistributed in this repo.