cloudsense 0.1.5

A CLI and interactive GUI for AWS cost tracking.

CloudSense

A CLI and interactive GUI for AWS cost tracking.

Features

• AWS cost tracking using Cost Explorer API with authentication
• Complete cost visibility - entire account and per-service usage analysis
• Intelligent caching - persistent file-based caching with 1 hour duration (customizable) to minimize API costs
• Flexible time ranges - 7, 14, 30, 90 days, current month, previous month, custom month, specific day
• Interactive visualizations - daily cost trends with dynamic charts
• Detailed breakdowns - service-by-service cost analysis
• Performance optimized - AWS session caching and efficient API usage
• Enterprise features - rate limiting, input validation, security headers
• Health monitoring - built-in health check endpoint for monitoring
• Logging levels and debug mode - structured logging with configurable levels

Caching cost data to reduce cost

AWS Cost Explorer API calls are $.01 for each call.

Cache Behavior

• CloudSense caches cost data for 1 hour (default, configurable) to reduce AWS API costs
• Persistent file-based caching stored in ~/.cloudsense-cache/
• Cross-session persistence - cache survives CLI restarts
• Cache status displayed in CLI and web interface with last update timestamp
• Click "Update Cost Data" button or use --force-refresh to bypass cache
• CLI and GUI use the same caching system and share cached data
• Second call to same data (within cache timeout) uses cache instead of AWS API

Practical Impact:

# With persistent cache (by default 1 hour)
cloudsense --days 7           # API cost ($0.01)
cloudsense --days 7           # Same parameters, will uses cache with no API call (free)

Cost Optimization Tips - Avoid Cost Explorer API calls when you can

• Use same time range for multiple queries to benefit from caching
• GUI sessions cache multiple API calls (regions, services, breakdowns)
• CLI repeated calls with same parameters use cache within 1 hour
• Configure longer cache duration with --cache-duration 7200 (2 hours)
• Use --force-refresh only when you need guaranteed fresh data

Installation

Recommended: Use a virtual environment

# Create virtual environment
python -m venv cloudsense-env

# Activate virtual environment
source cloudsense-env/bin/activate

1. Install CloudSense:

   pip install cloudsense
   

2. Configure AWS credentials (Required):

   aws configure
   # or set environment variables:
   export AWS_ACCESS_KEY_ID=<your-key>
   export AWS_SECRET_ACCESS_KEY=<your-secret>
   export AWS_DEFAULT_REGION=us-east-1
   

   Authentication Required: CloudSense requires valid AWS credentials to access cost data.

   API Region: CloudSense always uses us-east-1 for AWS Cost Explorer API calls (hardcoded, AWS requirement). Your AWS_DEFAULT_REGION setting does not affect the Cost Explorer API endpoint.

3. Run CloudSense (CLI):

   cloudsense
   

   Example CLI Output:

   $ cloudsense --hide-acct
   ======================================================================
   CloudSense - AWS Cost Report (30 days)
   ======================================================================
   Account: ***HIDDEN***
   Date Range: 2025-07-21 to 2025-08-20
   Region: All Regions
   Services: 16
   Data Status: CACHED at 2025-08-20 12:22
   ----------------------------------------------------------------------
   Service Breakdown:
   ----------------------------------------------------------------------
    1. Amazon Registrar                                $   88.00   ( 31.6%)
    2. EC2 - Other                                     $   66.23   ( 23.7%)
       ├── EBS gp3 Storage                                 ├──  10.03
       ├── EBS io2 IOPS                                    ├──   4.25
       ├── EBS Snapshots                                   ├──   3.23
       ├── EBS io1 IOPS                                    ├──   1.18
       ├── EBS io1 Storage                                 ├──   0.91
       ├── EBS io2 Storage                                 ├──   0.35
       ├── NAT Gateway                                     ├──  46.15
       ├── Spot Instances                                  ├──   0.18
       └── Data Transfer                                   └──   0.13
    3. EC2 - Compute                                   $   53.97   ( 19.4%)
    4. AWS Cost Explorer                               $   20.41   (  7.3%)
    5. Amazon Q                                        $   18.57   (  6.7%)
    6. Amazon S3                                       $    9.87   (  3.5%)
    7. Amazon FSx                                      $    8.15   (  2.9%)
    8. VPC                                             $    5.65   (  2.0%)
    9. Bedrock: SD 3.5 Large                           $    5.12   (  1.8%)
   10. Route53                                         $    2.54   (  0.9%)
   11. Amazon EFS                                      $    0.21   (  0.1%)
   12. Bedrock: Claude Opus 4                          $    0.11   (  0.0%)
   13. Bedrock: Claude Sonnet 4                        $    0.04   (  0.0%)
   14. AWS Backup                                      $    0.02   (  0.0%)
   15. CloudWatch                                      $    0.00   (  0.0%)
   16. DynamoDB                                        $    0.00   (  0.0%)
   ======================================================================
   TOTAL COST: $  278.88
   ======================================================================
   

4. Launch Web Interface:

   cloudsense --gui
   

   Then open http://localhost:8080 in your browser

   Security Note: By default, CloudSense binds to 127.0.0.1 (localhost only) for security.

   GUI Startup Output

   Starting CloudSense on http://127.0.0.1:8080
   Configuration: default
   AWS Region: us-east-1
   Cache Duration: 3600s
   Log Level: INFO
   
   Press Ctrl+C to stop the server
   --------------------------------------------------
    * Serving Flask app 'cloudsense.app'
    * Debug mode: off
    * Running on http://127.0.0.1:8080
   

   

Command Line Usage

Text Output (Default)

cloudsense                          # 30-day cost report (all regions by default)
cloudsense --days 7                 # 7-day cost report  
cloudsense --days 90                # 90-day cost report
cloudsense --hide-acct              # Hide AWS account number
cloudsense --force-refresh          # Force cache refresh
cloudsense --aws-region us-west-2   # Show costs for us-west-2 region only
cloudsense --aws-region global      # Show global services only (IAM, Route53, etc.)

Web Interface

cloudsense --gui                    # Launch web interface
cloudsense --gui --hide-acct        # Launch web interface with hidden account
cloudsense --gui --port 5000        # Web interface on custom port
cloudsense --gui --host 0.0.0.0     # Web interface on all interfaces (security risk)
cloudsense --gui --debug            # Web interface with debug mode

Environment Configuration

# Copy environment template and customize
cp .env.example .env

# Available environment variables:
export AWS_REGION=us-east-1
export LOG_LEVEL=INFO
export CACHE_DURATION=3600
export RATELIMIT_DEFAULT="100 per hour"
export HIDE_ACCOUNT=false

CloudSense includes a built-in health check endpoint for monitoring and load balancer integration:

# Health check endpoint
curl http://localhost:8080/health

# Example response:
{
  "status": "healthy",
  "aws": "connected", 
  "timestamp": "2024-01-15T10:30:00Z",
  "version": "0.1.1"
}

Rate Limiting & Security

CloudSense implements comprehensive security measures:

• Rate Limiting: API endpoints are protected with configurable rate limits
  • /api/billing: 30 requests per minute
  • /api/service/*: 60 requests per minute
  • /api/regions: 10 requests per minute
• Input Validation: All parameters are validated and sanitized
• Security Headers: Protection against XSS, clickjacking, and content sniffing
• Error Handling: Structured error responses without sensitive information leakage
• Logging: Comprehensive request and error logging for security monitoring

AWS Permissions Required

Your AWS credentials need the following permissions:

API Endpoint: CloudSense hardcodes the us-east-1 endpoint for AWS Cost Explorer API calls, as required by AWS. This is completely independent of your region filtering - you can still filter costs by any AWS region.

{
    "Version": "2012-10-17",
    "Statement": [
        {
            "Effect": "Allow",
            "Action": [
                "ce:GetCostAndUsage",
                "ce:GetUsageReport",
                "sts:GetCallerIdentity"
            ],
            "Resource": "*"
        }
    ]
}

Note: sts:GetCallerIdentity is required for authentication validation and account ID display.

Configuration Options

Create a .env file for local development:

# AWS Configuration
AWS_REGION=us-east-1
AWS_PROFILE=default

# Application Configuration  
FLASK_DEBUG=true
LOG_LEVEL=DEBUG
CACHE_DURATION=3600

# Security Configuration
RATELIMIT_DEFAULT=1000 per hour  # More lenient for development
HIDE_ACCOUNT=false

# Server Configuration
HOST=127.0.0.1
PORT=8080

Logging

View detailed logs:

cloudsense --log-level DEBUG  # Enable debug logging
tail -f cloudsense.log        # Monitor log file

License

MIT License - see LICENSE file for details.