Collapsarr

Never get stuck without a downmix again.

Collapsarr is a companion application for Sonarr and Radarr. It watches your library for media missing a lower-channel-count audio track — a 7.1 release with no stereo fallback, a 5.1 file your soundbar can't decode — and adds one automatically via FFmpeg, without touching the track that's already there.

Why

• No upmixing, ever. Collapsarr only adds tracks the source can actually support (a stereo/2.1/5.1 downmix from a higher channel count) — it will never fake a 5.1 track out of a stereo source.
• Originals are never at risk. The remux writes to a temp file, validates duration and stream count, then atomically swaps it in. Any failure at any stage leaves the original file completely untouched — no partial writes, no orphaned backups.
• Fits into the *arr stack you already run. Sonarr/Radarr integration (webhooks + periodic scan), a dark UI in the same style as the rest of the family, and a REST API following the same conventions.

Features

• Sonarr and Radarr integration — instance config, connectivity check, remote path mapping, multiple concurrent instances
• Per-target, per-language detection that stacks additional targets without duplicating what's already there
• FFmpeg remux: stream-copies existing tracks, encodes new audio (AAC for Stereo, AC3 @ 448kbps for 2.1/5.1)
• Job queue with configurable concurrency — triggered by webhook, periodic full-library scan, on-demand scan, or manual per-file trigger
• Full job history: status, timestamps, FFmpeg exit code, error text
• Web UI in the same dark theme as Sonarr/Radarr/Bazarr — Wanted view, Activity/History, per-file detail view with a manual trigger
• Webhook + Discord notifications on job failure or app health issues (e.g. FFmpeg missing)
• REST API with *arr-convention auth (API key)

Quick start

Docker (recommended):

services:
  collapsarr:
    image: odxnsson/collapsarr:latest
    container_name: collapsarr
    ports:
      - "8282:8282"
    volumes:
      - ./config:/config
      - /path/to/media:/media
    environment:
      - PUID=1000
      - PGID=1000
    restart: unless-stopped

Then open http://localhost:8282 — you'll land on a one-time credential setup page (see Authentication for how login is enforced, including the caveat if you're putting Collapsarr behind a reverse proxy). restart: unless-stopped above means the container comes back automatically whenever it stops unexpectedly or the Docker daemon restarts (e.g. after a host reboot) — see Running on startup if you need it to survive a reboot on a bare-metal/PyPI install instead.

PyPI (bare-metal):

pipx install collapsarr
collapsarr

No flags, no config file needed — Collapsarr stores its SQLite database under your platform's standard per-user data directory by default (e.g. ~/.local/share/collapsarr/collapsarr.db on Linux; native per-OS locations on macOS/Windows), creating it automatically if it doesn't exist. Set COLLAPSARR_DATA_DIR if you'd rather it live somewhere else — see Configuration. Requires FFmpeg on PATH — see Requirements below. Open http://localhost:8282; see Configuration for the full list of environment variables, and Running on startup for a systemd unit.

Requirements

• Python 3.12+

• FFmpeg — external system dependency, checked at startup and reported on the health page if missing. Bundled in the Docker image; install it yourself for a bare-metal/PyPI setup:

  OS	Command
  Debian / Ubuntu	sudo apt install ffmpeg
  Fedora	sudo dnf install ffmpeg
  Arch	sudo pacman -S ffmpeg
  macOS (Homebrew)	brew install ffmpeg
  Windows (winget)	winget install ffmpeg

  Verify with ffmpeg -version. Official builds/source: ffmpeg.org/download.html.

Authentication

Collapsarr requires a one-time credential setup (/setup, first run) and, after that, logging in (/login) before the UI/API is usable — except from a caller Collapsarr considers "local". The Login requirement setting (Settings → General, auth_required in the API) controls this:

Reverse-proxy limitation: local-address classification looks only at the direct TCP connection Collapsarr accepted — never an X-Forwarded-For (or similar) header, since that's supplied by the client and trivially spoofable. If Collapsarr sits behind a reverse proxy (nginx, Traefik, Cloudflare Tunnel, etc.), every request's direct peer is the proxy itself, which usually is local — meaning every client, including ones out on the internet, would be classified as local and skip authentication entirely. If you run Collapsarr behind a reverse proxy, set the Login requirement to "Always required" (auth_required=enabled) until a future release adds trusted-proxy support (a stubbed-out capability today).

Headless deploys — seeding a credential without the setup page: a declarative/automated deploy (Docker Compose, Ansible, etc.) has no human available to click through /setup. Set COLLAPSARR_AUTH_USERNAME and COLLAPSARR_AUTH_PASSWORD (together — see Configuration) and a fresh install seeds that credential on first boot instead — hashed before it's persisted, never stored or logged in plaintext — and comes up already past the setup gate. COLLAPSARR_AUTH_METHOD and COLLAPSARR_AUTH_REQUIRED are honoured at the same time if set, otherwise the seeded credential gets the same defaults /setup would (forms, local_bypass).

This doubles as the supported password-recovery/lockout escape hatch, but only for a fresh or already-locked-out install with no credential configured yet — seeding runs once and never overwrites a credential that already exists, even if the environment variables are still set on a later boot. It does not help recover a forgotten password once a credential is already set; that requires clearing the existing auth_username/ auth_password_hash first (e.g. directly in the database) so the instance has no credential again, at which point re-seeding (or /setup) applies.

Development

python -m venv .venv
source .venv/bin/activate
pip install -e ".[dev]"

# Run the checks
pytest
ruff check .
mypy

# Run the server (defaults to http://0.0.0.0:8282)
python -m collapsarr
# then: curl http://localhost:8282/health
#   ->  {"status":"ok","version":"...","warnings":[]}
#   (or, if FFmpeg is missing: {"status":"degraded","version":"...",
#    "warnings":[{"code":"ffmpeg_missing","message":"..."}]})

Configuration

All settings load from environment variables (prefixed COLLAPSARR_) with sensible defaults, and an optional .env file is read from the working directory. See .env.example.

Running on startup

Docker: the restart: unless-stopped line in the Quick start compose file already handles this — Docker restarts the container whenever it stops unexpectedly or the Docker daemon itself restarts. On Linux this happens automatically on boot, since dockerd runs as a systemd service enabled by default (systemctl is-enabled docker to confirm). On Docker Desktop (macOS/Windows), enable Settings → General → Start Docker Desktop when you log in so the daemon — and in turn the container — comes up after a reboot.

Bare-metal / PyPI install: run Collapsarr as a systemd service so it starts on boot and restarts if it crashes. Create /etc/systemd/system/collapsarr.service:

[Unit]
Description=Collapsarr
After=network.target

[Service]
Type=simple
User=collapsarr
Group=collapsarr
WorkingDirectory=/opt/collapsarr
EnvironmentFile=/opt/collapsarr/.env
ExecStart=/opt/collapsarr/.venv/bin/collapsarr
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target

Adjust User/Group, WorkingDirectory, and the .venv path to match where you installed it; EnvironmentFile should point at an .env containing the COLLAPSARR_* variables from Configuration (see .env.example). Then enable and start it:

sudo systemctl daemon-reload
sudo systemctl enable --now collapsarr

Check status/logs with systemctl status collapsarr and journalctl -u collapsarr -f.

Docs

Fuller docs live on the GitHub Wiki.

License

GPLv3.