compress

Compress any file below a target size. One command, two arguments.

compress "D:\Videos\movie.mp4" 50

Make this file smaller than 50 MB.

That is the whole interface. You never specify a codec, a CRF, a bitrate, a quality number or a resolution — the package works those out, encodes, measures the real file on disk, and tries again until it fits.

Compressing:
D:\Videos\movie.mp4

Original size: 82.4 MB
Target size:   50 MB

Detecting media type...
Video detected (1920x1080, 124.0s, 30 fps).

Optimizing...
  Attempt 1: 61.2 MB [3.85 Mbps]
  Attempt 2: 47.9 MB [2.98 Mbps]  <- best so far
  Attempt 3: 48.9 MB [3.06 Mbps]  <- best so far

Compression successful.

Original:    82.4 MB
Compressed:  48.9 MB
Saved:       33.5 MB
Reduction:   40.7%

Output:
D:\Videos\movie_compressed.mp4

Install

pip install compress-cli

That is the whole install. FFmpeg comes with it — you do not install anything separately, and nothing needs to be on your PATH. Python 3.10 or newer. The distribution is named compress-cli; the command and the import name are both compress.

Check what landed on your machine at any time:

compress --check

compress 1.2.0
Python 3.12.10 on Windows 11 (AMD64)

Video and audio (FFmpeg)
  OK       ffmpeg version 6.0-essentials_build
           bundled with this package
           ffmpeg:  ...\site-packages\ffmpeg\binaries\bin\ffmpeg.exe
           ffprobe: ...\site-packages\ffmpeg\binaries\bin\ffprobe.exe

  OK       H.264 video (.mp4, .mkv, .mov) (libx264)
  OK       VP9 video (.webm) (libvpx-vp9)
  OK       AAC audio (.m4a) (aac)
  OK       MP3 audio (.mp3) (libmp3lame)
  OK       Opus audio (.opus) (libopus)
  OK       Vorbis audio (.ogg) (libvorbis)
  OK       FLAC audio (.flac) (flac)

Images (Pillow)
  OK       Pillow 11.3.0
           formats: JPEG, PNG, WEBP, AVIF, GIF

PDF (pikepdf)
  OK       pikepdf 10.11.0

Everything is installed. All supported file types will work.

What gets installed, and where

Component	Comes from	Installed where
ffmpeg + ffprobe	ffmpeg-binaries	inside your environment's site-packages
Image support	pillow	site-packages
PDF support	pikepdf (bundles qpdf)	site-packages

Everything lives inside the Python environment you installed into — a venv, a conda env, or your user site-packages. Nothing is written to system directories, nothing touches your PATH, and uninstalling removes all of it:

pip uninstall compress-cli ffmpeg-binaries

Platforms without a prebuilt FFmpeg

Windows x64, macOS (Intel and Apple Silicon) and Linux x86_64 get FFmpeg automatically. On Linux ARM, Alpine/musl and 32-bit Windows there is no prebuilt wheel, so compress --check will report it and you have two options:

pip install "compress-cli[ffmpeg]"   # fetches a build for your platform
sudo apt install ffmpeg              # or use your system package manager

A system FFmpeg already on PATH is picked up automatically. To point at a specific build, set COMPRESS_FFMPEG and COMPRESS_FFPROBE.

Images and PDFs never need FFmpeg at all.

The target size is a hard limit

The second argument is the maximum size of the result in megabytes.

1 MB = 1,000,000 bytes, so compress "video.mp4" 50 guarantees:

actual_output_bytes < 50,000,000

This is not an estimate. Every candidate encode is measured on disk and re-opened by an independent reader — Pillow for images, ffprobe for video and audio, pikepdf for PDFs — before it can be accepted. A 50.1 MB result is never reported as a success for a 50 MB request.

If the target genuinely cannot be reached, the command says so and exits with status 1:

Error: Target size could not be achieved.

Target:               1.0 MB
Smallest valid output: 3.2 MB

Even at 256x144 and the minimum usable bitrate (24 kbps video + 32 kbps audio),
a 124.0s clip cannot fit in the requested size.

Examples

# Video
compress "D:\Videos\movie.mp4" 50
compress "clip.mkv" 8
compress "screen-recording.webm" 25

# Images
compress "D:\Photos\holiday.jpg" 5
compress "screenshot.png" 0.5
compress "banner.webp" 1

# Audio
compress "D:\Music\song.wav" 10
compress "podcast.mp3" 20
compress "interview.m4a" 5

# PDF
compress "D:\Documents\report.pdf" 2
compress "scan.pdf" 1.5

Fractional targets work: 0.5, 1.5, 49.9 are all valid.

Where the output goes

Next to the original, with _compressed before the extension:

D:\Videos\movie.mp4      ->  D:\Videos\movie_compressed.mp4
D:\Photos\photo.jpg      ->  D:\Photos\photo_compressed.jpg
D:\Music\song.wav        ->  D:\Music\song_compressed.mp3

The original is never modified or overwritten. If movie_compressed.mp4 already exists, the next free name is used — movie_compressed_1.mp4, movie_compressed_2.mp4, and so on. Names are reserved atomically, so two runs at the same time cannot collide.

The absolute output path is printed on success and is available as result.output_path.

Already small enough?

Nothing is re-encoded and nothing is degraded:

File is already below the requested target.

Original: 20.0 MB
Target:   50 MB

No compression necessary; the original was left untouched.

No new file is created — result.output_path is the original path and result.skipped is True.

Supported files

Kind	Extensions	Engine
Image	.jpg .jpeg .png .webp .avif .gif .bmp .tif .tiff	Pillow
Video	.mp4 .mkv .mov .webm .avi .m4v .wmv .flv .mpg .ts .3gp	FFmpeg
Audio	.mp3 .wav .m4a .aac .flac .ogg .opus .wma .aiff	FFmpeg
PDF	.pdf	pikepdf (+ Ghostscript when installed)

The media type is detected from the file's contents, not its name, so a mislabelled .mp4 that actually holds a PDF is handled correctly. An .mp4 containing only an audio track is compressed as audio.

When the format changes

Your extension is preserved whenever it can be. It changes only when keeping it would make the target unreachable, and the change is always reported:

Input	Output	Why
.wav	.flac	Lossless and typically 40–60% smaller. Audio is bit-for-bit identical.
.wav	.mp3	When even FLAC will not fit.
.mp3	.opus	Only below roughly 48 kbps, where MP3 stops being listenable.
.png	.webp	Last resort, after lossless optimisation, palette reduction and downscaling have all failed. Transparency is preserved.
.webm	.mp4	Only if this FFmpeg build has no VP9 encoder.

result.format_changed tells you whether this happened.

How it picks settings

The problem being solved is:

maximise quality   subject to   output_size < target_size

Not "make it as small as possible" — a 50 MB request should come back at 48.9 MB with good quality, not 12 MB with bad quality.

• Images — binary search over encoder quality at full resolution. PNGs try maximum-effort lossless deflate first, then adaptive palette reduction, and only then downscaling.
• Video — the byte budget is split into audio + container overhead + video, an opening bitrate is derived from the duration, and each measurement corrects the next guess proportionally. Resolution steps down only when the bitrate is too thin for the frame size.
• Audio — lossless FLAC first for lossless sources. Otherwise the source's own codec at a searched bitrate, dropping to mono, then to a lower sample rate, then to Opus.
• PDF — lossless structural optimisation first (text, fonts and vectors are never touched). Then embedded images are re-encoded at a searched quality. Images that would grow, and stencil masks, are left alone.

Encodes are budgeted (six to eight per run), so a run converges instead of grinding through dozens of attempts.

Python API

from compress import compress

result = compress(r"D:\Videos\movie.mp4", 50)

print(result.output_path)  # D:\Videos\movie_compressed.mp4
print(result.output_size_mb)  # 48.87
assert result.output_size_bytes < 50_000_000

CompressionResult carries:

Field	Meaning
input_path	the original file, untouched
output_path	absolute path of the result
input_size_bytes	original size
output_size_bytes	measured size of the result
target_size_bytes	target_mb * 1_000_000
saved_bytes	bytes removed
reduction_percent	percentage removed
media_type	MediaType.VIDEO, .IMAGE, .AUDIO or .PDF
attempts	every measured encode, with its settings and size
target_achieved	always True on a returned result
skipped	True when the input was already small enough
format_changed	True when the extension had to change
notes	human-readable explanations of any decisions

Optional keyword arguments:

compress(
    path,
    target_mb,
    output_path=None,  # write somewhere specific
    reporter=None,  # progress callbacks; ConsoleReporter() prints them
    overwrite=False,  # allow output_path to replace an existing file
    timeout=None,  # seconds per encoder invocation
)

Errors

All of them subclass CompressError:

Exception	Raised when
InputFileError	missing, empty, unreadable, or a directory
InvalidTargetError	the target is not a positive, finite number
UnsupportedFormatError	no backend handles this file type
MissingDependencyError	FFmpeg is needed but not installed
TargetNotAchievableError	no valid output fits under the target
OutputValidationError	a produced file failed its final check

from compress import compress, TargetNotAchievableError

try:
    result = compress("video.mp4", 0.1)
except TargetNotAchievableError as exc:
    print(exc.smallest_valid_bytes)  # what was actually achievable

Command-line options

The two positional arguments are the whole primary interface. These exist for scripting:

-o, --output PATH   write here instead of <name>_compressed<ext>
    --overwrite     allow --output to replace an existing file
-q, --quiet         print only the output path
    --json          print the result as JSON
    --timeout SEC   give up on a single encoder run after this long
    --version

Exit codes: 0 success, 1 target not achievable, 2 bad input or usage, 3 FFmpeg missing.

compress "movie.mp4" 50 --json

{
  "input_path": "D:\\Videos\\movie.mp4",
  "output_path": "D:\\Videos\\movie_compressed.mp4",
  "output_size_bytes": 48871234,
  "target_size_bytes": 50000000,
  "reduction_percent": 40.6912,
  "media_type": "video",
  "attempts": 3,
  "target_achieved": true
}

What this tool will not do

The size guarantee is met by genuinely re-encoding, never by faking it. The package will not truncate files, strip bytes, break containers, rename extensions to disguise content, or write sparse files. If a valid file below the target cannot be produced, it says so and writes nothing.

Notes and limits

• Sizes are decimal (1 MB = 1,000,000 bytes), matching how storage is sold and how upload limits are usually quoted. Windows Explorer shows binary MB (1,048,576 bytes), so it will report a slightly smaller number than this tool does — never a larger one.
• A video needs a readable duration for bitrate targeting; without one the tool falls back to a quality-based search.
• A PDF that is pure text or vector art cannot be shrunk much. Rather than mangling the document, the tool reports what it managed and why.
• Subtitle, data and chapter tracks are dropped from re-encoded video.
• Encrypted or password-protected PDFs are rejected with a clear message.
• FFmpeg can be pointed at explicitly with the COMPRESS_FFMPEG and COMPRESS_FFPROBE environment variables; Ghostscript with COMPRESS_GHOSTSCRIPT.

Development

git clone https://github.com/priyadip/compress-cli
cd compress-cli
pip install -e ".[dev]"

pytest                  # add -m "not slow" to skip real encodes
ruff check . && ruff format --check .
mypy .
python -m build && twine check dist/*

License

MIT — see LICENSE.