CoupledModelDriver

CoupledModelDriver generates an overlying job submission framework and configuration directories for NEMS-coupled coastal ocean model ensembles.

pip install coupledmodeldriver

It utilizes NEMSpy to generate NEMS configuration files, shares common configurations between runs, and organizes spinup and mesh partition into separate jobs for dependant submission.

Documentation can be found at https://coupledmodeldriver.readthedocs.io

supported models and platforms

models
- circulation models
  - ADCIRC (uses ADCIRCpy)
  - SCHISM (uses PySCHISM)
- forcings
  - ATMESH
  - WW3DATA
  - HURDAT best track
  - OWI
platforms
- local
- Slurm
  - Hera
  - Stampede2
  - Orion

organization / responsibility

CoupledModelDriver is developed for the COASTAL Act project by the Coastal Marine Modeling Branch (CMMB) of the Office of Coast Survey (OCS), a part of the National Oceanic and Atmospheric Administration (NOAA), an agency of the United States federal government.

Zachary Burnett (lead) - zachary.burnett@noaa.gov
William Pringle - wpringle@anl.gov
Saeed Moghimi - saeed.moghimi@noaa.gov

usage example

1. generate JSON configuration files

initialize_adcirc creates JSON configuration files according to the given parameters. ADCIRC run options that are not exposed by this command, such as runs or gwce_solution_scheme, can be specified by directly modifying the JSON files. The following creates JSON files for coupling (ATMESH + WW3DATA) -> ADCIRC over a small Shinnecock Inlet mesh:

initialize_adcirc \
    --platform HERA \
    --mesh-directory /scratch2/COASTAL/coastal/save/shared/models/meshes/shinnecock/v1.0 \
    --output-directory hera_shinnecock_ike_spinup_tidal_atmesh_ww3data \
    --modeled-start-time 20080823 \
    --modeled-duration 14:06:00:00 \
    --modeled-timestep 00:00:02 \
    --nems-interval 01:00:00 \
    --adcirc-executable /scratch2/COASTAL/coastal/save/shared/repositories/CoastalApp/ALLBIN_INSTALL/NEMS-adcirc-atmesh-ww3data.x \
    --adcirc-processors 40
    --adcprep-executable /scratch2/COASTAL/coastal/save/shared/repositories/CoastalApp/ALLBIN_INSTALL/adcprep \
    --modulefile /scratch2/COASTAL/coastal/save/shared/repositories/CoastalApp/modulefiles/envmodules_intel.hera \
    --forcings tidal,atmesh,ww3data \
    --tidal-source TPXO \
    --tidal-path /scratch2/COASTAL/coastal/save/shared/models/forcings/tides/h_tpxo9.v1.nc \
    --tidal-spinup-duration 12:06:00:00 \
    --atmesh-path /scratch2/COASTAL/coastal/save/shared/models/forcings/shinnecock/ike/wind_atm_fin_ch_time_vec.nc \
    --ww3data-path /scratch2/COASTAL/coastal/save/shared/models/forcings/shinnecock/ike/ww3.Constant.20151214_sxy_ike_date.nc

This will create the directory hera_shinnecock_ike_spinup_tidal_atmesh_ww3data/ with the following JSON configuration files:

📂 hera_shinnecock_ike_spinup_tidal_atmesh_ww3data/
┣ 📜 configure_adcirc.json
┣ 📜 configure_atmesh.json
┣ 📜 configure_modeldriver.json
┣ 📜 configure_nems.json
┣ 📜 configure_slurm.json
┣ 📜 configure_tidal_forcing.json
┗ 📜 configure_ww3data.json

These files contain relevant configuration values for an ADCIRC run. You will likely wish to change these values to alter the resulting run, before generating the actual model configuration. For instance, NEMS connections and the run sequence need to be manually specified in configure_nems.json.

2. generate model configuration files

generate_adcirc generates an ADCIRC run configuration (fort.14, fort.15, etc.) using options read from the JSON configuration files (generated in the previous step).

cd hera_shinnecock_ike_spinup_tidal_atmesh_ww3data
generate_adcirc

The resulting configuration will look like this:

📂 hera_shinnecock_ike_spinup_tidal_atmesh_ww3data/
┣ 📜 configure_adcirc.json
┣ 📜 configure_atmesh.json
┣ 📜 configure_modeldriver.json
┣ 📜 configure_nems.json
┣ 📜 configure_slurm.json
┣ 📜 configure_tidal_forcing.json
┣ 📜 configure_ww3data.json
┣ 📂 spinup/
┃  ┣ 📜 fort.13
┃  ┣ 🔗 fort.14 -> ../fort.14
┃  ┣ 📜 fort.15
┃  ┣ 📜 nems.configure
┃  ┣ 📜 model_configure
┃  ┣ 🔗 atm_namelist.rc -> ./model_configure
┃  ┣ 📜 config.rc
┃  ┣ 📜 setup.job
┃  ┗ 📜 adcirc.job
┣ 📂 runs/
┃  ┗ 📂 unperturbed/
┃    ┣ 📜 fort.13
┃    ┣ 🔗 fort.14 -> ../../fort.14
┃    ┣ 📜 fort.15
┃    ┣ 🔗 fort.67.nc -> ../../spinup/fort.67.nc
┃    ┣ 🔗 fort.68.nc -> ../../spinup/fort.68.nc
┃    ┣ 📜 nems.configure
┃    ┣ 📜 model_configure
┃    ┣ 🔗 atm_namelist.rc -> ./model_configure
┃    ┣ 📜 config.rc
┃    ┣ 📜 setup.job
┃    ┗ 📜 adcirc.job
┣ 📜 fort.14
┣ 📜 cleanup.sh
┗ 📜 run_hera.sh

3. run the model

The previous step will also have generated a script called ./run_hera.sh. You can run it to submit the model run to the Slurm job queue:

./run_hera.sh

The queue will have the following jobs added:

   JOBID CPU NODE DEPENDENCY       NODELIST(REA NAME
20967647 1   1    (null)           (None)       ADCIRC_SETUP_SPINUP
20967648 40  1    afterok:20967647 (Dependency) ADCIRC_COLDSTART_SPINUP
20967649 1   1    (null)           (None)       ADCIRC_SETUP_unperturbed
20967650 42  2    afterok:20967649 (Dependency) ADCIRC_HOTSTART_unperturbed

4. track model progress

check_completion checks the completion status of a running model directory.

cd hera_shinnecock_ike_spinup_tidal_atmesh_ww3data
check_completion

{
    "hera_shinnecock_ike_spinup_tidal_atmesh_ww3data": {
        "spinup": "running - 15%",
        "runs": "not_started - 0%"
    }
}

you can also pass a specific directory (or several directories):

check_completion spinup

{
    "spinup": "running - 27%"
}

cd run_20211027_florence_besttrack_250msubset_quadrature
check_completion runs/*_13

{
    "vortex_4_variable_perturbation_13": "completed - 100.0%",
    "vortex_4_variable_quadrature_13": "not_started - 0%"
}

if a run has an error, you can pass --verbose to see detailed logs:

check_completion spinup

{
    "spinup": "error - 0%"
}

check_completion spinup --verbose

{
    "spinup": {
        "status": "error",
        "progress": "0%",
        "error": {
            "ADCIRC_SETUP_SPINUP.err.log": [
                "forrtl: severe (24): end-of-file during read, unit -4, file /proc/92195/fd/0\n",
                "Image              PC                Routine            Line        Source             \n",
                "adcprep            000000000069A72E  Unknown               Unknown  Unknown\n",
                "adcprep            00000000006CBAAF  Unknown               Unknown  Unknown\n",
                "adcprep            000000000050A5CB  openprepfiles_           6996  prep.F\n",
                "adcprep            0000000000507F22  prep13_                   753  prep.F\n",
                "adcprep            000000000042E2E9  prepinput_                717  adcprep.F\n",
                "adcprep            000000000042BCDB  MAIN__                    239  adcprep.F\n",
                "adcprep            000000000040B65E  Unknown               Unknown  Unknown\n",
                "libc-2.17.so       00002AAEC02EB555  __libc_start_main     Unknown  Unknown\n",
                "adcprep            000000000040B569  Unknown               Unknown  Unknown\n",
                "srun: error: h24c51: task 0: Exited with exit code 24\n",
                "srun: launch/slurm: _step_signal: Terminating StepId=25366266.1\n"
            ]
        }
    }
}

check_completion runs

{
    "spinup": "failed - 0%"
}

check_completion runs --verbose

{
    "runs": {
        "status": "failed",
        "progress": "0%",
        "failed": {
            "fort.16": "ADCIRC output file `fort.16` not found"
        },
        "error": {
            "ADCIRC_SETUP_unperturbed.err.log": [
                "slurmstepd: error: execve(): /scratch2/COASTAL/coastal/save/shared/repositories/CoastalApp/ADCIRC/ALLBIN_INSTALL/adcprep: No such file or directory\n",
                "srun: error: h18c49: task 0: Exited with exit code 2\n",
                "srun: launch/slurm: _step_signal: Terminating StepId=25366268.0\n"
            ]
        }
    }
}

Metadata

Release files for coupledmodeldriver 1.7.1.post1

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for coupledmodeldriver 1.7.1.post1
File	Size	Uploaded
coupledmodeldriver-1.7.1.post1.tar.gz	63.7 kB	Aug 8, 2024	Details

Built distribution (wheel)

Table of built distributions (wheels) for coupledmodeldriver 1.7.1.post1
File	Interpreter	ABI	Platform	Reset
coupledmodeldriver-1.7.1.post1-py3-none-any.whl 77.4 kB Aug 8, 2024	Python 3	none	any	Details

Total release size: 141.2 kB

Release files / coupledmodeldriver-1.7.1.post1.tar.gz

Download URL	coupledmodeldriver-1.7.1.post1.tar.gz
Size	63.7 kB
Tags	Source
SHA-256 checksum How to use checksums	`c6afbb285f7f0e35903644ea22654e555ec441d7ae09b70921262e7404798991`
BLAKE2b-256 checksum How to use checksums	`d2a1479eaea8994921fe4cc06aa531d7257a8b682c8a2315787a512d87fb1eaf`
Upload date	Aug 8, 2024
Uploaded using Trusted Publishing? What is trusted publishing?	No
Uploaded via	`poetry/1.2.2 CPython/3.10.12 Linux/6.5.0-1025-azure`

Release files / coupledmodeldriver-1.7.1.post1-py3-none-any.whl

Download URL	coupledmodeldriver-1.7.1.post1-py3-none-any.whl
Size	77.4 kB
Tags	Python 3
SHA-256 checksum How to use checksums	`a19e8f0129b1f1dddcd7f82cf14fe4051ee6f4c6bc81c83e477c8cc4911924dc`
BLAKE2b-256 checksum How to use checksums	`8ee8afc261021efd6d56e9ade46babbed1cfe3bc6abbded7677f49aab3e94b48`
Upload date	Aug 8, 2024
Uploaded using Trusted Publishing? What is trusted publishing?	No
Uploaded via	`poetry/1.2.2 CPython/3.10.12 Linux/6.5.0-1025-azure`