crclink 0.2.0

CRC-protected JSON and text line framing for embedded serial links

crclink

CRC-protected JSON and text line framing for serial-style embedded links.

crclink ships both sides of the wire: a Python library for the host and a C firmware companion for the device, so the same frames build, verify, and decode on either end.

• Host (Python): this package, with no runtime dependencies. Encode, decode, and verify frames, plus a crclink CLI. Install with uv add crclink.
• Device (C): a no-heap, no-runtime-dependency implementation under src/c/. It builds and CRC-stamps frames straight to a serial sink and verifies/reads incoming flat-JSON commands. See src/c/README.md.

Both sides compute CRC-16/XMODEM over the same coverage, so a frame built on one verifies on the other; the test suites cross-check both directions.

Features

• JSON line framing with a trailing crc key.
• Text line framing with trailing CRC suffix.
• CRC-16/XMODEM validation.
• Matching Python (host) and C (device) implementations.

CRC engine

crclink does not reimplement CRC-16/XMODEM. It vendors a self-contained module that crcglot generates (src/crclink/crc16_xmodem.py), so the wheel installs with no runtime dependencies. crcglot owns the algorithm and its parameters and emits the code; crclink ships the generated copy and regenerates it whenever crcglot is bumped. The C firmware vendors the same crc16-xmodem the same way, so both ends stay in lockstep.

crcglot is a build-time code generator here (a dev dependency, crcglot>=0.22.0), not something the package imports at run time. See docs/crcglot-integration.md for the integration details: both the host and the firmware vendor generated code, plus the cross-end test vectors.

CLI

Installing crclink puts a crclink command on your path. It encodes and decodes single frames, and verifies a whole file of them.

# Encode (prints the framed line)
crclink encode-json '{"t":1234,"v":42}'        # -> {"t":1234,"v":42,"crc":"1352"}
crclink encode-text "PING"                       # -> PING e0e7
crclink encode-text "PING" --prefix 0x           # -> PING 0xe0e7

# Decode and verify one frame (prints a JSON result, exit 1 on a bad CRC)
crclink decode-json '{"t":1234,"v":42,"crc":"1352"}'
crclink decode-text "PING e0e7"

# Verify every frame in a file, line by line
crclink verify-file frames.jsonl --format json   # a file of JSON lines
crclink verify-file log.txt --format text         # a file of text lines
crclink verify-file mixed.lines                    # auto-detect each line
cat frames | crclink verify-file -                 # read from stdin

verify-file skips blank lines, reports each line as ok or FAIL with its number and reason, prints a verified X/Y summary, and exits non-zero if any line fails (so it slots into a shell pipeline). With auto (the default) a line starting with { is treated as JSON and anything else as text. Use --quiet to print only failures and the summary.

On the device (C)

The firmware speaks the same frames both ways: verify an incoming command, read its fields by key, then build and CRC-stamp the reply. Numbers are converted for you, with no heap and no runtime dependencies. Here a host sends the monitor command mem byte 0x1234 and the device returns the byte at that address (cmd: uint32 -> v: uint8):

#include "crclink_json.h"        // build the reply frame
#include "crclink_json_read.h"   // read the incoming command

void handle_line(const char *line) {              // {"cmd":"mem byte 0x1234","crc":"5993"}
    if (crclink_json_verify(line) != 0) return;   // bad CRC: drop the frame
    char cmd[32];
    if (crclink_json_get_str(line, "cmd", cmd, sizeof cmd) < 0) return;

    uint32_t addr;                                // pull the address out (your parser)
    if (sscanf(cmd, "mem byte %" SCNx32, &addr) != 1) return;

    uint8_t value = *(volatile uint8_t *)(uintptr_t)addr;   // read the address
    crclink_json_t j;
    crclink_json_start(&j, uart_sink, NULL);      // your per-byte serial sink
    crclink_json_int_add(&j, "v", value);
    crclink_json_end(&j);                         // -> {"v":42,"crc":"37c2"}
}

The reply streams out a byte at a time through your sink and decodes on the host with crclink.decode_json_frame. See src/c/README.md for the builder and reader APIs in full, failure handling, and filling a C struct from a command.

Install

uv add crclink

Development

uv sync
uv run pytest

Test across the supported Python versions with tox, which builds each env with uv (not pip):

uvx --with tox-uv tox run            # every version plus the ruff/ty lint env
uvx --with tox-uv tox run -e py312   # one version