Cosmic-Ray Neutron Python (CRNPy) Library

Overview

Welcome to the homepage of the CRNPy (Cosmic-Ray Neutron Python) library, an open-source Python library designed for the processing and conversion of raw neutron counts from cosmic-ray neutron probes (CRNP) into soil moisture data.

This library has been developed with the intent of providing a comprehensive yet easy-to-use workflow for processing raw data from a variety of CRNP, encompassing multiple manufacturers and models.

Statement of Need

CRNPs are a valuable tool for non-invasive soil moisture estimation at the hectometer scale (e.g., typical agricultural fields), filling the gap between point-level sensors and large-scale (i.e., several kilometers) remote sensors onboard orbiting satellites. However, cleaning, processing, and analyzing CRNP data involves multiple corrections and filtering steps spread across multiple peer-reviewed manuscripts. CRNPy simplifies these steps by providing a complete, user-friendly, and well-documented library with minimal dependencies that includes examples to convert raw CRNP data into soil moisture. The library is designed to be accessible to both researchers and instrument manufacturers. Unlike other similar libraries, CRNPy does not require any specific naming convention for the input data or large external data sources, or reanalysis data.

Key Features

• Versatile and instrument agnostic: CRNPy can handle data from various CRNP manufacturers and models. It has been successfully tested on both roving and stationary CRNP.

• Modular: The library is designed to be modular, allowing users to easily customize the processing workflow to their needs.

Installation

To install the CRNPy library, you can use Python's package manager. Open a terminal and type:

pip install crnpy

from the Jupyter notebook, type:

!pip install crnpy

Ideally dependencies should be installed automatically. If not, you can install them manually by typing:

pip install -r requirements.txt

The CRNPy library is compatible with Python 3.8 and above. See requirements.txt for a list of dependencies.

Examples

• [https://soilwater.github.io/crnpy/examples/stationary/example_RDT_station/](Processing and analyzing data from a stationary detector)
• [https://soilwater.github.io/crnpy/examples/rover/Hydroinnova_rover_example/](Processing and analyzing data from a roving detector)
• [https://soilwater.github.io/crnpy/examples/calibration/calibration/](Device-specific field calibration)

Authors

The CRNPy library was developed at the Kansas State University Soil Water Processes Lab by:

• Joaquin Peraza

• Andres Patrignani

The Soil Water Processes Lab at Kansas State University combines a range of experimental and computational approaches to tackle pressing issues in soil and water research. The development of the CRNPy library is a step forward to creating reproducible data processing workflows across the scientific community using cosmic-ray neutrons probes for soil moisture sensing.

Community Guidelines

Contributing

To contribute to the software, please first fork the repository and create your own branch from main. Ensure your code adheres to our established code structure and includes appropriate test/examples coverage. CRNPy source code is located in the /src/crnpy/ folder, and tests implemented using pytest are stored in the /src/tests/ folder. Submit a pull request with a clear and detailed description of your changes to include them in the main repository.

To build the documentation locally, install the documentation toolchain with pip install -r requirements-docs.txt and run mkdocs build (or mkdocs serve) from the repository root.

Reporting Issues

If you encounter any issues or problems with the software, please report them on our issues page. Include a detailed description of the issue, steps to reproduce the problem, any error messages you received, and details about your operating system and software version.

Seeking Support

If you need support, please first refer to the documentation. If you still require assistance, post a question on the issues page with the question tag. For private inquiries, you can reach us via email at jperaza@ksu.edu or andrespatrignani@ksu.edu.

Changelog

Version 0.7.0

Changes since version 0.6.1. Items marked breaking change the public API.

• breaking nrad_weight() now implements only the revised footprint weighting of Schrön et al. (2017). The Köhli et al. (2015) weighting and the method argument were removed; profiles and p must be provided. Sample depth is in cm, consistent with the penetration depth D86, which the paper defines in cm.
• Fixed nrad_weight(): the horizontal weighting function was evaluated with soil moisture in place of air humidity and vegetation height in place of soil moisture, so air humidity never entered the weights and profiles beyond 50 m received negative weights. Both weighting functions now use the site air humidity and the field-average soil moisture of the current iteration, as in Sect. 3 of Schrön et al. (2017) and its R/MATLAB supplement. Field-average values from earlier versions will differ.
• Fixed correction_incoming_flux() with Rc_method='McJannetandDesilets2023': the factor returned was the reciprocal of what the library's convention (counts divided by fi) requires, so the correction acted in the wrong direction. It now returns tau*(I/Iref) + 1 - tau following Eq. 10 of McJannet and Desilets (2023), and reduces to I/Iref when site and reference coincide.
• Fixed correction_road(): the moisture term had the wrong sign on p2 and omitted p5, which inflated instead of reduced the counts. It now implements Eq. 6 and Table 1 of Schrön et al. (2018) with a new p5=0.39 argument, and a road width of zero returns the counts unchanged instead of raising an error.
• correction_bwe(): the default r2_N0 was 0.05, ten times the value of Baatz et al. (2015). The default is now 0.0053 (r2 = 6.4 cph per kg m-2 BWE, N0 = 1210 cph).
• Fixed uncertainty_counts(metric='cv'): the coefficient of variation was multiplied by the correction factors; it is now 1/sqrt(N) (Jakobi et al., 2020, Eq. 7).
• sensing_depth(): the documentation now states the result is in cm for both methods (Franz et al., 2012, Eq. 5; Schrön et al., 2017, Eq. 4). In the Schron_2017 method the lattice water is converted to volumetric water equivalent with the bulk density before entering D86 (Schrön et al., 2017, Eq. 2), as already done in the Franz_2012 method; this changes the Schrön depth by a few percent.
• cutoff_rigidity(): the bundled world grid was replaced by the published grid of calculated vertical cutoff rigidities for epoch 1995.0 of Smart and Shea (2008, Proc. 30th ICRC, 1, 733-736), tabulated every 5 degrees in latitude and 15 degrees in longitude, and west longitudes are now mapped onto the 0-360 east longitude grid (previously they were mirrored, which happened to compensate a shift in the western half of the old table). Against 102 neutron monitors the mean absolute error drops from 0.27 to 0.18 GV. Returned values change by up to a few tenths of a GV, and by more in South America. The function now cites only that source.
• lattice_water(): the documentation now states that inputs and output are gravimetric (percent by mass), and how to convert the result to the g/g fraction used as Wlat elsewhere in the library. No change in the calculation.
• Fixed exp_filter(): a single missing value made the rest of the series NaN. The gain now uses the time elapsed since the last available observation (Albergel et al., 2008, Eq. 6), so gaps are skipped and the filter continues. Results are unchanged for series without gaps.
• Fixed remove_incomplete_intervals(): the first row was always removed because its time difference is undefined; it is now kept unless remove_first=True.
• Fixed smooth_1d() with a DataFrame and method='savitzky_golay', which raised an error and modified the input in place.
• Fixed is_outlier() when min_val/max_val are omitted (it raised a type error). The 'range' method listed in the documentation is now implemented, and 'scaled_mad' is two-sided (values below the median are also flagged), as in MATLAB isoutlier.
• Fixed find_neutron_monitor() when no station has data for the requested period (it raised an error); the ten closest stations are now returned with Period available set to False.
• get_incoming_neutron_flux() tries at most three times, pausing five seconds between attempts, when the NMDB endpoint returns a page without the data block, which it does intermittently even when data are available. If no data block is found after three attempts it prints a message suggesting to wait a minute and returns None cleanly (previously a single failed response returned None, which made find_neutron_monitor() report every station as unavailable during such spells).
• interpolate_incoming_flux() keeps periods without NMDB data as NaN instead of failing an assertion; use fill_na in correction_incoming_flux().
• idw() returns the observed value at prediction points that coincide with an observation instead of NaN.
• total_raw_counts() fills a missing detector with the mean of the other detectors only when more than one detector column is present (the previous check looked at the number of rows).
• Error messages raised as plain strings in spatial_average(), interpolate_2d() and uncertainty_counts() are now proper ValueError exceptions; the NaN warning in interpolate_2d() now reports the actual counts.
• Compatibility with pandas 2.2 and 3: fill_missing_timestamps() defaults to the frequency alias 'h' (the 'H' alias is deprecated in pandas 2.2 and removed in pandas 3) and the examples use it; datetime columns of any resolution or time zone are accepted; chained in-place assignments and column assignments on filtered frames, which warn in pandas 2 and stop working in pandas 3, were removed from the examples and tests.
• Added requirements-docs.txt with the pinned documentation toolchain (MkDocs 1.x, Material, mkdocstrings, mkdocs-autorefs, mkdocs-jupyter, glightbox); the documentation page on correction routines had six cross-references to non-existent function names, now fixed, and describes the footprint weighting used for calibration.
• Documentation corrections in correction_pressure() (reference pressure and attenuation length), correction_humidity() (input is absolute humidity), counts_to_vwc() (full equation and gravimetric units of Wlat and Wsoc, after Hawdon et al., 2014, Eq. 7), abs_humidity() (returns absolute humidity), get_incoming_neutron_flux() (NMDB acknowledgement, printed with verbose=True) and latlon_to_utm().