crowsnest

One session that watches your other Claude Code sessions.

A machine running many Claude Code sessions has a question nobody answers: what are they all doing, and which of them needs me? Each session knows only itself, the terminal tabs are silent until you click them, and the answer lives in forty scrollbacks.

crowsnest reads what Claude Code already writes, the registry it keeps for every running session and the transcript each one appends to, and answers in three tiers, cheapest first. It can start a new named session (crowsnest spawn), but it never sends into, kills, or otherwise writes into a session that already exists.

Start here

pip install crowsnest          # Python 3.10+. Puts a `crowsnest` command on your PATH.
crowsnest install-skills       # link the skills and the scout subagent into ~/.claude
crowsnest init --hooks         # in the directory you will run the lookout from

init writes that directory's CLAUDE.md (the rules that keep a watching session small enough to be cleared at any moment), creates ~/.local/share/crowsnest/, and — with --hooks — adds three lines to your settings.json, after backing it up and removing nothing. Without --hooks it prints them for you to paste. The two that push events (Stop, Notification) are registered async, so watching costs the watched sessions no wall-clock; the SessionStart one blocks, because its roster is meant to be read.

Then open a session, name it, and ask in whatever words you would have used anyway:

claude -n lookout

what are my sessions doing, and is anything waiting on me?

## Waiting on you
- xa_needed_or_not (xa, 25m) — input needed

## Just finished
- monitor (proj, 10m) — "The sweep landed. It's the repo-side view, and it's complementary…"

## Working
- openloops: one session, mid-turn on the one-command test.

## Headline
1 waiting on you, 1 just finished, 1 working, 29 idle.

That answer is a synthesis. Every row behind it is one the crowsnest command printed, and the skill tells the session how to go deeper when a row is not enough: read a session's earlier turns, ask the session itself, or arm the event stream and be told.

The three tiers

The skill's rule is to never spend a costlier tier when a cheaper one answers, and never to ask a session that is busy or waiting.

The command

crowsnest                          who is alive: waiting on you first, then busy, then idle
crowsnest show <session>           one session: last asked, last said, running now, pending question
crowsnest turns <session> -n 5     the last five turns, oldest first; --before N pages back
crowsnest brief <session>          openloops' dated digest for one session; reads no transcript
crowsnest report [--out FILE]      the roster as one phone-readable HTML page, no stylesheet or script
                                   (--fragment: without the document wrapper, for publishing as an artifact)
crowsnest watch                    one line per change, forever (started, exited, idle, busy, waiting, error)
crowsnest ledger [<session>]       one session's durable page, or all of them with ages
crowsnest hook <event>             called by your Stop and Notification hooks; reads their JSON on stdin
crowsnest spawn <name> --cwd <dir> start a named session in <dir>, and wait for it to show up
crowsnest open <session>           raise its terminal on the desktop, or say where it runs
crowsnest init                     this session's CLAUDE.md, the data directory, the hook lines
crowsnest install-skills           link the skills and the scout subagent into ~/.claude

open is a desktop command -- it looks for an iTerm tab or a tmux session and has nothing to raise from a web page, so a claude.ai artifact (crowsnest report) can only tell you where a session runs, never bring its terminal to the front for you.

<session> is the name you gave the session with claude -n <name>, a unique prefix of one, a session-id prefix, or a pid.

waiting  25m  xa_needed_or_not      xa           input needed · Let me split that into smaller steps.
busy     14m  session_monitor       openloops    → Bash: Run the one-command test
idle     10m  monitor               proj         "The sweep landed. It's the repo-side view…"
-- 32 live: 1 waiting, 1 busy, 30 idle

Several accounts and machines in one roster

Reading crosses accounts and machines; messaging does not, so a crowsnest session operates the fleet of its own account and machine and can read all the others. List them once:

# ~/.config/crowsnest/config.toml
[[homes]]
name = "main"
path = "~/.claude"

[[homes]]
name = "work"
path = "~/.claude-work"          # a second account on this machine

[[homes]]
name = "server"
path = "~/.cache/xa/remotes/server"   # a copy synced down with `xa sync`
remote = true                         # its pids are not ours: alive while fresh

Every report row links to the session on claude.ai (when it runs with Remote Control), to its repository, and to the issues and pull requests it mentioned. Then crowsnest --all-homes prints every home with a column saying which, crowsnest show name@home --all-homes picks one when a name exists in two, and crowsnest watch --all-homes streams events from all of them, each tagged name@home.

The ledger: what a session leaves behind

The roster and the transcript both describe now. Neither survives a /clear in the watching session, and neither says what a session decided or what it is still waiting on you for. So each session gets a small markdown file — ~/.local/share/crowsnest/ledger/<name>.md — that it writes and a watcher reads:

# lookout

state: working
last asked: 2026-09-06T18:12:00+00:00 · fix the widget
last said: 2026-09-06T18:14:22+00:00 · Fixed and merged; PR 12 is green.
open questions:
- squash or rebase for the release?
decisions:
- the ledger lives under ~/.local/share/crowsnest

## Notes

Anything at all. Nothing in crowsnest ever rewrites this part.

last asked and last said are mechanical — the Stop hook below writes them from the transcript tail, so they are true without anyone deciding anything. state, open questions and decisions are judgements, and only the session whose ledger it is writes those. A write rewrites the named fields and leaves every other byte alone, so a hook and a human can edit the same file minutes apart.

Being told instead of polling

crowsnest watch notices a change within a poll and has to read a transcript to guess why. Claude Code knows both exactly and immediately, and will say so — if you give it a line to say it on:

// ~/.claude/settings.json
"Stop":         [{"hooks": [{"type": "command", "command": "crowsnest hook stop", "async": true}]}],
"Notification": [{"hooks": [{"type": "command", "command": "crowsnest hook notification", "async": true}]}]

With those two lines, a turn ending becomes a stopped line in crowsnest watch carrying the session's last words, and a permission prompt or a question becomes a needs-you line carrying the message — both a poll sooner than the registry could notice, and both with the reason rather than a guess at it. crowsnest hook prints nothing and exits 0 whatever happens; async means Claude Code does not wait for it either, so watching costs the watched sessions no wall-clock. Without the hooks installed, crowsnest watch is exactly the registry diff it always was. crowsnest init --hooks writes all of this for you.

One walk, end to end

A morning with a fleet, from the lookout session. Everything in italics is something you say; everything else it does.

1. Open it. claude -n lookout in the directory you ran crowsnest init in. Its CLAUDE.md and the SessionStart hook put the roster in front of it before you type anything.
2. what needs me? — it sends the crowsnest-scout subagent, which reads the ledgers, then the roster, and hands back a page: who is waiting, who just finished, what is working. The rosters never enter the lookout's own context.
3. start something on the parser tests — the crowsnest-dispatch skill: it names the session, writes a brief that is pointers rather than prose (the issue URL, the acceptance line, the reply contract), and runs crowsnest spawn parser-tests --cwd ~/proj/parser --prompt "…". A new terminal session appears, named, in that directory. It subscribes once with notify_when_idle and stops looking.
4. It is told when that finishes — from the crowsnest watch stream under the Monitor tool, or from the one idle notice. Either way you hear about it without asking.
5. what did it do? — crowsnest ledger parser-tests. The worker wrote that file itself, under the crowsnest-worker skill, which every session on the machine has; the lookout only reads it. crowsnest brief parser-tests adds openloops' dated digest of the same session, still without opening a transcript.
6. give me a page — the crowsnest-report skill: crowsnest report --fragment --out fleet.html, published with the Artifact tool, one link, stable across re-publishes.
7. From your phone, later: you highlight the row for parser-tests, comment ask it what is left, and send it to Claude. The lookout wakes on the comment, answers from the ledger, replies in the thread, resolves it, and re-publishes the page.

At no point does the lookout edit a file in any of those repositories, or read a transcript itself. That is the whole design: the corpus sessions hold the context, and the lookout stays small enough to /clear at any moment.

What it ships for agents

crowsnest install-skills links all of them into ~/.claude (or --target) and never overwrites anything that is not already ours. The worker skill installs everywhere by default, because any session on the machine may be asked.

What the hooks add

crowsnest init --hooks registers two user-wide hooks, both asynchronous so they never delay a turn: Stop (a turn ended; the session's last words go to its ledger and the event log) and Notification (a session asked for something). It puts the roster-on-start hook only in the crowsnest directory's own .claude/settings.json, so no other session is handed a roster. An idle_prompt notification (a session merely sitting idle) is recorded but never streamed as needs-you.

What it reads

• ~/.claude/sessions/<pid>.json: written while a session runs. Name, session id, working directory, busy / idle / waiting, and when waiting, what for. Checked against a live process before it is reported, because a crash leaves the file behind.
• ~/.claude/projects/<slug>/<session-id>.jsonl: the transcript. Read from the end, widening until one human prompt is in view; turns reads the whole file on request.

What a transcript's content means is openloops' business, and crowsnest calls it rather than re-implementing it. openloops deliberately never looks at whether a process is running; crowsnest is that other half.

What it writes

Nothing into another session, and nothing into a repository. Everything crowsnest writes is its own and lives under ~/.local/share/crowsnest ($CROWSNEST_DATA_DIR or $XDG_DATA_HOME if you set either):

• ledger/<name>.md: one per session, as above.
• events.jsonl: one line per hook event, append-only, rotated by size. crowsnest watch tails it.
• hook.log: one line for anything crowsnest hook swallowed, so "the hook did nothing" is a question with an answer.

The only other writes in the package are crowsnest spawn, which starts a session, and install-skills, which writes symlinks.

From Python

from crowsnest import (
    roster,
    show,
    turns,
    brief,
    events,
    live_sessions,
    spawn,
    read_ledger,
    update_ledger,
)

roster()["counts"]  # {'waiting': 1, 'busy': 1, 'idle': 30, 'other': 0}
show("monitor")["activity"]["last_assistant_text"]
brief("monitor")["digest"]  # openloops' dated digest, or None if there is none yet
update_ledger("monitor", state="working", open_questions=["squash or rebase?"])
read_ledger("monitor")["fields"]["last_said"]
for event in events(interval=5):  # forever
    ...
spawn("demo", cwd="/path/to/repo", prompt="run the tests")["pid"]

Every function takes home= (the Claude Code config directory; a synced copy of another machine's works the same way), the readers take is_alive= (how a registry pid is confirmed running), and everything that writes takes ledger_dir= or events_path=.

Not in crowsnest

Killing or resuming a session is xa's job (xa spawn is also the pointed replacement for crowsnest spawn's spawner seam, adding hosts and a phone web UI). Asking a session a question is Claude Code's own SendMessage; the skill says when.