cubit-mesh-export

Export high-order curved meshes from Coreform Cubit directly to Netgen/NGSolve .vol. Use check-vol to verify the exported mesh and its named regions and boundaries before analysis. The standalone tools run without Radia.

Nastran BDF export supports first- and second-order elements. Gmsh MSH 4.2 output supports visualization and post-processing. The ELF/MAGIC writer exports .meg directly from Cubit. The Export menu writes ASCII VTK XML .vtu and JMAG .jcf; the export vtk command writes Legacy .vtk.

Neutral CAD capture

export model_capture "model.json" units mm records CAD topology and explicit block/sideset identity for separate construction adapters, without meshing. Read the model-capture contract for supported source records, mandatory units, approximation limits and external physical mappings.

Explicit named periodic export

export netgen can write one named kt periodic identification directly into the .vol. All nine fields are required together: periodic_name (kt), periodic_master and periodic_slave (exact boundary labels), periodic_unit (m), periodic_patches (masterBC:slaveBC,...), periodic_tx, periodic_ty, periodic_tz, and periodic_match (positive finite geometric search distance). Zero translation components must still be supplied. Coordinates must already be in the declared unit; this option never rescales a model.

Patch numbers are BC properties, not FaceDescriptor indices or CAD surface IDs. The sidecar records the mapping. Shared patch-seam points are deduplicated and must satisfy every incident patch correspondence. All points must match uniquely and bijectively; no centroid inference, default distance, nearest-only choice or partial success is permitted. Existing identification groups reject the request. A named periodic export requires a fresh output path. A successful named export requires both the .vol and its complete .vol.json mapping record; a sidecar open, serialization, write, flush or close failure fails the export. The native VOL is staged and verified, then the record is completed, then the final VOL is published without replacing an existing target. A failed record cannot leave a published final VOL. A later publication failure may leave an orphan record; a record alone is never proof of a complete export.

A failed export is unqualified even if a file exists. It may leave the requested <name>.vol, <name>.vol.partial.vol and/or <name>.vol.json. The original error and exact paths are reported. Inspect that error first; before a new attempt, the owner must verify and remove only that owner's failed outputs, or choose a new fresh output path. The exporter does not delete paths whose ownership may have changed. Existing files are never treated as a successful retry or repaired silently.

Before inserting identifications, the exporter requires complete triangular face correspondence in both directions and synchronizes slave curved displacement coefficients from their master entities. Polynomial q1, q2 and q3 tetrahedra with linear connectivity are supported. Reversed canonical edge orientation negates the q3 odd mode; even edge modes and the symmetric q3 triangular face bubble copy unchanged. Translation acts on the existing corners, not on displacement coefficients. Vertices, connectivity and BCs are unchanged. Shared patch edges have one consistent owner. An edge or face that is both source and destination of coefficient transfers is rejected, including corners where two periodic directions would form a chained or cyclic mapping. Such multi-direction seam ownership is not supported; rejection occurs before writes. Unsupported representations or unequal paired coefficient orders reject before mutation; no repair flag or independent refit is applied after synchronization. The sidecar records global zero-based edge/face indices, zero-based modes, signs and coefficient transfers. Exact paired coefficient equality is checked before publication, without a new geometric tolerance. Mesh quality and field acceptance remain separate gates.

The exporter persists point triples with group 1, type PERIODIC, name kt, and checks exact geometry serialization before/after metadata insertion into the intentionally synchronized geometry. Consumers verify the saved group without adding or repairing identifications. Without an explicit periodic request, ordinary mesh export does not infer a periodic contract. Curved geometry and field accuracy are separate checks.

Gmsh MSH 4.2 export is post-processing support for visualization only; solver meshes and label/topology authority remain checked .vol files and their contracts. No .msh-to-.vol or solver-mesh import route is provided.

Mesh-only Gmsh quality APIs accept direct ASCII MSH 4.2 files only, not GEO programs or indirect Merge/Include inputs. Before any native initialization, NodeData/ElementData/ElementNodeData field tags above 2147483647 are rejected explicitly without remapping. Mesh-only size_t tags and pure-Python inventory reading have no such upper bound; field tag 2^28 remains supported. Independent validation can also compare explicit BDF/VTK reference meshes; MSH content is preflighted even under those suffixes, and GEO is rejected. The independent Gmsh Jacobian/volume calculations are unchanged.

Order-3 pyramid export to Gmsh is refused with an explicit element/order error: the native Gmsh 5 consumer cannot construct that type. No lower-order or fake element is substituted; pyramid orders 1 and 2 are unchanged.

cubit-plugin-install automatically registers the official Coreform WorkflowToolbar for each selected profile. No manual toolbar package import is required. Existing user toolbars and unrelated preferences are preserved; the toolbar becomes available at the next Cubit start. MCP remains batch-only.

Solver-neutral mesh export from Coreform Cubit to NGSolve/Netgen.

cubit-mesh-export is an independent Cubit tooling distribution. It ships its own MCP server, mesh export, the Kelvin open-boundary transformation, symmetry helpers, and the Dirichlet label conventions consumed by Radia's Simulink applications, Python/MCP workflows, and result-bearing documentation notebooks.

Features

The standalone GUI, installer, and cubit-toolbar-smoke-test release check are owned by this distribution and require no Radia installation. The former radia.install_panels and Radia GUI paths are removed, with no compatibility shims. Existing deployments must regenerate their startup registration using cubit-plugin-install from the selected Python environment. See the MCP cubit_toolbar_guide for the operating contract.

The GUI and MCP are distributed independently. The repository includes tools/release_cubit_dual.py for verifying a release on a licensed Cubit installation.

The supported binary runtime is 64-bit Windows, CPython 3.12, Coreform Cubit 2026.8, and Netgen/NGSolve 6.2.2608. These solver versions are exact pins in package metadata because cubit_mesh_curver.pyd links against the Netgen C++ ABI. The separately loaded cubit_mesh_export.ccm plugin embeds Compact Netgen and does not link against the Python solver wheels. For LLM operation, the canonical manual is the included cubit_mesh_export.mcp server: start with cubit_status and cubit_docs; use APREPRO through its headless execution tools and cubit_check_vol before handing a mesh to a solver. Combined Radia installations must also pass Radia's declared exporter compatibility check; standalone operation does not import Radia.

• Cubit plugin (.ccm + .pyd, Coreform Cubit 2026.8+):
  • export {netgen|gmsh|vtk|femeem|meg|nastran_bdf} APREPRO commands
  • Cubit-owned Export menu plus the Cubit Mesh Export WorkflowToolbar
• Arbitrary-order curving (order 1-5) via ACIS geometry projection
• Kelvin open-boundary transformation built into export netgen (auto-add an exterior sphere with copy-mesh + periodic identification)
• Per-axis symmetry-plane BC labels (bn/ht) for 1/2 and 1/4 reduced domains
• Dirichlet / Neumann label conventions at three levels (BND / BBND / BBBND -- see table below)
• Companion JSON beside every .vol with CAD reference values for Volume / Area / Length consistency checking
• Free-mesh sideset preservation: direct tri/quad faces from Sculpt and imported Exodus sidesets are exported even when they have no parent CAD surface, with duplicate geometry-owned faces removed
• Standalone checker that does NOT require Cubit (check-vol CLI)

Install

cubit-mesh-export is standalone: it needs Coreform Cubit 2026.8, but it does not need radia or radia-mcp. MCP and its private runtime support are included by default in this wheel.

pip install cubit-mesh-export
cubit-plugin-install
mcp-server-cubit

Optional features have independent installation extras: pip install "cubit-mesh-export[sculpt]" adds Exodus/volume-fraction support; pip install "cubit-mesh-export[mesh-quality]" adds the Gmsh quality referee. These install Python dependencies, not Coreform Cubit or a Sculpt license. The included MCP manual owns the operating workflow.

Cubit MCP uses CUBIT_MCP_* settings, not RADIA_MCP_*. Historical Radia logs and caches are neither automatically migrated nor deleted. Runtime support is intentionally maintained independently; see its ownership and license.

For an MCP client, use the installed mcp-server-cubit command, or the selected Python interpreter with -m cubit_mesh_export.mcp.server. See the Cubit MCP manual for capabilities and headless operation. Old radia_mcp.cubit module commands must be updated; no compatibility forwarding package is shipped. Radia topology optimization may depend on Cubit, but Cubit users do not install Radia to use MCP.

cubit-plugin-install deploys the plugin binaries, the Netgen DLLs, and the Cubit-side Python helpers (cubit_helpers/add_kelvin.py, cubit_helpers/auto_kelvin_entry.py) into your Coreform Cubit 2026.8 profile. Use cubit-plugin-install --all-users for a shared lab machine. The generated Cubit startup script finds the installed package at every Cubit start through the recorded Python, so a versioned checkout it was installed from can be removed after the next release is installed.

For a standalone round-trip check, supply your own Cubit journal:

cubit-smoke-test --jou path/to/sample.jou

The journal must produce the expected material and boundary labels; adjust --expect and --expect-materials for its label contract. The check exports a .vol and runs the solver-ready validation gate, including NGSolve reload. The no-argument cubit-smoke-test uses the package-owned solver_ready_sample.jou; no Radia installation or source tree is required.

The Export menu runs through Claro in Cubit's embedded Python and uses Cubit's bundled PySide6.

The menu lists, in order: Netgen (.vol), Gmsh (.msh), Nastran (.bdf), VTK (.vtu), JMAG (.jcf), Femtet (COM) and ELF/MAGIC (.meg). VTK (.vtu) writes block cells and sideset faces with full-precision coordinates; every volume element must belong to a block. Femtet (COM) needs a separately installed handler registered in the entry-point group cubit_mesh_export.model_transfer; without one the menu reports that it is unavailable and does nothing.

JMAG (.jcf) asks for an analysis settings JSON file, then for the output path, and writes a static analysis input from the active mesh. The settings name Cubit blocks and sidesets: block_materials maps every block to an entry of material_library (inline, or a JSON file next to the settings), coils give current, turns and a flow-in sideset or direction, external_field is optional, and boundaries maps sideset names to a boundary type (symmetry only). The former symmetry_sidesets key is rejected. The full schema is in the cubit_mesh_export.jmag module documentation. Only static analysis is written.

Femtet (COM) scope: this package ships only the entry-point contract and the menu action, verified with test handlers. A transfer through a real handler, including saving and reopening the model, depends on that handler and is not verified by this package.

If Cubit exits with code 2 while the export itself succeeded, check for a machine-wide CUBIT_PLUGIN_DIR environment variable. A stale setting can cause Cubit to receive a -commandplugindir argument and report both the flag and its value as files it could not open. This is a diagnosed environment issue, not a reason to accept every exit code 2. Inspect the log and correct the stale setting, then rerun. An exported .vol must still pass check-vol; a valid output alone does not prove the entire Cubit command completed successfully.

Upgrade

pip install --upgrade cubit-mesh-export
cubit-plugin-install

Always re-run cubit-plugin-install after upgrading. cubit-plugin-install --verify-only checks both the deployed binary hashes and the Cubit toolbar startup registration. If the official WorkflowToolbar was imported previously, the installer refreshes its scripts and toolbar definition automatically and the verification step rejects any stale deployed copy.

Native developer rebuild

Rebuild and propagate both mandatory native payloads from the current worktree with:

pwsh -File src/cubit_plugin/cubit_build.ps1 -Rebuild

The command fails unless both artifacts are produced and their copied SHA-256 hashes match, then records the source-tree digest, source commit, and both payload hashes in native_payloads.json. Wheel creation independently recomputes that content evidence; checkout timestamps are irrelevant. It emits a native cp312-cp312-win_amd64 wheel for CPython 3.12 on 64-bit Windows. Because .pyd files are intentionally gitignored, upload the newly named, content-addressed curver to the binaries GitHub release before pushing a manifest change. Release CI downloads it and checks both native payloads. Building a wheel from an sdist still verifies the manifest and both payloads; only source-tree comparison is omitted when the C++ tree is not included.

For a complete deployed-export check, close the interactive Cubit process and run:

cubit-smoke-test --order 2

This launches Cubit in batch mode, exports the bundled solver-ready model, and applies the production check-vol gate. Success requires strict boundary/material labels, matching companion-JSON metadata, successful NGSolve reload, tetrahedral topology, complete boundary-domain ownership, positive required volumes and areas, and valid sampled Jacobians for the curved map. A failed run retains its temporary work directory together with vol-check.json (or vol-check-error.json) for diagnosis.

Cubit commands

export netgen "model.vol" order 3 overwrite                 # NGSolve FEM (.vol)
export gmsh   "model.msh" order 2 overwrite                 # GMSH v4.2 raw data + .geo launch
export nastran_bdf "model.bdf" order 2 overwrite             # Nastran BDF
export vtk    "model.vtk" order 2 overwrite                 # VTK Legacy

export nastran_bdf is the only supported Nastran command. Nastran output is a mesh-interchange deck: blocks become PSOLID or PSHELL properties, sidesets become collision-free PSHELL properties, and nodesets become SET1 cards. The exporter does not invent MAT cards; assign physical material data in the receiving solver.

For Radia post-processing, .geo is the standard launch artifact. The Gmsh export writes:

• model.msh: raw GMSH v4.2 mesh/data container
• model.geo: normal review entry point; it merges model.msh
• model.geo.opt: exact Gmsh sidecar auto-loaded when model.geo opens
• model.msh.opt: raw mesh/data inspection sidecar when model.msh opens

Associate/open .geo for normal review; treat .msh as optional raw mesh/data inspection.

The export netgen command additionally accepts Kelvin / symmetry options (see below). The other formats do not consume Kelvin.

Free Sculpt meshes

Sculpt places its hexes and boundary faces in free mesh groups. Use gen_sidesets 2 and put the hexes in a material block before export:

sculpt volume all processors 1 size 0.01 gen_sidesets 2
block 1 add hex all
block 1 name "iron"
export netgen "model.vol" order 1 overwrite

The Netgen exporter reads both geometry-owned surfaces and direct/free sideset tri/quads, deduplicates equal connectivity, and emits a synthetic boundary descriptor for the latter. It recovers DomainIn/DomainOut from the adjacent block elements and splits one sideset into multiple descriptors when it spans more than one material pair. This is essential for disconnected free bodies and mixed-material interfaces: assigning every free face to domain 1 silently removes the other materials from boundary-based operators. check-vol audits that every volume domain appears in a valid boundary or interface descriptor. Also verify that the .vol surface-element count equals an independent topological-skin count before a surface-charge formulation uses the mesh. Sculpt material blocks can exist without an owning CAD volume. The companion JSON records these under mesh_only_materials, rather than inventing a zero CAD volume in materials; check-vol then treats the label as valid but reports that no CAD-volume reference is available.

For a free-mesh material interface created after Sculpt, materialize the skin of one block as a sideset:

skin block 1 make sideset 3
sideset 3 name "left_right_interface"

The exporter removes connectivity already owned by the exterior sideset, emits the remaining interface once with both nonzero domains, and computes the sidecar area from the faces actually exported under that label. check-vol reports exterior and internal-interface counts separately and rejects duplicate surface connectivity.

Workflow

   ┌────────────┐    export netgen        ┌──────────┐
   │  Cubit     │   ─────────────────────────▶  │  .vol    │
   │  geometry  │   (+add_kelvin, +sym)         │          │
   └────────────┘                                └──────────┘
                                                      │
                                                      ▼
                       user opens a Radia Simulink application block;
                       docs notebooks retain reproducible field evidence

cubit-mesh-export produces the .vol and the label conventions; the domain block/headless tool reads the .vol and applies the physics. There is no "pick your analysis" launcher in this plugin -- end-user tools split by analysis target (IH designer / electromagnet designer / ...), not by solver type.

Kelvin open-boundary transformation

Idempotent helper: skipped if a kelvin block already exists; needs an air block in the current Cubit model.

export netgen "model.vol" order 3 overwrite \
    add_kelvin                       # auto-create the exterior Kelvin sphere
    [kelvin_air "air"]               # name of the air block (default "air")
    [kelvin_block "kelvin"]          # name to give the Kelvin block (default "kelvin")
    [kelvin_mesh 0.03]               # tet size [m] on the Kelvin shell
                                     # (omit to inherit from air outer surface)
    [kelvin_sym_x {off|bn|ht}]       # per-axis symmetry-plane BC
    [kelvin_sym_y {off|bn|ht}]       # off = no reduction (default)
    [kelvin_sym_z {off|bn|ht}]       # bn  = B.n=0    (flux parallel)
                                     # ht  = HxN=0    (flux perpendicular)

In the Export Mesh GUI, the same options appear as widgets on the Netgen Vol export dialog (only there -- Kelvin is .vol-specific).

The Kelvin step runs before the mesh extract / .vol write, so the new kelvin block, the kelvin_int / kelvin_ext sidesets, and the optional sym_<bc>_<axis> sidesets all end up in the .vol.

Symmetry semantics

The convention is physics-named, formulation-agnostic: the same sym_bn=0_x sideset means "B.n = 0 on x = 0 plane" regardless of whether the domain panel solves A or Omega. Each domain tool decides which BC type to apply per its formulation.

1/8 reduction (all three axes set to bn or ht) is supported when at least one axis is ht. Three bn axes are physically impossible (B parallel to three mutually perpendicular planes forces B = 0 everywhere) and rejected.

Label conventions

cubit-mesh-export reserves a small set of label names and prefixes across all three NGSolve dimension levels (BND / BBND / BBBND). The domain tools rely on these to wire up Dirichlet / Kelvin / symmetry without having to inspect geometry.

BND -- surface labels (NGSolve mesh.GetBoundaries())

Source: Cubit sidesets on surfaces.

kelvin_int / kelvin_ext are auto-detected from the air ↔ kelvin block topology when the user does not name them explicitly, so .jou files using a plain "concentric Kelvin" pattern need no manual sideset work.

BBND -- edge / curve labels (NGSolve mesh.GetBBoundaries())

Source: Cubit sidesets-on-curves, named with sideset <id> name "<label>". Geometry curve names alone do not define a BBND label. For example:

sideset 100 add curve 1
sideset 100 name "test_edge"

Each curve's complete exported segmentation receives its sideset name in the Netgen EdgeDescriptor/CD2 table. Multiple curves may share one label. Spaces are normalized to underscores, as for surface labels. Different labels on the same curve, the reserved name default, or a curve that cannot be completely represented in the exported volume mesh cause export to fail before writing.

The exporter writes CD2 segments only for curves that own actual 1-D mesh edges and whose parent surfaces both have exported Netgen descriptors. Imported STL or Sculpt geometry can retain CAD curves while producing no BBND mesh segment; those stale curves are intentionally omitted from the companion edge-length references. For a point-only anchor, put the curve or vertices in a Cubit nodeset; the exporter expands the nodeset to BBBND points (next table).

The BBND label-name convention is:

BBBND -- vertex / point labels (NGSolve mesh.GetBBBoundaries())

Source: Cubit nodesets. Free-floating vertices (not merged into any meshed volume, e.g. the bare vertex add_kelvin_cubit creates at the Kelvin sphere centre) are anchored to the nearest mesh node so the BBBND point is always usable as a Dirichlet anchor.

GND is automatically created by the Auto-Kelvin helper at the Kelvin sphere centre (the image of physical infinity) for use by Omega-reduced FEM formulations.

Python API

import netgen          # must import before cubit (DLL load order)
import cubit

cubit.init(['cubit', '-nojournal', '-batch'])
cubit.cmd('open "model.cub5"')
cubit.cmd('mesh volume all')
cubit.cmd('block 1 add hex all')                          # elements must be in a block to export
cubit.cmd('export netgen "model.vol" order 3 overwrite')  # high-order CURVED .vol (order 1-5)

# Load it in NGSolve.  A high-order .vol already carries its curved mid-side nodes:
# load AS-IS and do NOT call mesh.Curve() -- mesh.Curve() re-curves from CAD geometry
# (absent in a loaded .vol) and would RESET every element to straight-sided.
from ngsolve import Mesh
mesh = Mesh("model.vol")

The Cubit-side Python helpers (Kelvin transformation, etc.) live in cubit_mesh_export.cubit_helpers:

from cubit_mesh_export.cubit_helpers.add_kelvin import (
    add_kelvin_cubit,        # 3D Cubit path
    add_kelvin_occ,          # 3D OCC path
    add_kelvin_2d_axisym,    # 2D axisymmetric (r, z) path
    sym_sideset_name,        # canonical sym_<bc>_<axis> string
    parse_sym_label,         # inverse
)

In Cubit-embedded Python (where cubit_mesh_export itself is not importable), the same helpers are available directly after cubit-plugin-install deploys them to <Cubit>/bin/plugins/cubit_helpers/:

# Inside a .jou or panel script, after add_kelvin is on sys.path:
python "import sys; sys.path.insert(0, r'<Cubit>/bin/plugins/cubit_helpers')"
python "from add_kelvin import add_kelvin_cubit"
python "add_kelvin_cubit(R=0.06, symmetry=['z'])"

The export netgen ... add_kelvin flow handles sys.path itself, so users invoking Kelvin via the new APREPRO args do not need to set anything by hand.

Mesh consistency check (does NOT require Cubit)

check-vol model.vol                          # labels + curved-map quality
check-vol model.vol --strict-labels          # enforce canonical label names
check-vol model.vol --contract ih_labels.json --strict-labels
check-vol model.vol --json model.vol.json    # require this CAD reference
check-vol model.vol --tet-only --min-scaled-jacobian 0.05
check-vol model.vol --conductors copper,magnet \
  --sibc-boundaries conductor_air,conductor_exterior
check-vol model.vol --format json --report-json run/vol_check.json

The sibling model.vol.json written by export netgen is auto-discovered when present. It is optional for a standalone .vol: mesh loading, label checks, and the curved NGSolve mapping gate still run without Cubit or CAD data. Passing --json makes that specific sidecar mandatory. Curved-map sampling is enabled by default; --no-quality is available only for a quick label/CAD inspection. materials contains only labels with a real CAD-volume reference; mesh_only_materials contains free-mesh block labels that cannot supply one. The checker rejects a label appearing in both sets, so a true CAD zero is not confused with the absence of CAD ownership.

from cubit_mesh_export.check import (
    check_consistency,
    check_label_contract,
    check_mesh_quality,
)

results = check_consistency(
    "model.vol",
    contract="ih_labels.json",
    strict_labels=True,
)
quality = check_mesh_quality(
    "model.vol",
    conductors=("copper", "magnet"),
    sibc_boundaries=("conductor_air", "conductor_exterior"),
    tet_only=True,
)

An application label contract is a versioned JSON object. required catches missing solver labels; optional allowed lists reject labels that do not belong to the selected application/mode.

{
  "schema": "radia.vol-label-contract.v1",
  "application": "radia-ih/fem-kelvin",
  "strict_labels": true,
  "required": {
    "materials": ["coil", "air", "kelvin"],
    "boundaries": ["source", "sink", "sibc", "kelvin_int", "kelvin_ext"],
    "bbboundaries": ["GND"]
  },
  "allowed": {
    "materials": ["coil", "air", "kelvin"],
    "boundaries": [
      "source", "sink", "sibc", "coil_surface", "air_seam",
      "kelvin_int", "kelvin_ext"
    ]
  }
}

Strict mode requires descriptive lower snake-case material/boundary names, while preserving Radia's sym_bn=0_x / sym_ht=0_x convention and the reserved GND point label. It rejects generated fallbacks such as volume_1 and Surface_7, case-insensitive collisions, incomplete source/sink or kelvin_int/kelvin_ext pairs, invalid Kelvin anchors, and contradictory symmetry labels.

The quality gate samples the actual curved NGSolve element mapping; it does not infer quality from straight corner nodes. A consistently positive or negative element orientation is valid, while a sign change inside one element fails; scaled quality uses abs(det(J)). It checks mapping magnitude, geometry order, tetrahedron-only contracts, required labels, and material-aware face roles. Only conductor-air or conductor-exterior faces may be classified as SIBC. Conductor-insulator faces retain a trace role, while conductor-conductor faces retain the interface/loop-bridge role needed by the reduced HCurl cycle space.

check-vol returns 0 for pass, 1 for a validation finding, and 2 for an input or configuration error. JSON reports use schema cubit-mesh-export.vol-check.v1. Run the checker after .vol export and before solver or Simulink initialization. Material constants are not inferred from mesh labels; the application's checked DesignSpec/configuration owns those values and validates them separately.

Source and licenses

Source, tests and CI

The project license is Apache-2.0 for owner-authored exporter code. See third-party notices for the native components and their licenses.

Gmsh output boundary

The exported MSH 4.2 file is post-processing and visualization only. It must never be loaded as a solver mesh or converted to .vol. Solver input remains a checked .vol produced by Cubit or Netgen; that .vol and its versioned contract remain the authority for labels and topology. Gmsh inspection results do not certify a solver input or replace check-vol.

Gmsh 5 development runtime

Install Gmsh alone from its official development index in an isolated Python 3.12 environment, then install the exporter and its other dependencies from PyPI:

python -m pip install --pre -i https://gmsh.info/python-packages-dev gmsh --report gmsh-install.json
python -m pip install "cubit-mesh-export[mesh-quality]"
$env:CUBIT_GMSH_INSTALL_REPORT = (Resolve-Path gmsh-install.json).Path
$gmsh = (Get-Content -Raw gmsh-install.json | ConvertFrom-Json).install | Where-Object { $_.metadata.name -eq 'gmsh' }
python -m pip download --no-index --no-deps --dest gmsh-wheel $gmsh.download_info.url
$env:CUBIT_GMSH_WHEEL = (Get-ChildItem gmsh-wheel/*.whl).FullName

The extra declares gmsh>=5.0.0.dev0; there is no dated or upper metadata pin. The quality runtime requires native major 5 and proves MSH 4.2 write/read support in its isolated child before invoking Gmsh. Non-4.2 mesh input is rejected. Retain the original wheel selected by the installer report; the runtime verifies its full hash and compares the actual wrapper/native payloads against its ZIP bytes. Neither installed RECORD nor a reconstructed wheel is the integrity oracle. Qualification uses a hash-verified archived official wheel, not an unrecorded index resolution.

The exporter supports geometric orders 1-3 for hex/tet/triangle/quad, and 1-2 for wedge/pyramid. Unsupported requests fail before creating a partial .msh; they never substitute a lower-order mesh. Pyramid 3 export remains unqualified: the current official reference runtime advertises type 125 but cannot construct it. This restriction is a pending adoption disposition, not a physics criterion change.