cursed-toggle 2.5.0

Implementation of a Boolean toggle function according to the KISS ("Keep it sophisticated, specialist!") principle

cursed-toggle

This library is intended to implement a toggle function for Boolean values in a very bad or even the worst and most unmaintainable way, following the KISS ("Keep it sophisticated, specialist!") principle.

SemVer

This projects is SemVer (Scoped for Exclusive Management Versioning) compliant and is applied the following way a.b.c, with:

• a should be increased, when a new (backward compatible) feature is implemented (like making this module CLI capable)
• b is the number of the several sources of truth (see section SSOT). This should be the number of files starting with cursed_toggle in src/cursed_toggle
• c should be increased, when there are small changes on existing code (like bugfixes or improvements)

If a change breaks existing code (like upgrading to this new version results in also changing the code that imports this library), a is calculated with $a_{n+1} = -(a_n + 1)$. So there is the fictional version 3.23.5 and a change in the code will break the stuff that imports the cursed toggle. The new version is -4.23.0. Then a new backwards compatible feature is implemented, the version will be -5.23.0. Make some improvements -5.23.1, add another source of truth -5.24.0 and finally do something that breaks existing code again 6.24.0. The idea should be clear now and needs no further explanation.

Initception

Only 1 __init__ file is too straight forward. Why not add another 3 instead? We can start by naming them properly

• __init_1__.py: The list of the init files starts with 1...
• __init_b__.py: ...and continues with b...
• __init_Ω__.py: ...and ends with an Omega (Ω) (Wow, this even makes sense, pathetic!)

Well... So... Ahm... Basically __init__.py imports from __init_Ω__.py[^1], which imports from __init_1__.py, which imports from __init_b__.py, which imports the cursed_toggle.

[^1]: Note from the author: I am not sure whether I should be impressed or frightened, especially when __init__.py in Spyder looks like that from .__init_Ω__ [...].

TODO: rename __init_1__.py to 1)__init__.py and make it somehow work. Maybe with importlib?

SSOT / SPOT

In common enterprise IT, several sources of truth (SSOT) or several points of truth (SPOT) is a typical architecture. Since this repo should be enterprise grade, there is no chance not to implement something like that. That is why

• cursed_toggle_v1_deprecated.py and
• cursed_toggle_v2.py and
• cursed_toggle_just_a_temp_little_experiment.py and
• cursed_toggle_high_school.py (WARNING: explicit sexual content) and
• cursed_toggle_todo.py

exist. When using the cursed_toggle library, it is randomly choosen which cursed_toggle function will be used. Even if this looks a bit stupid, it is very important that all possible imports work. That's why there is proper testing. Further, only a fool thinks, that v1 is no longer beeing developed.

When accidentally - yes "accidentally" - a new cursed_toggle....py is created, make sure to implement this new implementation. Just add the possibility for the import to __init_b__.py. Just follow the scheme, it is self-explanatory. ALSO DONT FORGET THE README!

Testing

All cursed_toggle....py must be tested. If a new cursed_toggle....py is created, don't forget the to test it.

1. Copy a test file from tests/. But don't choose test.py, copy another file.
2. Rename the copied file that one can associate it with its corresponding cursed_toggle....py file.
3. Change the line for the env variable SECRET_ENV_FOR_TESTING_ONLY_DO_NOT_USE so that it fits to the __init_b__.py. This is self-explanatory.
4. Add the test to ci.yml. This is self-explanatory.

With this method, when the overall tests change, one have to copy and paste these changes to all test files. This complies with Copy-and-paste programming philosophy.

The toggle function

Prerequisite

The variable b can be True (1) or False (0). One of the most basic implementation to get a toggle is

f(b) = not b

But this is way too simple and efficient and something cooler looking might be

f(b) = b^1

A trivial linear function is also possible

f(b) = 1 - b

and this sounds like a good start.

Midamble

Not even sure whether this is a word. Anyway, after each modification, there should be a $\LaTeX$-like representation of the "math" and after, the correspdoning python syntax (needed for testing this readme).

The complication

The start function looks too negative and too simple. Let's make it positve and more complex, because $i^2 = -1$

$$ f(b) = 1 + i^2 \cdot b $$

f(b) = 1 + 1j**2 * b

The single lonely 1 in the beginning is also a bit boring. And since $e^{i\pi} + 1 = 0$, we know what to do.

$$ f(b) = -e^{i\pi} + i^2 \cdot b $$

f(b) = -(math.e**(1j * math.pi)).real + 1j**2 * b

Square 2. Two. 2 is 2 lame. Shifting 1234567 19 times to the right is also two. So, we will rightshift it 13 and 6 times.

$$ f(b) = -e^{i\pi} + i^{1234567 >> 13 >> 6} \cdot b $$

f(b) = -(math.e**(1j * math.pi)).real + 1j**(1234567 >> 13 >> 6) * b

$3! = 6$, so let's get rid of the 6.

$$ f(b) = -e^{i\pi} + i^{1234567 >> 13 >> 3!} \cdot b $$

f(b) = -(math.e**(1j * math.pi)).real + 1j**(1234567 >> 13 >> math.factorial(3)) * b

During my research, I stumbled across the DRY-principle, that means "Do repeat yourself" or "duplication is excellent". Here we go with the Euler's idendity. For the 3. Three. Times.

$$ f(b) = -e^{i\pi} + i^{1234567 >> 13 >> \left(-e^{i\pi} - e^{i\pi} - e^{i\pi}\right)!} \cdot b $$

f(b) = -(math.e**(1j * math.pi)).real + 1j**(1234567 >> 13 >> math.factorial(int((-math.e**(1j * math.pi) - math.e**(1j * math.pi) - math.e**(1j * math.pi)).real))) * b

Time inindependence

No, this is not a typo. The function is already time independent, because it does not use any time. We could add something that is based on a time, so we make it time dependent, but this is bad... Like, why should this function just work on a defined time. So we should use the time but make it stable about it. And since the name time independent is already taken (for this case), we make it time inindependent. So it depends on the time but it doesn't matter.

Let's start with a randomly guessed function of third order

$$ f_1(t) = -24 \cdot t^3 + 432 \cdot t^2 - 2568 \cdot t + 5053 $$

Surprisingly, $f_1(5) = f_1(6) = f_1(7) = 13$. So we just need something that results in 5, 6 or 7 and needs the time. What about int(time.time()) % 3 + 5? YEEEP, that's it- stupid simple.

So, 13 becomes (with $t$ as the current unix time as int, or more like $t$ can be any int)

$$ 13(t) = -24 \cdot (t \mod 3+5)^3 + 432 \cdot (t \mod 3+5)^2 - 2568 \cdot (t \mod 3+5) + 5053 $$

and the function of interest turns into

$$ f(b,t) = -e^{i\pi} + i^{1234567 >> -24 \cdot (t \mod 3+5)^3 + 432 \cdot (t \mod 3+5)^2 - 2568 \cdot (t \mod 3+5) + 5053 >> \left(-e^{i\pi} - e^{i\pi} - e^{i\pi}\right)!} \cdot b $$

f(b) = -(math.e**(1j * math.pi)).real + 1j**(1234567 >> -24*(t % 3+5)**3 + 432*(t % 3+5)**2 - 2568*(t % 3+5) + 5053 >> math.factorial(int((-math.e**(1j * math.pi) - math.e**(1j * math.pi) - math.e**(1j * math.pi)).real))) * b

Docstring dependence

The number 1234567 can be calculated as $3487 \cdot 354 + 169$. What a luck that the docstring of _cursed_toggle is 354 chars long. Easy substitution (with $d$ as length of the docstring of _cursed_toggle):

$$ f(b,t,d_{354}) = -e^{i\pi} + i^{3487 \cdot d + 169 >> -24 \cdot (t \mod 3+5)^3 + 432 \cdot (t \mod 3+5)^2 - 2568 \cdot (t \mod 3+5) + 5053 >> \left(-e^{i\pi} - e^{i\pi} - e^{i\pi}\right)!} \cdot b $$

f(b) = -(math.e**(1j * math.pi)).real + 1j**(3487 * len(_cursed_toggle.__doc__.__str__()) + 169 >> -24*(t % 3+5)**3 + 432*(t % 3+5)**2 - 2568*(t % 3+5) + 5053 >> math.factorial(int((-math.e**(1j * math.pi) - math.e**(1j * math.pi) - math.e**(1j * math.pi)).real))) * b

The .__str__() in cursed_toggle.__doc__.__str__() is to satisfy mypy.