dar-backup 0.6.16

A script to do full, differential and incremental backups using dar. Some files are restored from the backups during verification, after which par2 redundancy files are created. The script also has a cleanup feature to remove old backups and par2 files.

Full, differential or incremental backups using 'dar'

The wonderful 'dar' Disk Archiver is used for the heavy lifting, together with the par2 suite in these scripts.

This is the Python based version 2 of dar-backup.

Table of Contents

• Full, differential or incremental backups using 'dar'
• My use case
• License
• Status
  • Breaking change in version 0.6.0
• Homepage - Github
• Requirements
• Principles
• How to run
  • 1 - installation
  • 2 - configuration
  • 3 - generate catalog databases
  • 4 - do FULL backups
  • 5 - deactivate venv
• Config
  • Config file
  • .darrc
  • Backup definition
• Systemd examples
  • Service: dar-back --incremental-backup
  • Timer: dar-back --incremental-backup
• List contents of an archive
• dar file selection examples
  • Select a directory
  • Select file dates in the directory
  • Exclude .xmp files from that date
• Restoring
  • Default location for restores
  • --restore-dir option
  • A single file
  • A directory
  • .NEF from a specific date
  • Restore test fails with exit code 4
  • Restore test fails with exit code 5
• Par2
  • Par2 to verify/repair
  • Par2 create redundancy files
• Points of interest
  • Merge FULL with DIFF, creating new FULL
  • dar manager databases
  • Performance tip due to par2
  • .darrc sets -vd -vf (since v0.6.4)
  • Separate log file for command output
• Todo
• Reference
  • dar-backup
  • manager
  • cleanup
  • clean-log
  • installer

My use case

I have cloud storage mounted on a directory within my home dir. The filesystem is FUSE based, which gives it a few special features

• a non-privileged user can perform a mount
• a privileged user cannot look into the filesystem --> a backup script running as root is not suitable

I needed the following:

• Backup my cloud storage to something local (cloud is convenient, but I want control over my backups)
• Backup primarily photos, video and different types of documents
• Have a simple non-complicated way of restoring, possibly years into the future. 'dar' fits that scenario with a single statically linked binary (kept with the archives). There is no need install/configure anything - restoring is simple and works well.
• During backup archives must be tested and a restore test (however small) performed
• Archives stored on a server with a reliable file system (easy to mount a directory over sshfs)
• Easy to verify archive's integrity, after being moved around.

I do not need the encryption features of dar, as all storage is already encrypted.

License

These scripts are licensed under the GPLv3 license. Read more here: GNU CPL 3.0, or have a look at the "LICENSE" file in this repository.

Status

As of August 8, 2024 I am using the alpha versions of dar-backup (alpha-0.5.9 onwards) in my automated backup routine.

As of February 13, 2025, I have changed the status from alpha --> beta, as the featureset is in place and the alphas have worked well for a very long time.

Breaking change in version 0.6.0

Version 0.6.0 and forwards requires the config variable COMMAND_TIMEOUT_SECS in the config file.

Homepage - Github

'dar-backup' package lives here: Github - dar-backup

This python version is v2 of dar-backup, v1 is made in bash.

Requirements

• dar
• par2
• python3

On Ubuntu, install the requirements this way:

    sudo apt install dar par2 python3

dar-backup principles

dar-backup

dar-backup is built in a way that emphasizes getting backups. It loops over the backup definitions, and in the event of a failure while backing up a backup definition, dar-backup shall log an error and start working on the next backup definition.

There are 3 levels of backups, FULL, DIFF and INCR.

• The author does a FULL yearly backup once a year. This includes all files in all directories as defined in the backup definition(s).
• The author makes a DIFF once a month. The DIFF backs up new and changed files compared to the FULL backup.
• The author takes an INCR backup every 3 days. An INCR backup includes new and changed files compared to the DIFF backup. -- So, a set of INCR's will contain duplicates (this might change as I become more used to use the catalog databases) -- No INCR backups will taken until a DIFF backup has been taken.

cleanup

The cleanup application deletes DIFF and INCR if the archives are older than the thresholds set up in the configuration file.

cleanup will only remove FULL archives if the option --cleanup-specific-archives is used. It requires the user to confirm deletion of FULL archives.

How to run

1 - installation

Installation is currently in a venv. These commands are installed in the venv:

• dar-back
• cleanup
• manager
• clean-log
• installer

Note:

The module inputimeout is installed into the venv and used for the confirmation input (with a 30 second timeout)

To install, create a venv and run pip:

mkdir $HOME/tmp
cd $HOME/tmp
python3 -m venv venv    # create the virtual environment 
. venv/bin/activate     # activate the virtual env
pip install dar-backup  # run pip to install `dar-backup`

I have an alias in ~/.bashrc pointing to my venv:

alias db=". ~/tmp/venv/bin/activate; dar-backup -v"

Typing db at the command line gives this

(venv) user@machine:~$ db
dar-backup 0.6.12
dar-backup.py source code is here: https://github.com/per2jensen/dar-backup
Licensed under GNU GENERAL PUBLIC LICENSE v3, see the supplied file "LICENSE" for details.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW, not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See section 15 and section 16 in the supplied "LICENSE" file.

2 - configuration

The dar-backup installer is non-destructive and stops if some of the default directories exist.

Run the installer

installer --install

The output is

Directories created: `/home/user/dar-backup/` and `/home/user/.config/dar-backup`
Config file deployed to /home/user/.config/dar-backup/dar-backup.conf
Default backup definition deployed to /home/user/.config/dar-backup/backup.d/default
1. Now run `manager --create-db` to create the catalog database.
2. Then you can run `dar-backup --full-backup` to create a backup.
3. List backups with `dar-backup --list`
4. List contents of a backup with `dar-backup --list-contents <backup-name>`

3 - generate catalog databases

Generate the archive catalog database(s).

dar-backup expects the catalog databases to be in place, it does not automatically create them (by design)

manager --create-db

4 - do FULL backups

Prereq: Backup definitions are in place in BACKUP.D_DIR (see config file)

You are ready to do backups of all your backup definitions.

dar-backup --full-backup 

If you want to see dar-backup's log entries in the terminal, use the --log-stdout option. This can be useful if dar-backup is started by systemd.

If you want more log messages, use the --verbose or --log-level debug for even more.

If you want a backup of a single definition, use the -d <backup definition> option. The definition's name is the filename of the definition in the backup.d config directory.

dar-backup --full-backup -d <your backup definition>

5 - deactivate venv

Deactivate the virtual environment (venv)

deactivate

Config

Config file

The configuration file's default location is: ~/.config/dar-backup/dar-backup.conf

If you have your config file somewhere else, use the --config option to point to it.

Tilde ~ and environment variables can be used in the paths for various file locations.

[MISC]
LOGFILE_LOCATION=~/.dar-backup.log
MAX_SIZE_VERIFICATION_MB = 20
MIN_SIZE_VERIFICATION_MB = 1
NO_FILES_VERIFICATION = 5
# timeout in seconds for backup, test, restore and par2 operations
# The author has such `dar` tasks running for 10-15 hours on the yearly backups, so a value of 24 hours is used.
# If a timeout is not specified when using the util.run_command(), a default timeout of 30 secs is used.
COMMAND_TIMEOUT_SECS = 86400

[DIRECTORIES]
BACKUP_DIR = /some/where/dar-backup/backups/
BACKUP.D_DIR = /some/where/dar-backup/backup.d
TEST_RESTORE_DIR = /tmp/dar-backup/restore/

[AGE]
# age settings are in days
DIFF_AGE = 100
INCR_AGE = 40

[PAR2]
ERROR_CORRECTION_PERCENT = 5
ENABLED = True

# scripts to run before the backup to setup the environment
[PREREQ]
SCRIPT_1 = ls -l /tmp
#SCRIPT_2 = another_script.sh

[POSTREQ]
SCRIPT_1 = df -h
#SCRIPT_2 = another_script.sh

.darrc

The package includes a default .darrc file which configures dar.

You can override the default .darrc using the --darrc option.

The default .darrc contents are as follows:

#  .darrc configuration file for `dar` as used by the `dar-backup` script.
#  `dar-backup` lives here: https://github.com/per2jensen/dar-backup


##############################################################

#  target: verbose

#  remove comments belov for dar being more verbose

verbose:

# shows files teated due to filtering inclusion or no filtering at all

# -vt

# shows skipped files du to exclusion

# -vs

# shows diretory currently being processed
# dar-backup logs `dar` stdout in real time, so directories being processed are now shown in the log file.
# this is quite useful in long running jobs
 -vd 

# shows detailed messages, not related to files and directories
# -vm

# shows summary of each treated directory, including average compression
# dar-backup logs `dar` stdout in real time, so directories being processed are now shown in the log file.
# this is quite useful in long running jobs
 -vf

# equivalent to "-vm -vs -vt"
# -va


restore-options:
# don't restore File Specific Attributes
#--fsa-scope none

# ignore owner, useful when used by a non-privileged user
--comparison-field=ignore-owner


# Exclude specific file types from compression
compress-exclusion:

# First setting case insensitive mode on:
-an
-ag

-Z    "*.gz"
-Z    "*.bz2"
-Z    "*.xz"
-Z    "*.zip"
-Z    "*.rar"
-Z    "*.7z"
-Z    "*.tar"
-Z    "*.tgz"
-Z    "*.tbz2"
-Z    "*.txz"
# Exclude common image file types from compression
-Z    "*.jpg"
-Z    "*.jpeg"
-Z    "*.png"
-Z    "*.gif"
-Z    "*.bmp"
-Z    "*.tiff"
-Z    "*.svg"
-Z    "*.ico"
-Z    "*.webp"
# The author uses Nikon compressed NEFs raw files
-Z    "*.NEF"
# Exclude common movie file types from compression
-Z    "*.mp4"
-Z    "*.avi"
-Z    "*.mkv"
-Z    "*.mov"
-Z    "*.wmv"
-Z    "*.flv"
-Z    "*.mpeg"
-Z    "*.mpg"

# These are zip files. Not all are compressed, but considering that they can
# get quite large it is probably more prudent to leave this uncommented.
-Z    "*.pk3"
-Z    "*.zip"

-Z    "*.lz4"
-Z    "*.zoo"

-Z    "*.Po"
-Z    "*.aar"
-Z    "*.bx"
-Z    "*.chm"
-Z    "*.doc"
-Z    "*.epub"
-Z    "*.f3d"
-Z    "*.gpg"
-Z    "*.htmlz"
-Z    "*.iix"
-Z    "*.iso"
-Z    "*.jin"
-Z    "*.ods"
-Z    "*.odt"
-Z    "*.ser"
-Z    "*.svgz"
-Z    "*.swx"
-Z    "*.sxi"
-Z    "*.whl"
-Z    "*.wings"


# Dar archives (may be compressed).
-Z    "*.dar"

# Now we swap back to case sensitive mode for masks which is the default
#mode:
-acase

Backup definition example

This piece of configuration is a backup definition. It is placed in the BACKUP.D_DIR (see config file description). The name of the file is the name of the backup definition.

You can use as many backup definitions as you need.

 # Switch to ordered selection mode, which means that the following
 # options will be considered top to bottom
 -am

# Backup Root Dir
# This is the top directory, where the backups start.
#Directories mentioned below, are relative to the Root Dir.
 -R /home/user/

# Directories to backup below the Root dir
# uncomment the next line to backup only the Documents directory
# -g Documents

# Directories to exclude below the Root dir
 -P mnt
 -P tmp
 -P .cache
 -P .config/Code/CachedData
 
# compression level
 -z5

# no overwrite, if you rerun a backup, 'dar' halts and asks what to do
# due to the -Q option given to `dar`, the program will terminate and give en error.
 -n
 
# size of each slice in the archive
 --slice 7G

# bypass directores marked as cache directories
# http://dar.linux.free.fr/doc/Features.html
--cache-directory-tagging

Systemctl examples

I have dar-backup scheduled to run via systemd --user settings.

The files are located in: ~/.config/systemd/user

Once the .service and .timer files are in place, timers must be enabled and started.

systemctl --user enable dar-inc-backup.timer
systemctl --user start  dar-inc-backup.timer
systemctl --user daemon-reload

Verify your timers are set up as you want:

systemctl --user list-timers

Service: dar-backup --incremental-backup

File: dar-inc-backup.service

[Unit]
Description=dar-backup INC
StartLimitIntervalSec=120
StartLimitBurst=1
[Service]
Type=oneshot
TimeoutSec=infinity
RemainAfterExit=no
ExecStart=/bin/bash -c '. /home/user/programmer/dar-backup.py/venv/bin/activate && dar-backup --incremental-backup --verbose'

Timer: dar-backup --incremental-backup

File: dar-inc-backup.timer

[Unit]
Description=dar-backup INC timer

[Timer]
OnCalendar=*-*-04/3 19:03:00
Persistent=true

[Install]
WantedBy=timers.target

list contents of an archive

. <the virtual evn>/bin/activate
dar-backup --list-contents example_FULL_2024-06-23 --selection "-X '*.xmp' -I '*2024-06-16*' -g home/pj/tmp/LUT-play"
deactivate

gives

[Data ][D][ EA  ][FSA][Compr][S]| Permission | User  | Group | Size    |          Date                 |    filename
--------------------------------+------------+-------+-------+---------+-------------------------------+------------
[Saved][-]       [-L-][   0%][ ]  drwxr-xr-x   root   root    113 Mio   Sat May 11 16:16:48 2024        home
[Saved][-]       [-L-][   0%][ ]  drwxrwxr-x   pj     pj      113 Mio   Sun Jun 23 10:46:30 2024        home/pj
[Saved][-]       [-L-][   0%][ ]  drwxrwxr-x   pj     pj      113 Mio   Sun Jun 23 09:17:42 2024        home/pj/tmp
[Saved][-]       [-L-][   1%][ ]  drwxrwxr-x   pj     pj      50 Mio    Wed Jun 19 20:52:13 2024        home/pj/tmp/LUT-play
[Saved][ ]       [-L-][   0%][X]  -rw-rw-r--   pj     pj      49 Mio    Sun Jun 16 12:52:22 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15.NEF

dar file selection examples

select a directory

dar -l /tmp/example_FULL_2024-06-23  -g home/pj/tmp/LUT-play

gives

[Data ][D][ EA  ][FSA][Compr][S]| Permission | User  | Group | Size    |          Date                 |    filename
--------------------------------+------------+-------+-------+---------+-------------------------------+------------
[Saved][-]       [-L-][   0%][ ]  drwxr-xr-x   root   root    113 Mio   Sat May 11 16:16:48 2024        home
[Saved][-]       [-L-][   0%][ ]  drwxrwxr-x   pj     pj      113 Mio   Sun Jun 23 10:46:30 2024        home/pj
[Saved][-]       [-L-][   0%][ ]  drwxrwxr-x   pj     pj      113 Mio   Sun Jun 23 09:17:42 2024        home/pj/tmp
[Saved][-]       [-L-][   1%][ ]  drwxrwxr-x   pj     pj      50 Mio    Wed Jun 19 20:52:13 2024        home/pj/tmp/LUT-play
[Saved][ ]       [-L-][   0%][X]  -rw-rw-r--   pj     pj      49 Mio    Sun Jun 16 12:52:22 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15.NEF
[Saved][ ]       [-L-][  95%][ ]  -rw-rw-r--   pj     pj      48 kio    Sat Jun 22 21:51:24 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15.NEF.xmp
[Saved][ ]       [-L-][  95%][ ]  -rw-rw-r--   pj     pj      50 kio    Sat Jun 22 21:51:25 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_01.NEF.xmp
[Saved][ ]       [-L-][  95%][ ]  -rw-rw-r--   pj     pj      51 kio    Sat Jun 22 21:51:26 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_02.NEF.xmp
[Saved][ ]       [-L-][  95%][ ]  -rw-rw-r--   pj     pj      51 kio    Sat Jun 22 21:51:27 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_03.NEF.xmp
[Saved][ ]       [-L-][  95%][ ]  -rw-rw-r--   pj     pj      51 kio    Sat Jun 22 21:51:27 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_04.NEF.xmp
[Saved][ ]       [-L-][  97%][ ]  -rw-rw-r--   pj     pj      77 kio    Sat Jun 22 21:50:16 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_05.NEF.xmp
[Saved][ ]       [-L-][  95%][ ]  -rw-rw-r--   pj     pj      52 kio    Sat Jun 22 21:49:37 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_06.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:50:47 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_07.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:51:12 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_08.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:51:12 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_09.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:50:39 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_10.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:50:36 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_11.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:50:35 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_12.NEF.xmp
[Saved][ ]       [-L-][  88%][ ]  -rw-rw-r--   pj     pj      15 kio    Sat Jun 22 21:51:11 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_13.NEF.xmp
[Saved][ ]       [-L-][  96%][ ]  -rw-rw-r--   pj     pj      84 kio    Sat Jun 22 21:51:09 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_14.NEF.xmp
[Saved][ ]       [-L-][  96%][ ]  -rw-rw-r--   pj     pj      90 kio    Sat Jun 22 21:51:04 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_15.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:51:15 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_16.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:50:48 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_17.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:50:19 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_18.NEF.xmp

select file dates in the directory

dar -l /tmp/example_FULL_2024-06-23  -I '*2024-06-16*' -g home/pj/tmp/LUT-play

gives

[Data ][D][ EA  ][FSA][Compr][S]| Permission | User  | Group | Size    |          Date                 |    filename
--------------------------------+------------+-------+-------+---------+-------------------------------+------------
[Saved][-]       [-L-][   0%][ ] drwxr-xr-x   root    root    113 Mio   Sat May 11 16:16:48 2024        home
[Saved][-]       [-L-][   0%][ ]  drwxrwxr-x   pj     pj      113 Mio   Sun Jun 23 10:46:30 2024        home/pj
[Saved][-]       [-L-][   0%][ ]  drwxrwxr-x   pj     pj      113 Mio   Sun Jun 23 09:17:42 2024        home/pj/tmp
[Saved][-]       [-L-][   1%][ ]  drwxrwxr-x   pj     pj      50 Mio    Sed Jun 19 20:52:13 2024        home/pj/tmp/LUT-play
[Saved][ ]       [-L-][   0%][X]  -rw-rw-r--   pj     pj      49 Mio    Sun Jun 16 12:52:22 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15.NEF
[Saved][ ]       [-L-][  95%][ ]  -rw-rw-r--   pj     pj      48 kio    Sat Jun 22 21:51:24 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15.NEF.xmp
[Saved][ ]       [-L-][  95%][ ]  -rw-rw-r--   pj     pj      50 kio    Sat Jun 22 21:51:25 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_01.NEF.xmp
[Saved][ ]       [-L-][  95%][ ]  -rw-rw-r--   pj     pj      51 kio    Sat Jun 22 21:51:26 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_02.NEF.xmp
[Saved][ ]       [-L-][  95%][ ]  -rw-rw-r--   pj     pj      51 kio    Sat Jun 22 21:51:27 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_03.NEF.xmp
[Saved][ ]       [-L-][  95%][ ]  -rw-rw-r--   pj     pj      51 kio    Sat Jun 22 21:51:27 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_04.NEF.xmp
[Saved][ ]       [-L-][  97%][ ]  -rw-rw-r--   pj     pj      77 kio    Sat Jun 22 21:50:16 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_05.NEF.xmp
[Saved][ ]       [-L-][  95%][ ]  -rw-rw-r--   pj     pj      52 kio    Sat Jun 22 21:49:37 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_06.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:50:47 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_07.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:51:12 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_08.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:51:12 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_09.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:50:39 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_10.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:50:36 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_11.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:50:35 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_12.NEF.xmp
[Saved][ ]       [-L-][  88%][ ]  -rw-rw-r--   pj     pj      15 kio    Sat Jun 22 21:51:11 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_13.NEF.xmp
[Saved][ ]       [-L-][  96%][ ]  -rw-rw-r--   pj     pj      84 kio    Sat Jun 22 21:51:09 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_14.NEF.xmp
[Saved][ ]       [-L-][  96%][ ]  -rw-rw-r--   pj     pj      90 kio    Sat Jun 22 21:51:04 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_15.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:51:15 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_16.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:50:48 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_17.NEF.xmp
[Saved][ ]       [-L-][  92%][ ]  -rw-rw-r--   pj     pj      24 kio    Sat Jun 22 21:50:19 2024        home/pj/tmp/LUT-play/2024-06-16_12:52:22,15_18.NEF.xmp

exclude .xmp files from that date

dar -l /tmp/example_FULL_2024-06-23 -X '*.xmp' -I '*2024-06-16*' -g home/pj/tmp/LUT-play

gives

[Data ][D][ EA  ][FSA][Compr][S]| Permission | User  | Group | Size    |          Date                 |    filename
--------------------------------+------------+-------+-------+---------+-------------------------------+------------
[Saved][-]       [-L-][   0%][ ]  drwxr-xr-x   root   root    113 Mio   Sat May 11 16:16:48 2024        home
[Saved][-]       [-L-][   0%][ ]  drwxrwxr-x   pj     pj      113 Mio   Sun Jun 23 10:46:30 2024        ome/pj
[Saved][-]       [-L-][   0%][ ]  drwxrwxr-x   pj     pj      113 Mio   Sun Jun 23 09:17:42 2024        ome/pj/tmp
[Saved][-]       [-L-][   1%][ ]  drwxrwxr-x   pj     pj      50 Mio    Wed Jun 19 20:52:13 2024      ` ome/pj/tmp/LUT-play
[Saved][ ]       [-L-][   0%][X]  -rw-rw-r--   pj     pj      49 Mio    Sun Jun 16 12:52:22 2024      ` home/pj/tmp/LUT-play/2024-06-16_12:52:22,15.NEF

Restoring

default location for restores

dar-backup will use the TEST_RESTORE_DIR location as the Root for restores, if the --restore-dir option has not been supplied.

See example below to see where files are restored to.

--restore-dir option

When the --restore-dir option is used for restoring, a directory must be supplied.

The directory supplied functions as the Root of the restore operation.

Example:

A backup has been taken using this backup definition:

-R /
-g home/user/Documents

When restoring and using /tmp for --restore-dir, the restored files can be found in /tmp/home/user/Documents

a single file

. <the virtual env>/bin/activate
dar-backup --restore <archive_name> --selection "-g path/to/file"
deactivate

a directory

. <the virtual env>/bin/activate
dar-backup --restore <archive_name> --selection "-g path/to/directory"
deactivate

.NEF from a specific date

. <the virtual env>/bin/activate
dar-backup --restore <archive_name>  --selection "-X '*.xmp' -I '*2024-06-16*' -g home/pj/tmp/LUT-play"
deactivate

restore test fails with exit code 4

"dar" in newer versions emits a question about file ownership, which is "answered" with a "no" via the "-Q" option. That in turn leads to an error code 4.

Thus the dar option "--comparison-field=ignore-owner" has been placed in the supplied .darrc file (located in the virtual environment where dar-backup is installed).

This causes dar to restore without an error.

It is a good option when using dar as a non-privileged user.

restore test fails with exit code 5

If exit code 5 is emitted on the restore test, FSA (File System specific Attributes) could be the cause.

That (might) occur if you backup a file stored on one type of filesystem, and restore it on another type. My home directory is on a btrfs filesystem, while /tmp (for the restore test) is on zfs.

The restore test can result in an exit code 5, due to the different filesystems used. In order to avoid the errors, the "option "--fsa-scope none" can be used. That will restult in FSA's not being restored.

If you need to use this option, un-comment it in the .darrc file (located in the virtual environment where dar-backup is installed)

Par2

Par2 to verify/repair

You can run a par2 verification on an archive like this:

for file in <archive>*.dar.par2; do
  par2 verify "$file"
done

if there are problems with a slice, try to repair it like this:

  par2 repair <archive>.<slice number>.dar.par2

Par2 create redundancy files

If you have merged archives, you will need to create the .par2 redundency files manually. Here is an example

for file in <some-archive>_FULL_yyyy-mm-dd.*; do
  par2 c -r5 -n1 "$file"
done

where "c" is create, -r5 is 5% redundency and -n1 is 1 redundency file

Points of interest

Merge FULL with DIFF, creating new FULL

Over time, the DIFF archives become larger and larger. At some point one wishes to create a new FULL archive to do DIFF's on. One way to do that, is to let dar create a FULL archive from scratch, another is to merge a FULL archive with a DIFF, and from there do DIFF's until they once again gets too large for your taste.

I do backups of my homedir. Here it is shown how a FULL archive is merged with a DIFF, creating a new FULL archive.

dar --merge pj-homedir_FULL_2021-09-12  -A pj-homedir_FULL_2021-06-06  -@pj-homedir_DIFF_2021-08-29 -s 12G

# test the new FULL archive
dar -t pj-homedir_FULL_2021-09-12

# create Par2 redundancy files
for file in pj-homedir_FULL_yyyy-mm-dd.*.dar; do
  par2 c -r5 -n1 "$file"
done

dar manager databases

dar-backup now saves archive catalogs in dar catalog databases.

This makes it easier to restore to a given date when having many FULL, DIFF and INCR archives.

If the manager does not add an archive to it's catalog database, dar-backup will log an error and continue. The important part is verify the archive is usable and continue to other backup definitions.

Performance tip due to par2

This dar benchmark page has an interesting note on the slice size.

Slice size should be smaller than available RAM, apparently a large performance hit can be avoided keeping the par2 data in memory.

.darrc sets -vd -vf (since v0.6.4)

These .darrc settings make dar print the current directory being processed (-vd) and some stats after (-vf)

This is very useful in very long running jobs to get an indication that the backup is proceeding normally.

Separate log file for command output

Dar-backup's log file is called dar-backup.log.

In order to not clutter that log file with the output of commands being run, a new secondary log file has been introduced dar-backup-commands.log.

The secondary log file can get quite cluttered, if you want to remove the clutter, run the clean-logscript with the --file option, or simply delete it.

Todo

• installer to generate, but not deploy systemd units and timers for:

  • FULL, DIFF and INCR backups.
  • cleanup.

• Add option to dar-backup to use the dar option --fsa-scope none

Reference

dar-backup

This script is responsible for managing the backup creation and validation process. It supports the following options:

--full-backup                         Perform a full backup.
--differential-backup                 Perform a differential backup.
--incremental-backup                  Perform an incremental backup.
--backup-definition <name>            Specify the backup definition file.
--alternate-reference-archive <file>  Use a different archive for DIFF/INCR backups.
--config-file <path>                  Specify the path to the configuration file.
--darrc <path>                        Specify an optional path to .darrc.
--examples                            Show examples of using dar-backup.py.
--list                                List available backups.
--list-contents <archive>             List the contents of a specified archive.
--selection <params>                  Define file selection for listing/restoring.
--restore <archive>                   Restore a specified archive.
--restore-dir <path>                  Directory to restore files to.
--verbose                             Enable verbose output.
--suppress-dar-msg                    Filter out this from the darrc: "-vt", "-vs", "-vd", "-vf", "-va"
--log-level <level>                   `debug` or `trace`, default is `info`", default="info".
--log-stdout                          Also print log messages to stdout.
--do-not-compare                      Do not compare restores to file system.
--version                             Show version and license information.

manager

This script manages dar databases and catalogs. Available options include:

--create-db                           Create missing databases for all backup definitions.
--alternate-archive-dir <path>        Use this directory instead of BACKUP_DIR in the config file.
--add-dir <path>                      Add all archive catalogs in this directory to databases.
-d, --backup-def <name>               Restrict to work only on this backup definition.
--add-specific-archive <archive>      Add this archive to the catalog database.
--remove-specific-archive <archive>   Remove this archive from the catalog database.
-l, --list-catalogs                   List catalogs in databases for all backup definitions.
--list-catalog-contents <num>         List contents of a catalog by catalog number.
--list-archive-contents <archive>     List contents of an archive’s catalog, given the archive name.
--find-file <file>                    Search catalogs for a specific file.
--verbose                             Enable verbose output.
--log-level <level>                   `debug` or `trace`, default is `info`", default="info".

cleanup

This script cleans up old backups and manages storage. Supported options:

-d, --backup-definition                       Backup definition to cleanup.
-c, --config-file                             Path to 'dar-backup.conf', default='~/.config/dar-backup/dar-backup.conf.
-v, --version                                 Show version & license information.
--alternate-archive-dir                       Clean up in this directory instead of the default one.
--cleanup-specific-archives <archive>, ...    Comma separated list of archives to cleanup.
-l,  --list                                   List available archives.
--verbose                                     Print various status messages to screen.
--log-level <level>                           `debug` or `trace`, default is `info`", default="info".
--log-stdout                                  Print log messages to stdout.

clean-log

This script removes excessive logging output from dar logs, improving readability and efficiency. Available options:

-f, --file <path>          Specify the log file(s) to be cleaned.
-c, --config-file <path>   Specify the configuration file (default: ~/.config/dar-backup/dar-backup.conf).
--dry-run                  Show which lines would be removed without modifying the file.
-v, --version              Display version and licensing information.
-h, --help                 Displays usage info

installer

Sets up dar-backupfor a user.

It is non-destructive and stops if directories are already in place.

Create directories:

• ~/.config/dar-backup/
  • ~/.config/dar-backup/backup.d/
• ~/dar-backup/
  • ~/dar-backup/backups
  • ~/dar-backup/restore

Sets up demo config files:

• ~/.config/dar-backup/dar-backup.conf
• ~/.config/dar-backup/backup.d/default

-i, --install              Sets up `dar-backup`.
-v, --version              Display version and licensing information.
-h, --help                 Displays usage info