dave-it-guy 0.1.5

Deploy AI stacks with one command — OpenClaw, Ollama, and Qdrant, fully containerized. Install: pip install dave-it-guy. Run: dave-it-guy deploy openclaw; then docker exec -it dave-it-guy-openclaw openclaw tui for the TUI. Default LLM: Anthropic (Claude) when ANTHROPIC_API_KEY is set; Ollama (Llama 3.2) as fallback.

🐙 Dave-IT-guy

Deploy AI stacks with one command — OpenClaw and more, containerized by Dave-IT-guy.

Dave-IT-guy takes the pain out of AI infrastructure: one command spins up OpenClaw (and Ollama, Qdrant) fully containerized—no host installs, no config archaeology. Run it locally with Docker Compose or ship it to the cloud with Terraform. Same stack, same containers, anywhere.

Overview

Dave-IT-guy is a Python CLI that deploys pre-built AI stacks so you can run OpenClaw, Ollama, Qdrant, and similar tools without wiring Docker and config by hand.

• Local: Docker Compose stacks under ~/.dave-it-guy/deployments/<stack>/ — all services run in containers and are exposed on localhost (no host installs).
• Cloud (Pro): Terraform-based deploys (Azure supported; AWS, GCP, DigitalOcean planned)

Tech stack: Typer + Rich for the CLI, Jinja2 for templates, docker compose (with fallback to standalone docker-compose). Cloud: Terraform with Azure provider. Python 3.9+.

How it works: Templates live in dave_it_guy/templates/ (e.g. openclaw, ollama, rag). Each has a docker-compose.yml.j2, optional config/ and env.example. The deploy flow creates the deployment dir, renders templates, runs docker compose pull and up, and can pre-pull Ollama models. Use dave-it-guy doctor to check Docker, disk, and ports.

Highlights: Clear separation (CLI, deploy engine, templates, doctor), good UX (progress, dry-run, panels), CI on Python 3.10–3.12 with ruff and pytest. OpenClaw stack is the primary, fully supported path.

Current limitations: Pro/cloud path requires a license key (check not yet implemented). Cloud deploy exits after the license prompt — Terraform is not invoked from the CLI yet. The ollama and rag templates are in the registry but may be incomplete.

Quick Start

1. Install Dave-IT-guy:

   pip install dave-it-guy
   

   Verify: dave-it-guy version (or python3 -m dave_it_guy version if the script is not on your PATH). If you see “command not found: dave-it-guy", either add your Python script directory to PATH (e.g. ~/Library/Python/3.9/bin on macOS for a user install) or run all commands as python3 -m dave_it_guy <command>.

2. Deploy the OpenClaw stack (containers for OpenClaw, Ollama, Qdrant):

   dave-it-guy deploy openclaw
   # or: python3 -m dave_it_guy deploy openclaw
   

   Gateway: http://localhost:18789 · Qdrant: http://localhost:6333

3. Open the OpenClaw TUI (interactive terminal UI):

   docker exec -it dave-it-guy-openclaw openclaw tui
   

   Use the same container name you deployed (e.g. if you deployed as my-stack, the container is dave-it-guy-my-stack).

4. Optional — Deploy to cloud (Pro): dave-it-guy deploy openclaw --cloud azure

The OpenClaw stack uses Anthropic (Claude) as the default model when ANTHROPIC_API_KEY is set (prompted during setup or in ~/.dave-it-guy/deployments/openclaw/.env). Ollama (Llama 3.2) is configured as fallback when the key is missing or for local-only use.

What You Get

dave-it-guy deploy openclaw

A complete AI assistant stack:

• OpenClaw — personal AI agent framework (gateway on port 18789 by default)
• Ollama — local LLM inference (Llama, Mistral, Qwen, etc.); default is Anthropic (Claude) when ANTHROPIC_API_KEY is set, with Ollama as fallback
• Qdrant — vector database for memory (API and dashboard on port 6333)

Important: OpenClaw, Ollama, and Qdrant all run inside Docker containers. Nothing is installed directly on your host. Container ports are mapped to localhost, so you use the stack at http://localhost:18789 (gateway) and http://localhost:6333 (Qdrant)—containers on the inside, localhost on the outside.

All pre-configured, networked, and ready to go. Deployment files and secrets live in ~/.dave-it-guy/deployments/openclaw/ (including .env and config/). To change ports or re-run compose, use the same directory:

cd ~/.dave-it-guy/deployments/openclaw
# Optional: edit docker-compose.yml or .env, then:
docker compose up -d

ASCII Architecture Diagram

OpenClaw stack deployed by Dave-IT-guy — all services run in containers; you access them via localhost.

                    ┌─────────────────────────────────────────────────────────┐
                    │  Host (localhost)                                        │
                    │                                                          │
  dave-it-guy       │   :18789 (gateway)        :6333 (Qdrant API/dashboard)   │
  deploy openclaw   │         │                          │                     │
        │           │         ▼                          ▼                     │
        ▼           │  ┌──────────────┐            ┌──────────────┐          │
  ┌─────────────┐   │  │   Browser    │            │   Browser     │          │
  │ Dave-IT-guy │   │  │   / Client  │            │   / Client   │          │
  │    CLI      │   │  └──────┬───────┘            └──────┬───────┘          │
  └──────┬──────┘   │         │                          │                     │
         │          │         │                          │                     │
         │          │  ┌──────┴──────────────────────────┴──────┐             │
         │          │  │  Docker bridge network (dave-it-guy)   │             │
         │          │  │                                         │             │
         └──────────┼──┼──► ┌─────────────────┐                  │             │
                    │  │    │ dave-it-guy-     │                  │             │
                    │  │    │ openclaw        │◄─── :18789       │             │
                    │  │    │ (gateway + UI)  │                  │             │
                    │  │    └────────┬────────┘                  │             │
                    │  │             │                           │             │
                    │  │      ┌──────┴──────┐                    │             │
                    │  │      ▼             ▼                    │             │
                    │  │  ┌─────────────────┐  ┌─────────────────┐            │
                    │  │  │ dave-it-guy-    │  │ dave-it-guy-    │◄──── :6333 │
                    │  │  │ ollama (LLM)    │  │ qdrant (vectors) │            │
                    │  │  └─────────────────┘  └─────────────────┘            │
                    │  └─────────────────────────────────────────┘             │
                    └─────────────────────────────────────────────────────────┘

• Dave-IT-guy CLI renders config and runs docker compose up; all services run inside containers.
• OpenClaw talks to Ollama and Qdrant over the internal network; only the gateway (18789) and Qdrant (6333) are exposed on localhost.

Pricing

Tier	What	Price
Free	Local Docker Compose stacks	$0
Pro	Cloud templates (Terraform), priority support	$15/mo or $29 one-time

Stack Templates

Available Now

• openclaw — Full OpenClaw + Ollama + Qdrant
• ollama — LocalHost Ollama with model management
• rag — RAG pipeline (Qdrant + embeddings API)

Coming Soon

• langchain — LangChain + vector store + API
• comfyui — ComfyUI + model cache

Commands

dave-it-guy deploy <stack>          # Deploy a stack locally
dave-it-guy deploy <stack> --cloud <provider>  # Deploy to cloud (pro)
dave-it-guy list                    # List available stacks
dave-it-guy status [<stack>]         # Check running stacks
dave-it-guy stop <stack>            # Stop a stack (preserves data)
dave-it-guy destroy <stack>         # Remove a stack (use --volumes to remove data)
dave-it-guy logs <stack>            # View stack logs
dave-it-guy doctor                  # Diagnose common issues

Deploy options (e.g. for openclaw): --port / -p (gateway port), --ollama-port (expose Ollama on host), --dry-run (render config only), --gpu, --models llama3.1,mistral, --api-key / -k (Anthropic), --skip-setup (skip interactive prompts).

Teardown (destroy and uninstall)

To remove the stack and the CLI:

dave-it-guy destroy openclaw              # Stop containers and remove deployment files
dave-it-guy destroy openclaw --volumes    # Also remove data volumes (Qdrant, Ollama)
pip uninstall dave-it-guy                 # Uninstall the package
rm -rf ~/.dave-it-guy                     # Optional: remove config directory

Use python3 -m dave_it_guy destroy openclaw if dave-it-guy is not on your PATH.

Check Ollama and Qdrant

Use the stack name you deployed (e.g. openclaw if you ran dave-it-guy deploy openclaw). Status and logs only work for stacks that are already deployed.

# If you deployed OpenClaw (includes Ollama + Qdrant)
dave-it-guy status openclaw
dave-it-guy logs openclaw --service ollama
dave-it-guy logs openclaw --service qdrant

Cloud Providers (Pro)

Provider	Status
Azure	🔜 Coming Soon
AWS	🔜 Coming Soon
GCP	🔜 Coming Soon
DigitalOcean	🔜 Coming Soon

Requirements

• Python 3.9+
• Docker & Docker Compose (for local deploys)
• Terraform (for cloud deploys, auto-installed if missing)

License

MIT — Free and open source.

Cloud templates require a Pro license key.

---

Built by NeuroGamingLab · Dare to Dream, Inspire Leadership, and Spark Innovation Through Diverse Ideas.