dfxm-geo 2.3.1

Geometrical-optics forward model for dark-field X-ray microscopy

DFXM Geometrical-Optics Forward Model

A physics-based forward model that simulates Dark-Field X-ray Microscopy images of crystals with dislocations — published in the Journal of Applied Crystallography (2024).

What this is

Dark-Field X-ray Microscopy (DFXM) is a synchrotron technique for imaging crystal defects with sub-micron resolution deep inside bulk materials. This package implements the geometrical-optics (GO) forward model described in Borgi et al., J. Appl. Cryst. 57, 358 (2024). Given a dislocation configuration and a beamline geometry, it computes the expected detector image in two stages:

1. Reciprocal space — Monte Carlo ray tracing samples the instrument's angular and energy acceptance through monochromator, slits, condenser, CRL objective, and detector to build a voxelized resolution kernel Resq_i(q_rock', q_roll, q_2θ).
2. Direct space — the deformation field around each dislocation (Hirth & Lothe, mixed edge/screw via the slip-system angle α) is rotated into the imaging frame and convolved with the kernel to produce the detector image.

The default configuration targets the ID06 beamline at ESRF: Al 111 reflection at 17 keV, 88-lenslet Be CRL, ID06 goniometer geometry.

What it produces

A typical weak-beam DFXM image with five random edge dislocations in single-crystal aluminium, generated by the pipeline:

Each dislocation has its own Burgers vector, line direction, and slip-plane normal; the local contrast reflects how the lattice distortion field around each defect couples into the instrument's acceptance.

How it works — reciprocal space

The reciprocal-space stage draws Monte-Carlo rays from truncated-Gaussian distributions over the incident divergences (ζ_v, ζ_h) and energy bandwidth ΔE/E, filters them through the CRL numerical aperture, and bins the accepted q-vectors (q_rock', q_roll, q_2θ) into a 3D kernel. The figure below shows the raw point cloud for 50 000 rays at the default Al 111 / 17 keV setting:

The central black cloud is the angular/energy acceptance in the imaging coordinate system; the colored projections show its 2D shadows on each back-wall. Optional [beamstop] modes (square aperture in the BFP, knife edge, or absorbing tungsten wire) can be enabled to study weak-beam contrast enhancement.

How it works — direct space → detector

After the kernel is built, the forward stage rocks the sample through the Bragg condition over a (ϕ, χ) grid and renders the expected detector image at each angle. Taking the per-pixel center of mass of each pixel's rocking curve gives the local lattice tilt — one center-of-mass (COM) map per rocking axis, COM_ϕ and COM_χ (the two together make up the mosaicity). The geometrical-optics model predicts the same field directly, as the projection qi of the deformation onto the imaging axes, so the two should agree. The figure below makes that comparison for a low-angle wall of edge dislocations:

Top row: the (negated) ϕ and χ center-of-mass (COM) maps extracted from the rocking stack. Bottom row: the geometrical-optics qi₁ / qi₂ fields at the z = 0 sample plane. Wall of five edge dislocations, Al 111 @ 17 keV, computed with the v2.1.0 closed-form (analytic) resolution backend; all panels share a fixed ±10⁻⁴ rad color scale. The −COM ≈ qi correspondence — each top panel reproducing the one beneath it — recovers the result of Borgi et al. (2024).

Stack

• Language: Python 3.11+
• Key libraries: NumPy, SciPy, h5py, matplotlib
• HPC: Batch templates for LSF (DTU Sophia) and SLURM (ESRF clusters); HDF5 / BLISS-schema outputs
• Testing: pytest (498 tests) with reference golden datasets
• License: MIT

Install

pip install dfxm-geo

or from source:

git clone https://github.com/borgi-s/Geometrical_Optics_master.git
cd Geometrical_Optics_master
python -m venv .venv && source .venv/bin/activate     # or .venv\Scripts\activate on Windows
pip install -e ".[dev]"
pytest                                                # smoke tests against reference data

Run

A literally empty .toml file is a valid input (since v2.0.0): the empty case produces a single detector image of a single canonical FCC dislocation at the origin, Al 111 reflection at 17 keV.

If you installed from PyPI/wheel (no repo clone), first create local copies of the config templates:

dfxm-init   # writes ./configs/default.toml and the rest of the template tree

# one-time bootstrap (generates reciprocal-space kernel ~50 s; reusable thereafter):
dfxm-bootstrap --config configs/default.toml

# forward simulation:
dfxm-forward    --config configs/default.toml   --output ./run_output

# dislocation identification (image-to-library matching):
dfxm-identify   --config configs/identification_single.toml --output ./id_output

Every block in configs/default.toml shows the value the pipeline would use if the block were omitted — edit any block to override, delete to fall back to the default. For larger parameter sweeps, see lsf/ and slurm/ for ready-to-submit batch scripts. Output is written to a BLISS-schema HDF5 file (master + per-scan layout) that silx and darfix can consume directly.

Cite

If this code or the model is useful in your work, please cite:

Borgi, S., Ræder, T. M., Carlsen, M. A., Detlefs, C., Winther, G., & Poulsen, H. F. (2024). Simulations of dislocation contrast in dark-field X-ray microscopy. Journal of Applied Crystallography 57, 358–368. doi:10.1107/S1600576724001183

A second paper applying the model to individual-dislocation identification:

Borgi, S., Winther, G., & Poulsen, H. F. (2025). Individual dislocation identification in dark-field X-ray microscopy. J. Appl. Cryst. 58, 813–821.

Background

Developed during PhD research at DTU Physics in collaboration with ESRF (European Synchrotron Radiation Facility). The forward model is a Python port and substantial extension of the MATLAB script first introduced by Poulsen et al., J. Appl. Cryst. 54, 1555 (2021). The microscope schematic and example output above are adapted from S. Borgi, Dislocation identification using dark-field X-ray microscopy in bulk single-crystalline materials (PhD thesis, DTU Physics, 2025), Chapter 3.

Roadmap

Released: v2.0.0 (2026-05-23) — empty-TOML defaults, WallCrystalConfig defaults stripped (breaking), BLISS-schema HDF5 output, identification → HDF5. Next: Zenodo deposit of reference datasets; expanded multi-reflection support beyond Al; darling/darfix interop polish (see follow-up issues).