dinorefurb-disc-archiver

Every copy command shows this notice and refuses to run until you accept it (--accept-personal-use on the command line, a tick box in the window). Every output folder gets a PERSONAL-ARCHIVE-ONLY.txt with the same text.

What it does

It reads a disc with an established dumping program, then writes the copy in the formats you choose, from the most complete to the ones people most often have. It reads each format back and compares it with the dump, so a restoration can test its fingerprinting and asset import against every form a player's copy may come in, and know that each of them holds the same disc.

Reading the disc (--backend):

auto (the default) works down that list:

1. redumper, if it is installed, in the download's tools/ folder, or already downloaded;
2. otherwise the pinned redumper release, downloaded from GitHub. The window asks first; the command downloads unless given --no-download;
3. if the download is declined or fails, cdrdao, if it is installed;
4. otherwise the data track copy, which reads no audio. The log says so, and a disc profile that expects audio tracks reports the mismatch.

Asking for --backend redumper downloads it the same way, but fails rather than falling back. The backend's own files (redumper's .scram, .subcode, .toc and .log, for example) are kept unchanged in the archival folder.

Downloading redumper

The release to download is pinned in src/dinorefurb_disc_archiver/redumper.json: a tag and the SHA-256 of each platform's zip. A download is used only when its SHA-256 matches the pin; any other download is refused. It is unpacked, unmodified, into your own data folder under its tag, so a new pin downloads its own copy, and the copies of earlier tags there are removed once it is in place:

DISC_ARCHIVER_HOME moves that folder. disc-archiver install-redumper downloads it ahead of time, and disc-archiver tools says whether it is there. Downloading redumper is the archiver's only use of the network.

Writing the copy (--format, repeat for several):

--format all writes every format that can be made. --format recommended, the default, writes what the disc profile recommends.

Programs are found on PATH, or through DISC_ARCHIVER_REDUMPER, DISC_ARCHIVER_CDRDAO, DISC_ARCHIVER_TOC2CUE, DISC_ARCHIVER_CHDMAN and DISC_ARCHIVER_FFMPEG. A format whose program is missing is skipped and reported; the others are still written.

Install

Download (no Python needed)

Download the zip for your computer from the toolkit's releases and unpack it anywhere:

Each holds the window and the command, ready to run:

disc-archiver-<version>-windows-x64/
  Disc Archiver.exe          the window: double-click it
  disc-archiver.exe          the command, for a terminal
  tools/                     put chdman or ffmpeg here if you want those formats
  README.txt
  PERSONAL-ARCHIVE-ONLY.txt

On macOS the window is Disc Archiver.app, and on Linux disc-archiver-gui. The builds are not code-signed yet: on Windows choose More info and Run anyway if SmartScreen stops it; on macOS right-click the app and choose Open, or allow it under System Settings > Privacy & Security.

redumper is downloaded the first time you copy a disc (see Downloading redumper). Programs placed in tools/ (or tools/<name>/bin/) beside the executables are found first, so a redumper you downloaded yourself, chdman or ffmpeg can be dropped in there too.

With Python

For development, scripts and people who already have Python 3.12 or later. The window needs Tk, which the python.org installers for Windows and macOS include (on Debian and Ubuntu, install python3-tk).

pipx install dinorefurb-disc-archiver     # or: uv tool install dinorefurb-disc-archiver

This installs the same disc-archiver command and disc-archiver-gui window. redumper is downloaded on first use in the same way, or install it yourself and put it on PATH (or set DISC_ARCHIVER_REDUMPER).

Use it

The window

Double-click Disc Archiver (or run disc-archiver-gui). To start with a restoration's disc profile selected:

"Disc Archiver.exe" --profile path\to\disc-profile.json     # the download, on Windows
disc-archiver-gui --profile path/to/disc-profile.json         # installed with Python

Tick the notice, choose the drive (or an image you already made), the game's profile and the folder, and press Make the copy. The formats the profile recommends are ticked already.

The command

Everything the window does, the command does too, for scripts and for people who prefer a terminal. In the download it is disc-archiver.exe (Windows) or ./disc-archiver; installed with Python it is disc-archiver.

disc-archiver --help                                     # commands; disc-archiver <command> --help for options
disc-archiver tools                                      # backends, programs and drives found
disc-archiver install-redumper                           # download the pinned redumper now
disc-archiver rip --drive E: --output "D:\Discs\My Game" --name "My Game" \
    --profile disc-profile.json --accept-personal-use
disc-archiver rip --drive /dev/sr0 --output ~/discs/game --format all --accept-personal-use
disc-archiver convert --input "My Game.cue" --output ~/discs/game --format iso --format files \
    --accept-personal-use                                # formats from a copy you already have
disc-archiver check --input "My Game.cue" --profile disc-profile.json
disc-archiver formats                                    # every format, most complete first
disc-archiver notice                                     # the personal-use notice

convert and check read .cue (one or several BIN files, ISO-plus-WAVE sheets), .iso, .ccd and .chd (through chdman). rip passes --backend-arg values on to the backend program, for example --backend-arg=--retries=20 for redumper, and --no-download keeps it from downloading redumper. Progress goes to standard error and the summary to standard output.

Exit codes: 0 done and verified, 1 failed, 2 usage error or notice not accepted, 3 a profile check failed or a written format differs from its source.

On Windows, if redumper cannot open the drive, start the window or the terminal as administrator. On Linux, add yourself to the group that owns the drive (often cdrom).

Building the download

cd packages/disc-archiver
python -m pip install . -r packaging/requirements.txt
python packaging/build_bundle.py --out dist      # --no-gui-smoke without a display

It builds for the platform it runs on with PyInstaller and starts both executables before zipping them. --with-redumper also carries the pinned redumper in tools/redumper/ with its GPL-3.0 licence, checked the same way as a download, for a zip that works offline. CI builds all three platforms on every pull request and attaches them to each release.

The output folder

My Game/
  PERSONAL-ARCHIVE-ONLY.txt
  rip-manifest.json
  archival/      the backend's dump, as it wrote it (rip only)
  bincue/        My Game.cue, My Game.bin, PERSONAL-ARCHIVE-ONLY.txt
  iso/           My Game.iso, PERSONAL-ARCHIVE-ONLY.txt
  files/         My Game/ (the disc's files), PERSONAL-ARCHIVE-ONLY.txt

rip-manifest.json records:

• disc: the layout, the volume identifier (each byte read as the Latin-1 character of the same value without the trailing spaces and NULs, as the .NET OriginalContentSource.Label reads it, or null when it is all padding), each track's start, pregap and length, the SHA-256 of the data track's user data from INDEX 01, and the SHA-256 of each audio track's samples from INDEX 01 to the next track's INDEX 00. These hashes are the same whichever format holds the disc, so they are what restorations' fingerprints and the formats are compared by. CD-ROM XA masters leave empty form 2 sectors on MODE2 data tracks as padding and postgaps: mode 2 sectors whose two subheader copies agree and set the form 2 bit, with all 2,324 data bytes zero (the EDC is not checked). Wherever such a sector sits on the track, it adds 2,048 zero bytes to the data hash, the block a MODE1 image of the disc and an ISO hold there and the bytes the toolkit's OriginalContentSource.OpenVolume reads for it. data.emptyForm2Sectors lists those sectors as [first, stop) ranges counted from INDEX 01 ([] when there are none), since no ISO keeps the fact that they were form 2. A form 2 sector with any nonzero data byte, and a mode 2 sector of either form whose two subheader copies differ, holds no user data. A file whose extent covers an empty form 2 sector is not read: the files format, or a profile that lists expected paths (whose check reads the files), stops the run with its sector number before any format is written. A raw data track can run on past the ISO 9660 volume its primary volume descriptor declares, and some discs hold sectors there with no user data: no sync pattern, another mode, a form 2 sector that carries data, or subheader copies that differ. data.nonDataSectors lists those sectors as [first, stop) ranges counted from INDEX 01, and data.nonDataSha256 is the SHA-256 of their raw 2,352 bytes in order ([] and null when there are none). They add nothing to data.sha256. Inside the declared volume, or on a track with no volume descriptor (or one whose logical block size is not 2,048 bytes), a sector without user data stops the run with its sector number. When files is requested and a file's extent reaches one of the listed sectors, the run stops with its sector number before any format is written. The declared size is an address, resolved as Data tracks after audio describes; a track whose file system cannot be located admits no sector past its volume. The addresses stored in the sector headers are not checked.
• profile.checks: each expectation of the profile and what the disc showed.
• outputs: each format's files, with size, CRC32, MD5, SHA-1 and SHA-256 (the hashes disc databases such as Redump list, so you can check your dump against them yourself), what the format leaves out or generates (notes), and its verification:
  • matched: everything the source holds was compared and agreed.
  • partial: everything compared agreed, and notCompared lists what the format does not hold or could not be compared: audio left out of an ISO, lossy Ogg audio, sound in a pregap that ISO-plus-audio formats drop, which sectors were empty form 2 sectors (an ISO holds them as zero blocks, and its notes name them).
  • mismatched: differences says what differs.
• unavailable: formats that could not be made from this source, and why. A plain ISO has no raw sectors, so no BIN/CUE, CloneCD or CHD can be made from it. A data track with sectors that hold no user data has no ISO form, so the ISO formats are unavailable for it; BIN/CUE, CloneCD and CHD keep those sectors and compare them byte for byte.

Data tracks after audio

A CD-Extra (Enhanced CD) disc holds its audio in a first session and its data track in a second. That track's ISO 9660 volume is usually mastered with addresses counted from the start of the disc, while a volume on a disc's first track counts from the track. The archiver reads the primary volume descriptor at sector 16 of the track and tries each place the addresses can count from:

• the track's first sector;
• the track's LBA with the disc's tracks laid out back to back from LBA 0, as the archiver reads every image;
• for raw sectors, the LBA the header of sector 16 gives. A cue sheet lays the sessions out back to back without the lead-out and lead-in between them, and so does a CloneCD image, so on a CD-Extra dump this is the place that fits.

A place fits when the root directory extent the descriptor gives lands inside the track and the volume, past the volume descriptors, on a directory whose . record gives that same extent. Every address the file system gives, its file extents and declared volume size included, is read against the one place that fits. When none fits, or more than one does, the archiver does not choose: files is unavailable with the reason, a profile's expectedPaths stop the run, and the fingerprint admits no sector past the volume. An ISO-plus-cue copy of a CD-Extra disc made by another tool keeps no sector headers, so unless its sheet places the track where it sits on the disc its files cannot be located.

Disc profiles

A restoration describes its disc in a profile file (schema) and keeps it in its own repository. The file is UTF-8, with or without one leading byte order mark (which Windows PowerShell 5.1 writes for -Encoding utf8); a file starting with a UTF-16 or UTF-32 byte order mark or with more than one UTF-8 mark, or bytes that are not UTF-8, are refused with the cause named:

{
  "$schema": "https://raw.githubusercontent.com/kibertoad/refurbished-dinosaurs-toolkit/main/schemas/disc-profile.schema.json",
  "profile": 1,
  "title": "Example Game, English retail CD-ROM",
  "restoration": "example-game-restored",
  "layout": "mixed-mode",
  "volumeIdentifier": "EXAMPLE",
  "audioTracks": 11,
  "expectedPaths": ["DATA"],
  "recommendedFormats": ["bincue"],
  "notes": "Shown in the window under the profile."
}

layout is data-only (one ISO 9660 track) or mixed-mode (a data track followed by CD audio). recommendedFormats are the formats the restoration's importer reads, and are ticked by default. Any expectation the profile leaves out is not checked. The built-in profiles are any, data-only and mixed-mode; without a recommendation a data-only disc gets iso and anything else gets bincue, which keeps the audio. A copy with no raw sectors falls back to iso.

Python

from pathlib import Path

from dinorefurb_disc_archiver import derive, fingerprint, load_profile, open_source

with open_source(Path("game.cue"), Path("work"), print) as disc:
    print(fingerprint(disc))
    derive(disc, Path("out"), "game", ["bincue", "iso"], load_profile("mixed-mode"), print, {})

The supported imports are the names in dinorefurb_disc_archiver.__all__.

Limits

• Sessions are not kept. A cue sheet's REM SESSION lines are ignored, so a multisession disc's tracks are laid out back to back without the gap between sessions, in the manifest's track starts and in the BIN/CUE, CloneCD and CHD written from it. A cue sheet's first track must start at INDEX 01 00:00:00; POSTGAP, MODE2/2336, CDG and MOTOROLA files are refused.
• Cue sheets are limited to 1 MiB and 99 tracks, profiles to 64 KiB, file systems to 200,000 files.
• data-copy stops at the first sector that still fails after five reads. Nothing stands in for an unread sector.
• The CloneCD subchannel is generated, not read: it carries no copy-protection marks. Use the redumper dump in archival when they matter.
• Drives are listed on Windows and Linux. On macOS, give --drive as redumper names it.