DPEA_DPi

Python drivers for the DPEA Pi family of circuit boards developed by Stan Reifel.

Installation

Add the package to an exhibit project:

uv add dpeaDPi

On the DPEA Raspberry Pi image, this also installs rpi-lgpio, which provides the RPi.GPIO module used by DPiComputer. The image includes the native build dependencies required by lgpio on Python 3.13.

RS485 drivers do not open /dev/serial0 when they are imported or constructed. The default shared network opens it when the first command is sent. Tests and applications can pass a configured DPiNetwork or another compatible network object into a board constructor. The package does not automatically select a simulated hardware backend.

DPiComputer also initializes GPIO and I2C on first use. Its constructor accepts compatible gpio and i2cBus objects for integration tests.

Testing without hardware

There are three separate layers for running without physical boards. Pick the one that matches what you are doing.

1. Low-level injection (for this package's own tests). Every driver accepts an injected transport or backend: DPiNetwork(serialPort=...) for the RS485 boards, and DPiComputer(gpio=..., i2cBus=...) for GPIO and I2C. This exercises packet and pin behavior. Consumers should not need to emulate packets or pins.

2. Board simulation (for consumer applications and tests). The dpeaDPi.simulation package provides a SimulatedDPiXxx for each board with the same public methods as the real driver, so application code runs unchanged against either. Simulated physical input (button presses, sensor changes, motion completion) is driven through a separate .controls object. The simulators use no serial, GPIO, I2C, real sleeps, or threads, and one injected SimClock gives deterministic timing.

   from dpeaDPi.simulation import SimState, SimulatedDPiButton
   
   state = SimState()
   button = SimulatedDPiButton(state=state)
   button.controls.press(0)
   assert button.readRGBButtonLatch(0) == (True, True)
   
   state.fail_next("button", "readRGBButtonLatch")
   assert button.readRGBButtonLatch(0) == (False, False)
   

   Import the simulators explicitly. Nothing is auto-selected based on the operating system, and the real drivers never import this package.

3. Consumer composition (for structuring an exhibit). Choose real or simulated hardware once, at the application's composition root, and keep the decision out of business logic. See DPi_Examples/consumer_backend for a complete reference, DPi_Examples/simulations for runnable simulated board examples and consumer-side tests, and DPi_Examples for board, application, and diagnostic examples that all run against real or simulated hardware.

Development

Install the locked project and development dependencies:

uv sync --locked --all-groups

Run the tests and build both package distributions:

uv run --locked pytest
uv build --no-sources

Behavioral test suite

The tests have both fixed cases and hypothesis generated test cases (property based testing). The fixed cases test the addresses, commands, field order, byte encoding, decoded values, and GPIO pin mappings.
The generated cases then test useful input domains and short state or recovery sequences without replacing those independent tests.

These tests require no physical boards. RS485 driver tests run real DPiNetwork framing and parsing against a scripted serial port. Cases specify expected payload and response bytes, so equivalent uses of the integer push and pop helpers remain interchangeable. DPiComputer tests inject GPIO, PWM, and strict integer-byte I2C backends. Controlled clocks and patched sleeps keep retry and multi-board tests deterministic.

Covered behavior includes:

• Board addresses, command routing, payload fields, signed values, and response decoding.
• Transport retries, partial responses, checksum rejection, parser recovery, and transaction isolation.
• GPIO mapping, PWM lifecycle and channel isolation, Pico I2C values, and pixel upload order.
• Stepper and Robot configuration, homing, movement, buffering, failure exits, and later recovery.

Run the complete suite or only the generated cases:

uv run --locked pytest -q
uv run --locked pytest -q tests -k generated

The suite has no public method inventory, count assertion, or registration tests. When extending a driver, add expected inputs, wire or GPIO outputs, decoded results, and relevant failure cases to a suitable existing fixture or a focused direct or flow test. A WireCase row is useful for a single-command RS485 path, but it is optional. Multi-command operations need behavioral tests that check required ordering and failure outcomes. Homing tests allow independent motor polls to vary while requiring stops before reversals and cleanup on abort.

Test observable contracts instead of private object layout or unnecessary ordering between independent operations. Preserve required ordering on the same channel, such as stopping PWM before a digital write. New public behavior still needs meaningful tests even though no registry detects it automatically.

Use fixed cases for command numbers, pin mappings, and literal packet anchors. Use generated cases for value boundaries, interleaved state transitions, and failure recovery. A later successful read or motion operation checks recovery beyond a successful ping.

Releases

Merging a new package version into main runs the full test and package checks. CI creates a tag such as v1.0.0 from the version in pyproject.toml, then publishes the exact artifacts to PyPI with Trusted Publishing. No manual tag or PyPI upload is required.

Configure the PyPI trusted publisher once with these values:

• Owner: dpengineering
• Repository: DPEA_DPi
• Workflow: publish.yml
• Environment: pypi

No PyPI token is stored in GitHub.