Duka Connect
An event-driven Python client for Duka One ventilation units on the local network, over the unit's own UDP protocol.
You subscribe to the values you care about and are told when one changes - with its quality, so "offline", "not on this unit" and a real value never look alike.
Supported units
| Unit | Status |
|---|---|
| Duka One (S6W, 50+) | Points are from the manufacturer's connection guide; the clock battery's voltage has been read on a unit, the rest not yet |
Every point is taken from the manufacturer's connection guide for the protocol, and most have
not been tested on a unit. point.certainty says so: REPORTED until a point has been read
on a Duka One, VERIFIED after. Values may be wrong or missing; reports of what a unit shows are
welcome. What each point is: docs/protocol.md; the manufacturer's documents
themselves: docs/models.
Installation
pip install duka-connect
Everything you use comes from duka_connect; a simulated unit for your own tests is in
duka_connect.testing. It depends only on event_connect, the protocol-free core it is built on.
Usage
import asyncio
from duka_connect import Client, PointKey
def on_change(key, old, new):
print(f"{key}: {new.value} ({new.quality.name})")
async def main():
# The device id is in Duka's app; the password is 1111 unless it was changed there.
client = Client("<unit-ip>", "<device-id>", "1111")
await client.connect() # reads every point once
client.subscribe(PointKey.HUMIDITY, on_change)
client.subscribe(PointKey.ALARM, on_change)
client.subscribe(PointKey.RTC_BATTERY_VOLTAGE, on_change)
while True: # you own the clock; the library owns the plan
await client.poll() # reads only what is due - free when nothing is
await asyncio.sleep(1)
asyncio.run(main())
discover() lists the units that answer a broadcast, with their address and device id.
Values
Every value is a DataValue with .value, .quality, .timestamp (when the unit answered,
in UTC), and .raw: the bytes the unit answered.
| Quality | Meaning |
|---|---|
GOOD |
A value the unit answered. |
NO_DATA |
The unit answered a number no state names. |
STALE |
The last read failed; the value is the last good one. |
MISSING |
The unit says it does not have this value. |
A subscribed point is read on its poll rate: FAST 10 s, MEDIUM 30 s, SLOW 60 s, RARE
15 min, or STATIC, once when connecting. set_poll_interval(key or poll rate, seconds) changes
one, and refresh() reads now.
A point names what its change affects, in on_change, and a command what it changes, in
on_write: a Refresh of those points, after a wait, and read again until they settle where it
says so. When the alarm clears, the battery and filter are read 10 seconds later, and again every
10 seconds while they change, for up to 2 minutes; a new speed has the fans read 3 seconds later,
until they settle. What is read again is what is subscribed to. docs/protocol.md lists every one.
One request is sent at a time, and whatever is due when the unit is free goes out together. A
read asked for after a change does not move a point's own rhythm, so points read together stay
together. A request the unit does not answer is sent again, attempts times in all; a read still
unanswered waits for its next turn, and its value meanwhile is the last good one, STALE. Once
the unit answers again, whatever failed meanwhile is read at once. After two requests in a row go
unanswered, the unit is not asked for 10 seconds, so a pass over a silent unit fails at once
rather than waiting out every request; then one request probes it (DUKA_ONE_BREAKER, which a
different CircuitBreaker given to Client replaces). The unit counts as not answering -
Status.CONNECTED false - only after half a minute without an answer, so one lost packet does
not make it unavailable; when it answers again, every subscribed point is read. A different
Timing can be given to Client; DUKA_ONE_TIMING is the one a Duka One is read by.
client.status(Status.CONNECTED) says whether the unit answers, and
subscribe_status(Status.CONNECTED, callback) tells every change. client.diagnostics() counts the requests,
those left unanswered or held back while the unit is not asked, and the breaker's state, for a
bug report; it never holds the address, device id or password.
Writing
from duka_connect import PointKey, Speed, VentilationMode, Write
await client.write(PointKey.VENTILATION_MODE, VentilationMode.HEAT_RECOVERY)
await client.write_sequence([Write(PointKey.SPEED, Speed.MANUAL), Write(PointKey.MANUAL_SPEED, 120)])
await client.write(PointKey.RESET_FILTER_TIMER, True) # a command, sent with True
A write returns whether the unit took it. A setting is answered by the unit with its new value,
which the client then holds. A command is not answered, so what it changed is read a second after
it is sent, at the next poll().
A value outside a point's limits, or of another type, raises InvalidValueError before anything
is sent; a point that cannot be written raises ValueError.
| Error | Meaning |
|---|---|
CannotConnectError |
The unit did not answer. A unit does not answer a wrong device id or password either. |
UnsupportedDeviceError |
The unit answered, but not as a Duka One does. |
Measuring your unit
The waits after a change are first estimates, not yet measured on a Duka One.
duka_connect.testing measures them on yours:
from duka_connect.testing import measure_fan_settling, measure_latency, recommended_refresh
print(await measure_latency(client)) # how long the unit takes to answer
settlings = await measure_fan_settling(client) # low to high and back; changes the speed
for settling in settlings:
print(settling)
print(recommended_refresh(settlings, every=0.5)) # an `after` and an `until_stable` for the fans
measure_fan_settling changes the unit's speed while it runs, and sets it back afterwards.
Trying it on your unit
pip install -e . -r requirements-test.txt
DUKA_HOST=<unit-ip> DUKA_DEVICE_ID=<device-id> python -m pytest -m live -s
It only reads, and prints what the unit answers for every point.
License
MIT
Metadata
Release files for duka-connect 0.6.5
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | Provenance | Actions |
|---|---|---|---|---|
| duka_connect-0.6.5.tar.gz | 44.3 kB | With provenance | Details for duka_connect-0.6.5.tar.gz |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Actions Reset |
|---|---|---|---|---|
| duka_connect-0.6.5-py3-none-any.whl | Python 3 | none | any | Details for duka_connect-0.6.5-py3-none-any.whl |
Total release size: 70.5 kB
Release files / duka_connect-0.6.5.tar.gz
| Download URL | duka_connect-0.6.5.tar.gz |
|---|---|
| Size | 44.3 kB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
485933bafd15b16d64c50e35b3edb859cad50113649063f1e716368d39fe5eea
|
|
BLAKE2b-256 checksum How to use checksums |
b260ba41596f2f2a22a691ea061da0fb10cd20392265dfed9dcf900428d82421
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.16
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Nov 15, 2026.
Transparency logRelease files / duka_connect-0.6.5-py3-none-any.whl
| Download URL | duka_connect-0.6.5-py3-none-any.whl |
|---|---|
| Size | 26.1 kB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
258fed1d1e88d0d732a1bb81537b9d087c509af12ce87396dc973775548febf1
|
|
BLAKE2b-256 checksum How to use checksums |
09e606fa65fe1a8ca80b74c017836c218c9b44d9e84f802b30dc56cb7f2da7f8
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.16
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Nov 15, 2026.
Transparency logSecurity for duka-connect 0.6.5
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
Full provenance
Both files in this release have been uploaded with provenance metadata.
Attestation for duka_connect-0.6.5.tar.gz
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Nov 15, 2026.
Transparency logA note on package security
PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.
To learn more about protecting yourself from malicious actors, visit our package security documentation.