duosida-ev 0.1.3

Python library for direct TCP control of Duosida EV wall chargers

duosida-ev

Python library for direct TCP control of Duosida EV wall chargers, bypassing the cloud API for local control and monitoring.

Features

• Network Discovery: Find Duosida chargers on your local network
• Real-time Telemetry: Read voltage, current, power, temperature, and energy consumption
• Current Control: Set maximum charging current (6-32A)
• Start/Stop Charging: Remote control to start or stop charging sessions
• Configuration Settings: Connection timeout, max/min voltage, max temperature, direct work mode
• JSON Export: Get telemetry data as JSON for integration with other tools
• No Cloud Required: Direct TCP communication with the charger

Installation

pip install duosida-ev

Or install from source:

git clone https://github.com/americodias/duosida-ev.git
cd duosida-ev
pip install -e .

Quick Start

Discover Chargers

from duosida_ev import discover_chargers

devices = discover_chargers()
for device in devices:
    print(f"Found: {device['ip']}")
    print(f"  Device ID: {device['device_id']}")
    print(f"  MAC: {device['mac']}")

Get Status

from duosida_ev import DuosidaCharger

charger = DuosidaCharger(
    host="192.168.1.100",
    device_id="YOUR_DEVICE_ID"
)

charger.connect()
status = charger.get_status()
print(f"Voltage: {status.voltage}V")
print(f"Current: {status.current}A")
print(f"Power: {status.power}W")
print(f"State: {status.state}")
charger.disconnect()

Set Maximum Current

charger.connect()
charger.set_max_current(16)  # Set to 16A
charger.disconnect()

Configure Charger Settings

Note: All configuration methods are write-only. The charger does not return configuration values in its status response. You must track configuration settings externally if needed.

charger.connect()

# Connection timeout (30-900 seconds)
charger.set_connection_timeout(120)

# Temperature limits (85-95°C)
charger.set_max_temperature(90)

# Voltage limits
charger.set_max_voltage(280)    # 265-290V
charger.set_min_voltage(90)     # 70-110V

# Direct work mode (plug and charge)
charger.set_direct_work_mode(True)   # Enable
charger.set_direct_work_mode(False)  # Disable

# LED brightness (0=off, 1=low, 3=high)
charger.set_led_brightness(3)

# Stop on EV disconnect
charger.set_stop_on_disconnect(True)  # Enable auto-stop

# Generic config (any key/value)
charger.set_config("VendorMaxWorkCurrent", "16")

charger.disconnect()

Start/Stop Charging

charger.connect()

# Start charging
charger.start_charging()

# Stop charging
charger.stop_charging()

charger.disconnect()

Get Telemetry as JSON

import json

charger.connect()
status = charger.get_status()

# Convert to dictionary
data = status.to_dict()
print(json.dumps(data, indent=2))

# Access individual fields
print(f"CP Voltage: {status.cp_voltage}V")
print(f"State: {status.state}")

charger.disconnect()

Monitor Continuously

def on_status(status):
    print(f"Power: {status.power}W")

charger.connect()
charger.monitor(interval=2.0, callback=on_status)
charger.disconnect()

Command Line Interface

# Discover chargers on the network
duosida discover

# Get charger status
duosida status --host 192.168.1.100 --device-id YOUR_DEVICE_ID

# Get status in JSON format
duosida status --host 192.168.1.100 --device-id YOUR_DEVICE_ID --json

# Set maximum current
duosida set-current --host 192.168.1.100 --device-id YOUR_DEVICE_ID 16

# Start charging
duosida start --host 192.168.1.100 --device-id YOUR_DEVICE_ID

# Stop charging
duosida stop --host 192.168.1.100 --device-id YOUR_DEVICE_ID

# Monitor continuously
duosida monitor --host 192.168.1.100 --device-id YOUR_DEVICE_ID

# Configuration commands (host only - device ID auto-discovered)
duosida set-timeout --host 192.168.1.100 120          # 30-900 seconds
duosida set-max-temp --host 192.168.1.100 90          # 85-95°C
duosida set-max-voltage --host 192.168.1.100 280      # 265-290V
duosida set-min-voltage --host 192.168.1.100 90       # 70-110V
duosida set-direct-mode --host 192.168.1.100 on       # on/off
duosida set-led-brightness --host 192.168.1.100 3     # 0=off, 1=low, 3=high

Telemetry Fields

Field	Description
conn_status	Connection status code (0-6)
cp_voltage	Control Pilot voltage (V)
state	Human-readable status (Available, Charging, Finished, etc.)
voltage	Line voltage L1 (V)
voltage_l2	Line voltage L2 (V)
voltage_l3	Line voltage L3 (V)
current	Charging current L1 (A)
current_l2	Charging current L2 (A)
current_l3	Charging current L3 (A)
power	Power consumption (W)
temperature_station	Station temperature (°C)
session_energy	Current session energy (kWh)
session_time	Session duration (minutes)
device_id	Device identifier
model	Device model
manufacturer	Manufacturer
firmware	Firmware version

Status Codes

Code	State
0	Available
1	Preparing
2	Charging
3	Cooling
4	SuspendedEV
5	Finished
6	Holiday

Finding Your Device ID

The device ID can be found:

• On the QR code label on the left side of the charger
• Using the duosida discover command (when on the same network)
• In the official Duosida mobile app
• In Home Assistant integration settings

Requirements

• Python 3.6+
• No external dependencies (uses only standard library)

Protocol Details

• Port: 9988 (TCP)
• Message Format: Protobuf
• Discovery: UDP broadcast on port 48890/48899

See Settings Reference for detailed documentation on charger configuration options (Direct Work Mode, Level Detection, etc.).

Capturing Network Traffic

To capture traffic between the Duosida app and charger for reverse engineering, you can use Wireshark on a computer connected to the same network, or use tcpdump on your router if it supports SSH access.

Using Wireshark

1. Install Wireshark
2. Connect your computer to the same network as the charger
3. Start capture with filter: host <charger-ip> and tcp port 9988
4. Use the Duosida app to interact with the charger
5. Stop capture and save the .pcap file

Using tcpdump on Router

If your router supports SSH (OpenWrt, DD-WRT, etc.):

ssh root@<router-ip>

# Capture traffic to/from charger
tcpdump -i br-lan -w /tmp/charger_capture.pcap \
  'host <charger-ip> and tcp port 9988'

Download the capture:

scp root@<router-ip>:/tmp/charger_capture.pcap ./charger_capture.pcap

UniFi Dream Machine Pro specific instructions

For UDM Pro with separate access points, you need to SSH into the Access Point where the phone or charger is connected (not the UDM Pro itself, since local traffic may not pass through the router):

# SSH into the Access Point (not the UDM Pro)
ssh root@<access-point-ip>

# Capture on the wireless interface (ra2) for your IoT VLAN
tcpdump -i ra2 -w /tmp/charger_capture.pcap \
  'host 192.168.1.100 and host 192.168.1.50 and tcp port 9988'

Options:

• -i ra2 - Interface for 2.4GHz/5GHz AP (wireless)
• host 192.168.1.100 - Charger IP
• host 192.168.1.50 - Phone IP (update as needed)

Alternative - capture everything for 30 seconds:

timeout 30 tcpdump -i ra2 -w /tmp/charger_full.pcap \
  'host 192.168.1.100 and tcp port 9988'

Download the capture from the AP:

scp root@<access-point-ip>:/tmp/charger_capture.pcap ./charger_capture.pcap

License

MIT License - see LICENSE file for details.

Contributing

Contributions are welcome! Please feel free to submit a Pull Request.

Acknowledgments

This library was created by reverse-engineering the TCP communication between the official Duosida app (orange icon, local control) and the charger. Note that Duosida has two apps - the orange one uses direct local communication while the blue one uses the cloud API.

The reverse engineering and code development was mostly done using Claude Code and Genspark.

References:

• Home Assistant Duosida integration - Cloud API integration, used as reference for status codes and feature identification