easywave-home-control 0.2.0

Pure Python async/await implementation for controlling EASYWAVE radio modules (RX11, RX21, RX22, RX25, RX09)

EASYWAVE Home Control

Pure Python async/await implementation for controlling EASYWAVE radio modules (RX11, RX21, RX22, RX25, RX09).

Optimized for Home Assistant integration with a non-blocking async API and a codec layer for typed telegram/state parsing.

What's New in 0.2.0

• EWB codec — parse/encode state for all seven neo device types (switch, dimmer, motor, dual/quad variants)
• Secwave codec — IRP helpers and parsers for SEC_RCV, SEC_LEARN, SEC_SEND, SEC_REPLY_QUERY (aligned with RX21 spec)
• Easywave Basic codec — button-byte encoding and parse_ew_rcv_ex_result for EW telegrams
• Protocol fixes — corrected Secwave IRP/ICP layouts; spec-accurate RX09 response parsing
• Examples & tests — updated HA/coordinator patterns; 45 unit tests

Features

• Pure Async/Await — no blocking calls on the event loop
• Multi-Family Support — binary protocol (RX11/21/22/25) + ASCII protocol (RX09)
• Codec Layer — typed parse/encode instead of raw byte juggling in integrations
• Robust — error handling, health checks, timeout management
• Clean API — unified .create() factory method for all devices
• Type Hints — Pylance strict-mode compliant annotations

Installation

pip install easywave-home-control

Quick Start

import asyncio
from easywave_home_control import RX11Device, RX11ErrorCode

async def main():
    device = await RX11Device.create(port="/dev/ttyUSB0", timeout=5.0)
    try:
        connected = await device.ping_request(timeout=3.0)
        print(f"Connected: {connected}")

        result, hw_version = await device.query_hw_version()
        if result == RX11ErrorCode.SUCCESS:
            print(f"Hardware: {hw_version}")
    finally:
        await device.disconnect()

asyncio.run(main())

Codec Layer

The library separates protocol transport (IRP/ICP over serial) from codec parsing (state words, telegrams, sensor payloads). Home Assistant integrations typically keep device mapping and persistence in the integration layer and use the codec for encode/decode.

Easywave Bidi (EWB neo)

from easywave_home_control import parse_ewb_rcv, parse_ewb_state, encode_ewb_state
from easywave_home_control.codec import StateDirection, SwitchChangeCommand, SwitchDesiredAction
from easywave_home_control.protocols.rx11_rx2x.protocol import DeviceType

# Listen loop (after ewb_rcv_request)
event = parse_ewb_rcv(info_type, serial, info_data, device_type=DeviceType.EWB_DT_SWITCH)

# Query / change state
state = parse_ewb_state(device_type, mode, raw_bytes)
raw = encode_ewb_state(
    device_type, 0,
    SwitchChangeCommand(action=SwitchDesiredAction.ON),
    direction=StateDirection.TO_DEVICE,
)

Supported device types: switch, dual/quad switch, dimmer, motor, dual/quad motor.

Easywave Basic (EW)

from easywave_home_control.codec import easywave, parse_ew_rcv_ex_result

button_byte = easywave.encode_send_button_byte(easywave.EasywaveSendButton.A)
await device.ew_send_cmd_request(gateway_serial, button_byte)

error_code, event = parse_ew_rcv_ex_result(await device.ew_rcv_ex_request())

Secwave

from easywave_home_control import secwave

error_code, telegram = secwave.parse_sec_rcv_result(await device.sec_rcv_request())

params = secwave.encode_sec_send_cmd_tel_params(
    secwave.SecSendCmdTelRequest(
        button_number=0,
        query=secwave.SecQuery(wants_reply=True, reply_only=False),
        command=int(secwave.SecwaveCommand.OPEN),
        flags=secwave.SecTransmitterFlags(mobile=False, low_battery=False),
    )
)
result, primary, secondary = await device.sec_send_cmd_tel_request(params)
response = secwave.parse_sec_send_response(primary, secondary, queried_reply=True)

See examples/ and examples/README.md for full workflows.

Device Support

RxModule Family (Binary Protocol)

Device	Type	EW	EWB	Secwave	Baudrate
RX11	USB Transceiver	✓	✓	✓	115200
RX21	Serial Module	✓	✓	✓	115200
RX22	Serial Module	✓	✓	✓	115200
RX25	Serial Module	✓	✓	✓	115200

RX09 Family (ASCII Protocol, Easywave Basic only)

Device	Type	Baudrate	Notes
RX09	Basic Transceiver	57600	Spec-accurate ASCII command parsing

Async API

RxModule Devices

from easywave_home_control import RX11Device, RX11ErrorCode

device = await RX11Device.create(port="/dev/ttyUSB0")

# Easywave Basic
result, info_type, serial, info_data = await device.ew_rcv_ex_request(timeout=30.0)
await device.ew_send_cmd_request(gateway=gateway_serial, button=0)

# Easywave Bidi
result, device_type, receiver = await device.ewb_join_device_request(gateway_serial)
result, mode, state = await device.ewb_query_state_request(gateway, receiver, desired_mode=0)

# Secwave
result, stor_index, *_ = await device.sec_rcv_request(timeout=30.0)
await device.sec_learn_request(user_data=0x00000001, timeout=30.0)

RX09 Device

from easywave_home_control import RX09Device, RX09ErrorCode

device = await RX09Device.create(port="/dev/ttyUSB0")

result, serial_number, button = await device.receive_telegramm(timeout=30.0)
result, num_positions = await device.query_positions()
result = await device.send_telegramm(position=0, button="A")

Common Methods (All Devices)

await device.connect()          # called automatically by .create()
await device.disconnect()
await device.get_device_info()
await device.ping_request(timeout=5.0)
device.is_connected

RxModule Status Properties

device.connection_status   # "connected", "disconnected", "reconnecting", "error", "hardware_error"
device.has_hardware_error
device.state_good
device.last_error

Examples

Example	Description
ew_send_receive_example.py	EW gateway discovery, send, receive with codec
ewb_pairing_example.py	EWB join, query, change, listen
secwave_example.py	Secwave listen, learn, send, reply
ha_integration_full_example.py	HA coordinator pattern (restore, listen, turn_on)

Testing

pip install -e ".[dev]"
pytest tests/ -v

Protocol Details

RxModule (RX11/21/22/25)

Binary protocol: [SOP 0x81] [Function + Params] [EOP 0x82] with byte stuffing, IRP/ICP request/response pairs, and optional indefinite timeouts on receive functions.

RX09 (RTR09)

ASCII protocol at 57600 8N1: comma-separated commands, \r terminator, responses such as ID,<vendor>,<device>,<version> and spontaneous REC,<serial>,<button>.

Requirements

• Python 3.9+
• pyserial >= 3.5

License

Apache License 2.0 — see LICENSE.

Contributing

Contributions are welcome! Please submit issues and pull requests to the Home Assistant repository.

Support

For integration guidance, see the Home Assistant Easywave Integration documentation.