ebus-service-discovery-client 0.1.1

Client and shared model for an mDNS/DNS-SD service-discovery bus over MQTT: subscribe to advertisements, honor freshness/tombstones, and resolve a reachable address per interface

ebus-service-discovery-client

Client and shared model for an mDNS/DNS-SD service-discovery bus over MQTT. A discovery service browses the local network and publishes each advertisement as a retained MQTT record; consumers subscribe, keep a fresh view (honoring freshness and tombstones), and resolve a target service to a reachable address per interface.

This library is the consumer side plus the shared wire contract: the record model, its JSON Schema, a live-view resolver, and a debug CLI. A publisher and any number of clients share the contract described below.

• Why
• Install
• The contract — topic, record schema, tombstones, freshness
• Library usage — model, resolver, validation
• CLI usage — dump / watch / resolve / validate / stats / snapshot / diff, plus --json
• Releasing · Contributing · License

Status: alpha. The API and the v1 contract may still shift before 1.0.

Why

Network advertisements are messy in ways every consumer otherwise re-solves alone:

• An advertised IPv4 can be a self-assigned APIPA (169.254.x) address that is unroutable, while the peer is reachable only over IPv6.
• The same instance can be heard on several interfaces with different addresses; reachability is per-interface (a probe must bind to the right one).
• Records go stale unless something expires them.

So the contract is deliberately honest and raw — it carries the current addresses per interface plus an explicit freshness/tombstone state — and the classification and reachability policy live here, in one place, so every consumer gets them for free instead of reinventing (often buggy) copies.

Install

pip install ebus-service-discovery-client
# optional JSON-Schema validation (CLI `validate`, strict callers):
pip install "ebus-service-discovery-client[validation]"

Requires Python 3.10+. Depends on ebus-mqtt-client for MQTT transport.

The contract

The wire contract is what a publisher and every consumer agree on. It is versioned (v1) and specified normatively by record.schema.json (JSON Schema draft 2020-12). This section is the human-readable version.

Topic

Each record is published as a retained message on:

{base}/v1/{service_type}/{interface}/{percent_encoded_instance}

Segment	Meaning
{base}	Deployment topic root. Default local/mdns/discovery (so the full base is local/mdns/discovery/v1).
{service_type}	DNS-SD service type, e.g. _http._tcp.
{interface}	The network interface the advertisement was observed on, e.g. eth0. The record's addresses are the candidates reachable via this interface.
{percent_encoded_instance}	The DNS-SD service instance label, percent-encoded so an arbitrary UTF-8 label (spaces, /, unicode) is a single safe topic segment.

Keying by instance (not hostname) is deliberate: DNS-SD identity lives in the instance name, and two instances can share a host. Splitting by interface is deliberate too: the same instance heard on eth0 and wlan0 is two records with different reachability.

Record payload

Field	Type	Required	Meaning
schema_version	int (1)	yes	Contract major version.
service_type	string	yes	DNS-SD service type.
instance_name	string	yes	The unencoded DNS-SD instance label (the topic carries a percent-encoded copy).
hostname	string	yes	SRV target hostname, e.g. host-1234.local.
interface	string	yes	Observing interface.
port	int	yes	SRV port as advertised. A client may deliberately use a different port.
addresses	array of {address, family}	yes	The current advertised addresses on this interface. Never carried forward; may be empty transiently or contain only IPv6.
txt	object of string→string	yes	DNS-SD TXT key/values.
state	"active" | "removed"	yes	removed is a tombstone (see below).
first_seen	RFC 3339 UTC	yes	When first observed.
last_seen	RFC 3339 UTC	yes	When most recently confirmed. Authoritative freshness.
ttl_seconds	int	no	Advertised TTL / expected refresh window.
removed_at	RFC 3339 UTC	iff removed	Tombstone timestamp.

Addresses are carried raw — only {address, family}. Scope, APIPA, and link-local classification are derived client-side from the address value (see the model) so the taxonomy can evolve without a contract change.

Tombstones and freshness

A record is removed in one of two ways, and a consumer honors both:

1. Tombstone message — a retained record with state: "removed" (the full last-known fields plus removed_at). This is the primary mechanism; it fires on a DNS-SD goodbye, a TTL expiry, or a browse ItemRemove.
2. Empty retained payload — clearing the retained topic (a zero-length message) also means "gone."

Freshness is age = now - last_seen. A consumer can also age a record out itself once age > ttl_seconds (a backstop for a missed tombstone) via Record.is_stale(...).

Example

Active record:

{
  "schema_version": 1,
  "service_type": "_http._tcp",
  "instance_name": "Example Device 42",
  "hostname": "host-1234.local",
  "interface": "eth0",
  "port": 80,
  "addresses": [
    { "address": "192.168.1.10", "family": "ipv4" },
    { "address": "2606:4700:4700::1111", "family": "ipv6" },
    { "address": "fe80::1", "family": "ipv6" }
  ],
  "txt": { "model": "example-1", "id": "abc123" },
  "state": "active",
  "first_seen": "2026-01-01T00:00:00Z",
  "last_seen": "2026-01-01T00:05:00Z",
  "ttl_seconds": 120
}

Tombstone (same shape, state: "removed" + removed_at).

Library usage

The model (Record / Address)

Record and Address are plain dataclasses that round-trip the wire form. Address classification is derived from the address value:

from ebus_service_discovery_client import Address, Record

rec = Record.from_json(mqtt_payload)      # bytes or str
rec.topic()                                # -> the retained topic for this record
rec.age_seconds()                          # -> freshness, or None if last_seen absent
rec.is_stale()                             # -> True if age > ttl_seconds
rec.is_removed                             # -> True for a tombstone

# routable addresses first, link-local/APIPA last, loopback/unspecified excluded:
for a in rec.candidate_addresses():
    print(a.address, a.family.value, a.scope.value)

a = Address.parse("169.254.1.1")
a.scope          # AddressScope.LINK_LOCAL
a.is_apipa       # True  -> DHCPv4 failed; do not prefer this
a.preference     # sort key: lower is tried first

The resolver (ServiceResolver)

ServiceResolver keeps a live, tombstone-aware view of the bus and resolves a target service to a reachable endpoint. You own the MQTT connection lifecycle; the resolver only subscribes.

from ebus_mqtt_client import MqttClient
from ebus_service_discovery_client import ServiceResolver

mqtt = MqttClient("my-consumer", "127.0.0.1", 1883)
resolver = ServiceResolver(mqtt)
resolver.watch("_http._tcp")
mqtt.start()
# ... let retained records arrive ...

# Resolve a specific instance (match on a TXT field), on port 443 regardless of
# the advertised port:
res = resolver.resolve(
    "_http._tcp",
    match=lambda r: r.txt.get("id") == "abc123",
    port=443,
)
if res:
    url = f"https://{res.host}:{res.port}"   # host is bracketed/zone-qualified as needed
    print(f"reachable via {res.interface}: {url}")
else:
    print("no reachable endpoint")

mqtt.stop()

How resolve() chooses: it gathers every candidate (record, address) for the matching instances, orders them routable-first (by address scope), then by interface priority, then by preferred family, and TCP-probes each in order — binding the probe to the record's interface (SO_BINDTODEVICE) — returning the first that connects. Because it probes, an unreachable IPv4 (an APIPA lease, a dead interface) is simply skipped in favor of a working IPv6; there is no family-specific special-casing.

Constructor options:

Option	Default	Effect
base	local/mdns/discovery/v1	Topic base to subscribe under.
probe_timeout	5.0	Per-candidate TCP connect timeout (seconds).
prefer_family	None	AddressFamily.IPV4/IPV6 as a tie-breaker (never overrides scope).
interface_priority	[]	Ordered interface names to prefer, e.g. ["eth1", "eth0", "wlan0"].

Other methods: records(service_type=None, include_stale=True) snapshots the current view; prune_stale() drops aged-out records; ingest(record) applies a record directly (for non-MQTT feeds or tests).

Schema validation

from ebus_service_discovery_client import load_schema, validate_record

validate_record(record_dict)   # raises jsonschema.ValidationError if invalid
schema = load_schema()         # the bundled draft 2020-12 schema as a dict

validate_record requires the validation extra (jsonschema); the model itself round-trips without it.

CLI usage

Installing the package provides the service-discovery command. Global options select the broker and topic base:

service-discovery [--host H] [--port P] [--base B] [--json] <command> ...
#   --host  MQTT broker host   (default 127.0.0.1)
#   --port  MQTT broker port   (default 1883)
#   --base  topic base         (default local/mdns/discovery/v1)
#   --json  machine-readable output for jq (see below)

--json is global and precedes the subcommand (service-discovery --json dump ...). Every command below shows its default human-readable output; the --json section shows the machine-readable form.

dump — snapshot the retained bus

service-discovery dump                 # everything
service-discovery dump _http._tcp      # one service type
service-discovery dump --interface eth0 --window 3

_http._tcp
  eth0
    Example Device 42  (host-1234.local:80)  age 5m  [active]
      192.168.1.10  (ipv4/private)
      2606:4700:4700::1111  (ipv6/global)
      fe80::1  (ipv6/link-local)

watch — live add / update / remove

service-discovery watch _http._tcp     # Ctrl-C to stop

20:48:17 ACTIVE   _http._tcp/eth0/Example Device 42  [192.168.1.10,fe80::1]
20:49:02 REMOVED  local/mdns/discovery/v1/_http._tcp/eth0/Example%20Device%2042

resolve — reachable endpoint for a service

service-discovery resolve _http._tcp --match id=abc123 --probe-port 443

192.168.1.10:443  via eth0  (ipv4/private)  instance=Example Device 42

Exit code is 0 when resolved, 1 when nothing is reachable.

validate — check records against the schema

service-discovery validate --file record.json     # a record or a list of records
service-discovery validate                        # validate live records off the bus

[0] valid
[1] INVALID: 'removed_at' is a required property
2 record(s), 1 invalid

Exit code is non-zero if any record is invalid.

stats — characterize the live bus

A one-shot summary of what is currently on the bus: totals, per-interface counts, and the service-type breakdown. --json emits the raw characterization dict.

service-discovery stats

discovery bus stats
  base           local/mdns/discovery/v1
  service-types  12
  instances      41
  addresses      63
  stale          0
  size           28114 bytes
  states         active:41
  scopes         global:6, link-local:9, private:48
  families       ipv4:55, ipv6:8

  per interface:
    eth0           38 instances     58 addresses
    wlan0           3 instances      5 addresses

  by service-type:
    _airplay._tcp                     9
    _raop._tcp                        7
    ...

snapshot / diff — soak-test the bus over time

snapshot captures the bus plus metadata (captured_at, base) to a JSON file; diff fuzzy-compares two snapshots. The diff deliberately ignores the volatile timestamps and leads with a plain-language "is this network kinda the same?" verdict, so it is meant for "roughly the same shape?" checks, not exact matches.

service-discovery snapshot -o mon.json          # capture now
# ... hours or days later ...
service-discovery snapshot -o tue.json
service-discovery diff mon.json tue.json        # what changed?

same core but grew (100% retained, +4 instances, 91% overlap)

between snapshots: 1d  (2026-07-16T01:00:00Z -> 2026-07-17T01:12:00Z)

                       OLD       NEW
  service-types         12        13   +1
  instances             41        45   +4
  addresses             63        70   +7
  stale                  0         1   +1
  size (bytes)       28114     30902

  overlap 91%   unchanged 39   changed 2   added 4   removed 0

  + added (4):
      _http._tcp / eth0 / New Printer
      ...

diff accepts a snapshot file or a bare --json dump array on either side, and honors --json for machine output.

--json — machine-readable output

The global --json flag switches every command to structured output you can pipe into jq. Exit codes are unchanged. The shape per command:

Command	--json output
dump	A pretty-printed JSON array of records.
watch	Newline-delimited JSON (one event object per line), for streaming.
resolve	A single JSON object, or null when nothing is reachable.
validate	A JSON array of { "index", "valid", "error" } results.

Each dump/watch record is the wire record enriched for debugging: the schema fields plus a derived scope on every address, plus record-level age_seconds and is_stale. (This debug shape is a superset of the wire contract; do not treat the extra keys as part of it.)

# every address the bus knows, one row per (instance, address), with its scope:
service-discovery --json dump | jq -r '
  .[] | .instance_name as $n | .addresses[] | "\($n)\t\(.address)\t\(.scope)"'

# only instances a resolver would consider stale:
service-discovery --json dump | jq '[.[] | select(.is_stale)] | map(.instance_name)'

# resolve and hand the endpoint straight to curl:
url=$(service-discovery --json resolve _http._tcp --match id=abc123 \
       | jq -r 'if . then "http://\(.host):\(.port)" else empty end')
[ -n "$url" ] && curl -sS "$url"

# stream live changes as ndjson (Ctrl-C to stop):
service-discovery --json watch _http._tcp | jq -c '{ts, verb, topic}'

# CI gate: fail if any retained record is invalid
service-discovery --json validate | jq -e 'all(.valid)' > /dev/null

A dump element looks like:

{
  "schema_version": 1,
  "service_type": "_http._tcp",
  "instance_name": "Example Device 42",
  "hostname": "host-1234.local",
  "interface": "eth0",
  "port": 80,
  "addresses": [
    { "address": "192.168.1.10", "family": "ipv4", "scope": "private" },
    { "address": "fe80::1", "family": "ipv6", "scope": "link-local" }
  ],
  "txt": { "id": "abc123" },
  "state": "active",
  "first_seen": "2026-01-01T00:00:00Z",
  "last_seen": "2026-01-01T00:05:00Z",
  "ttl_seconds": 120,
  "age_seconds": 300.0,
  "is_stale": false
}

Releasing

The version lives in exactly one place: __version__ in src/ebus_service_discovery_client/__init__.py. pyproject.toml reads it dynamically, the setup.py legacy shim reads it by regex, and the publish workflow refuses to release a tag that disagrees with it. To cut a release:

1. Bump __version__ in src/ebus_service_discovery_client/__init__.py (the only place).
2. Move the CHANGELOG's [Unreleased] entries under a new version heading.
3. Commit, then tag it v-prefixed to match: git tag vX.Y.Z && git push --tags.

Pushing a v* tag runs the publish workflow, which verifies the tag equals v$__version__, builds the sdist and wheel, and publishes to PyPI via Trusted Publishing (OIDC, no stored token).

Contributing

See CONTRIBUTING.md for Discussions, Issues, and pull requests. The library is intentionally vendor- and product-agnostic: it models generic DNS-SD discovery, not any particular device. Changes to the wire contract (record.schema.json or the topic layout) affect every publisher and consumer — prefer additive changes and align in a Discussion first.

License

MIT License — Copyright (c) 2026 Clark Communications Corporation