edlora 1.0.0

A lightweight cross-language communication protocol for rocketry telemetry over LoRa.

edLoRa Protocol

A lightweight, efficient, binary communication protocol designed for rocketry telemetry over LoRa modules. Supports both standard Linux and ESP32 platforms in C++, and comes with a Python 3 ground station implementation.

Features

• Binary Packing: Completely avoids string processing to keep LoRa bandwidth usage minimal.
• Robust Framing: Dedicated sync bytes, payload length checking, and CCITT CRC-16 checksums ensure data integrity even on noisy RF channels.
• Multi-node addressing: Includes Sender ID and Receiver ID (with 0xFF reserved for Broadcast).
• Message Types: Differentiates traffic types (e.g., GPS, IMU, Altimeter, Commands).
• Embedded Friendly: The C++ implementation avoids dynamic memory allocation entirely, protecting against heap fragmentation on ESP32/Arduino.
• Optional Crypto: Includes a lightweight XOR-cipher wrapper inside edlora_crypto for obfuscating payload bytes. (Easily swappable with AES if actual cryptographic security is required).

Directory Structure

• cpp/: C++ header (edlora.h) and source implementation for ESP32/Linux.
• python/: Python 3.x module (edlora.py) for the Ground Station / decoding logic.
• examples/: Sample usage scripts demonstrating perfect cross-language compatibility.
  • test_linux.cpp and test_python.py demonstrate basic raw packing/unpacking.

Message Types (MsgType)

To allow for structured data, edLoRa categorizes packets using the MsgType byte:

Name	Hex Value	Description
HEARTBEAT	0x00	Simple keep-alive or ping.
GPS	0x01	Latitude, Longitude, Fix Type, Sat count.
ALTIMETER	0x02	Altitude and velocity telemetry data.
IMU	0x03	Raw Accel, Gyro, Mag data.
COMMAND	0x04	Ground-to-vehicle commands or text logs.
SYS_STATE	0x05	System battery, temp, and current flight phase.
ORIENTATION	0x06	Calculated attitude (Quaternions/Euler angles).
EVENT	0x07	Major flight events (Liftoff, MECO, Apogee, Deployment).
ERROR_MSG	0xFE	Faults and system error states.
CUSTOM	0xFF	Freeform binary payloads.

Usage Guide (C++)

Include edlora.h and edlora.cpp in your ESP-IDF or Arduino project.

#include "edlora.h"

using namespace edlora;

void loop() {
    Packet tx_packet;
    tx_packet.sender_id = 0x10;
    tx_packet.receiver_id = 0xFF; // Broadcast
    tx_packet.msg_type = MsgType::GPS;
    tx_packet.seq_num = 1;

    // Option 1: Send raw bytes
    // tx_packet.payload_len = 4;
    // tx_packet.payload[0] = 0xDE;
    // tx_packet.payload[1] = 0xAD;
    // tx_packet.payload[2] = 0xBE;
    // tx_packet.payload[3] = 0xEF;

    // Option 2: Send strings effortlessly
    tx_packet.set_payload_string("Rocket Stage 1 separated!");

    // Optional Crypto:
    // crypto::XorCipher cipher(0xAA);
    // cipher.process(tx_packet);

    // Pack for transmission
    uint8_t tx_buffer[256];
    int packed_size = Protocol::pack(tx_packet, tx_buffer, sizeof(tx_buffer));

    if (packed_size > 0) {
        // Send tx_buffer[0 ... packed_size-1] over your LoRa modem
        // LoRa.beginPacket();
        // LoRa.write(tx_buffer, packed_size);
        // LoRa.endPacket();
    }
}

// Example: Receiving in C++
void receive_example(uint8_t* rx_buffer, size_t length) {
    Packet rx_packet;
    
    // Unpack incoming bytes
    if (Protocol::unpack(rx_buffer, length, rx_packet)) {
        char str_buffer[256];
        rx_packet.get_payload_string(str_buffer, sizeof(str_buffer));
        
        // Use your received data!
        // Serial.printf("Received string: %s\n", str_buffer);
    }
}

Usage Guide (Python)

from edlora import Packet, MsgType
from edlora_crypto import XorCipher

# Assume `rx_bytes` is the raw byte array received from Ground Station LoRa
rx_bytes = b'\xed\x10\xff\x01\x01\x04\xde\xad\xbe\xef\x00\xb1'

try:
    packet = Packet.unpack(rx_bytes)
    
    # Optional Crypto decoding:
    # cipher = XorCipher(0xAA)
    # packet = cipher.process(packet)
    
    # Retrieve raw bytes
    print(f"Payload (Bytes): {packet.payload}")
    
    # Retrieve as a decoded string
    print(f"Payload (String): {packet.get_payload_string()}")
except ValueError as e:
    print(f"Packet corrupted or rejected: {e}")


# Example: Transmitting from Python
tx_packet = Packet(
    sender_id=0xFF,   # Ground station ID
    receiver_id=0x10, # Rocket ID
    msg_type=MsgType.COMMAND,
    seq_num=42
)

tx_packet.set_payload_string("DEPLOY PARACHUTE")
bytes_to_send = tx_packet.pack()

# Send `bytes_to_send` over your serial/USB LoRa module!
# serial_port.write(bytes_to_send)