energymeter2mqtt 0.6.1

Get values from modbus energy meter to MQTT / HomeAssistant

energymeter2mqtt

Get values from modbus energy meter to MQTT / HomeAssistant

Energy Meter -> modbus -> RS485-USB-Adapter -> energymeter2mqtt -> MQTT -> Home Assistant

The current focus is on the energy meter "Saia PCD ALD1D5FD" However, the code is kept flexible, so that similar meters can be quickly put into operation.

Quick start

Overview:

• Clone the sources
• Create your config: ./cli.py edit-settings
• Test: ./cli.py print-values
• Setup and start MQTT publishing: sudo ./cli.py systemd-setup

Note: It's a good idea to use the /dev/serial/by-id/{your-device-id} path as serial port, instead of /dev/ttyUSB1 Call udevadm info -n /dev/ttyUSB* to get information about all USB serial devices and ls -l /dev/serial/by-id/ to see the existing links.

~$ git clone https://github.com/jedie/energymeter2mqtt.git
~$ cd energymeter2mqtt
~/energymeter2mqtt$ ./dev-cli.py --help

usage: ./cli.py [-h]
                {debug-settings,edit-settings,print-definitions,print-registers,print-values,probe-usb-ports,publish-l
oop,systemd-debug,systemd-remove,systemd-setup,systemd-status,systemd-stop,version}



╭─ options ──────────────────────────────────────────────────────────────────────────────────────────────────────────╮
│ -h, --help        show this help message and exit                                                                  │
╰────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╯
╭─ subcommands ──────────────────────────────────────────────────────────────────────────────────────────────────────╮
│ {debug-settings,edit-settings,print-definitions,print-registers,print-values,probe-usb-ports,publish-loop,systemd- │
│ debug,systemd-remove,systemd-setup,systemd-status,systemd-stop,version}                                            │
│     debug-settings                                                                                                 │
│                   Display (anonymized) MQTT server username and password                                           │
│     edit-settings                                                                                                  │
│                   Edit the settings file. On first call: Create the default one.                                   │
│     print-definitions                                                                                              │
│                   Print RAW modbus register data                                                                   │
│     print-registers                                                                                                │
│                   Print RAW modbus register data                                                                   │
│     print-values  Print all values from the definition in endless loop                                             │
│     probe-usb-ports                                                                                                │
│                   Probe through the USB ports and print the values from definition                                 │
│     publish-loop  Publish all values via MQTT to Home Assistant in a endless loop.                                 │
│     systemd-debug                                                                                                  │
│                   Print Systemd service template + context + rendered file content.                                │
│     systemd-remove                                                                                                 │
│                   Stops the systemd service and removed the service file. (May need sudo)                          │
│     systemd-setup                                                                                                  │
│                   Write Systemd service file, enable it and (re-)start the service. (May need sudo)                │
│     systemd-status                                                                                                 │
│                   Display status of systemd service. (May need sudo)                                               │
│     systemd-stop  Stops the systemd service. (May need sudo)                                                       │
│     version       Print version and exit                                                                           │
╰────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╯

start development

~$ git clone https://github.com/jedie/energymeter2mqtt.git
~$ cd energymeter2mqtt
~/energymeter2mqtt$ ./dev-cli.py --help

dev CLI

usage: ./dev-cli.py [-h]
                    {coverage,create-default-settings,install,lint,mypy,nox,pip-audit,publish,test,update,update-readm
e-history,update-test-snapshot-files,version}



╭─ options ──────────────────────────────────────────────────────────────────────────────────────────────────────────╮
│ -h, --help        show this help message and exit                                                                  │
╰────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╯
╭─ subcommands ──────────────────────────────────────────────────────────────────────────────────────────────────────╮
│ {coverage,create-default-settings,install,lint,mypy,nox,pip-audit,publish,test,update,update-readme-history,update │
│ -test-snapshot-files,version}                                                                                      │
│     coverage      Run tests and show coverage report.                                                              │
│     create-default-settings                                                                                        │
│                   Create a default user settings file. (Used by CI pipeline ;)                                     │
│     install       Install requirements and 'energymeter2mqtt' via pip as editable.                                 │
│     lint          Check/fix code style by run: "ruff check --fix"                                                  │
│     mypy          Run Mypy (configured in pyproject.toml)                                                          │
│     nox           Run nox                                                                                          │
│     pip-audit     Run pip-audit check against current requirements files                                           │
│     publish       Build and upload this project to PyPi                                                            │
│     test          Run unittests                                                                                    │
│     update        Update dependencies (uv.lock) and git pre-commit hooks                                           │
│     update-readme-history                                                                                          │
│                   Update project history base on git commits/tags in README.md Will be exited with 1 if the        │
│                   README.md was updated otherwise with 0.                                                          │
│                                                                                                                    │
│                   Also, callable via e.g.:                                                                         │
│                       python -m cli_base update-readme-history -v                                                  │
│     update-test-snapshot-files                                                                                     │
│                   Update all test snapshot files (by remove and recreate all snapshot files)                       │
│     version       Print version and exit                                                                           │
╰────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╯

History

• v0.6.1
  • 2025-09-13 - Apply manageprojects updates
• v0.6.0
  • 2025-04-22 - Update ha-services from v0.6 to v2.10
• v0.5.0
  • 2025-04-22 - Switch pip-tools to uv
  • 2024-09-06 - Update requirements
• v0.4.0
  • 2024-09-04 - "retry_on_empty" -> "retries"
  • 2024-09-04 - update project via manageprojects

Expand older history entries ...

• v0.3.0
  • 2024-07-12 - bugfix packaging
  • 2024-07-12 - Bugfix wrong path loading definitions
  • 2024-07-12 - Update requirements adn split CLI code
  • 2024-02-22 - Update requirements
  • 2024-01-01 - Update README.md
• v0.2.0
  • 2023-08-29 - NEW command "probe-usb-ports"
  • 2023-08-29 - update requirements
  • 2023-08-29 - Remove nonsens doc string
• v0.1.2
  • 2023-08-10 - adjust scale factor for double registers
  • 2023-06-27 - fix: adjust scale factor for double registers
• v0.1.1
  • 2023-08-10 - Use https://github.com/jedie/cli-base-utilities
  • 2023-08-04 - Update requirements
• v0.1.0
  • 2023-05-21 - fix README example
  • 2023-05-21 - README
  • 2023-05-21 - Bugfix unit of "Power Factor (cos phi)"
  • 2023-05-21 - Bugfix systemd config
  • 2023-05-21 - Add logging to get_ha_values()
  • 2023-05-21 - fix wait
  • 2023-05-21 - Bugfix endless loop prints
  • 2023-05-21 - Bugfix voltage scale
  • 2023-05-21 - Publish all values via MQTT to Home Assistant in a endless loop.
  • 2023-05-21 - Fix CI
  • 2023-05-21 - More info in README
  • 2023-05-21 - Split commands
  • 2023-05-21 - Split CLI and use toml settings for energy meter modbus info
  • 2023-05-21 - Working "serial-test" with Saia PCD ALD1D5FD
  • 2023-04-28 - WIP: Test Serial connection
  • 2023-04-30 - Update README.md
  • 2023-04-28 - first commit