evalproof
Treat LLM evaluation as measurement. Calibrate the judge, correct its pass rate, and gate CI on regressions that are real rather than noise.
Try it in the browser: evalproof.streamlit.app. Check whether a drop between two runs is real, or replay the run below and read the twelve answers that changed. It runs this repository's code; after a quiet spell it takes about half a minute to wake.
An LLM judge is a classifier with error rates. If it passes bad answers at rate FPR and
good answers at rate TPR, its pass rate converges to FPR + (TPR − FPR) · p, not to the
true rate p. That is classify-and-count, and it is biased the way any classifier's count
is — the effect is worked through with a seeded simulation in
The classifier was 95% accurate. The trend it counted was a third too flat
(lab).
evalproof:
- measures the judge against a small gold-labelled sample — confusion matrix, TPR, FPR, Cohen's κ;
- corrects its pass rate with adjusted classify-and-count and prediction-powered inference, each with a confidence interval;
- compares runs on paired cases — exact McNemar for pass/fail, paired bootstrap for scores;
- gates CI only when a drop is both larger than your tolerance and statistically significant, plus latency and cost budgets, with distinct exit codes.
It is local-first: Ollama is the default, every major hosted provider is one target: line
away (Providers), and every model call is cached by content so re-runs are free
and reproducible.
Install
pip install evalproof # or: uv add evalproof
uv tool install evalproof # just the CLI
Python 3.11 to 3.14. compare, calibrate and report work on run files and need no
model. run needs a system to evaluate: a Python function, an HTTP endpoint, a local model
(Ollama, vLLM, LM Studio, llama.cpp), or a key for a hosted provider.
What it found on a real run
A local qwen3:1.7b product support assistant, judged by qwen3:8b, 83
questions, one Apple M5. Full method and every table in MEASUREMENTS.md.
| Question | Measured |
|---|---|
| How good is the 8B judge? | TPR 92.6%, FPR 6.7%, Cohen's κ 0.78 against the answer key |
| Did swapping the grounded prompt for a "friendly" one regress quality? | −4.8 pts on the judge, 8 cases worse vs 4 better, McNemar p = 0.39 — gate warns, does not fail; a delta-only gate would have failed it |
| What did regress? | p95 latency, 1,469 → 4,422 ms; mean answer 19 → 77 tokens. A 2,500 ms budget fails the change with exit 3 |
| Does correcting the judge's rate help? | On average yes (offset 4.8 → ~3.8 pts), but with 30 labels the interval doubles; at 83 cases the judge's bias is smaller than its own noise |
| Was the gold trustworthy? | No: of 13 judge–key disagreements the key was wrong 7 times, the judge 4. Most of the "bias" corrected was the gold's |
| Is pairwise judging safer? | No: 42% of verdicts flipped with the order of the two answers, and the judge preferred the candidate 42 to 6 — mostly where both answers were right and the candidate's was five times longer |
| Does a reasoning judge help? | Against audited labels, yes: thinking on passed no wrong answer (three without it) and κ rose from 0.86–0.88 to 0.90–0.94, at 6.7× the judge time. Against the raw answer key it looked worse, because the key is wrong on exactly those cases. The gate's decision did not change |
| Is it reproducible? | 20/20 identical outputs and verdicts with the cache off; a warm-cache re-run took 0.05 s instead of 363 s; a re-judge three days later matched 83/83 |
Five-minute quickstart
In your own repository, one command writes a starter suite, a CI workflow and an agent skill, and a second runs it:
uvx evalproof init
uvx evalproof run evals/suite.yaml --out evals/runs/latest.json
init picks the judge from what is on your PATH: a logged-in claude, then codex, then
Ollama, then a hosted Anthropic model with ANTHROPIC_API_KEY. It writes evals/ (the
suite, three sample cases, a README), .github/workflows/evalproof.yml (--ci keyless, the
default, makes no model calls in CI; --ci api-key runs the suite there; --ci none writes
no workflow) and a skill for coding agents at .agents/skills/evalproof/SKILL.md and
.claude/skills/evalproof/SKILL.md (--no-skill skips it). It prints one line per file,
never overwrites one without --force, and makes no model call. Replace the sample cases
with your own: the gate needs 20 before it will decide.
The offline example lives in the repository:
git clone https://github.com/technobasant/evalproof && cd evalproof
uv sync
# Offline: no model, no network. Four versions of a ticket router.
for v in baseline regressed noisy refactored; do
uv run evalproof run examples/deterministic/suite.yaml \
--system "python:router:${v}_route" --out "runs/$v.json" --quiet
done
uv run evalproof compare runs/baseline.json runs/regressed.json \
--suite examples/deterministic/suite.yaml --gate; echo "exit $?" # 1: real regression
uv run evalproof compare runs/baseline.json runs/noisy.json \
--suite examples/deterministic/suite.yaml --gate; echo "exit $?" # 0: 2 of 60 is noise
examples/retrieval runs the same gate on a retrieval change: recall@5
does not move when the top hit drops to rank 5, while MRR and nDCG@5 do, and the gate fails
it. It was contributed by @HarshRajSinghania, and CI
checks its exit codes too.
With Ollama installed, the LLM example is
examples/support-qa (ollama pull qwen3:1.7b and
ollama pull qwen3:8b; about 6–10 minutes per run on an Apple M5).
The browser app in app/ runs locally too:
uv run --with-requirements app/requirements.txt streamlit run app/streamlit_app.py.
Commands
| Command | What it does |
|---|---|
evalproof init |
write a starter suite, a CI workflow and an agent skill; no model call |
evalproof run SUITE |
run the suite and write a run file; --gate applies the baseline-free checks (min_pass_rate, must_pass); --show N lists N failed cases |
evalproof compare BASE CAND |
compare two runs on paired cases; --gate turns the result into an exit code; --show N prints both answers for N regressed cases |
evalproof verify RUN SUITE |
check, with no model call, that a run file was made with this suite, covers exactly the dataset's cases as they are now, and has the scores its deterministic scorers give the stored outputs |
evalproof rehash RUN SUITE |
add per-case hashes to a run file written before 0.5, from the dataset it scored; no model call |
evalproof report RUN |
print a run file's report |
evalproof import FORMAT FILE |
turn another tool's results into a run file |
evalproof calibrate RUN |
measure the judge against gold labels and correct its pass rate |
evalproof pairwise A B |
judge two runs head to head, in both orders |
evalproof doctor [SUITE] |
check the agent CLIs a suite uses; no model call |
Providers
The target is <provider>:<model>; the model name is everything after the first colon, so
openrouter:anthropic/claude-sonnet-4.5 and ollama:qwen3:8b both work. Two native adapters
(ollama, anthropic) and one OpenAI-compatible adapter driven by a table of provider
profiles (providers/profiles.py, each row cites the
provider's documentation). Plain HTTP throughout, no vendor SDK. Two more targets run a coding
agent you already have logged in, claude-code and codex: see
Use your Claude Code or Codex login. Three experimental
ones run OpenCode, Cursor and GitHub Copilot the same way: see
Experimental providers.
| Provider | Example target | Key variable | Where |
|---|---|---|---|
ollama |
ollama:qwen3:8b |
none | local |
vllm |
vllm:meta-llama/Llama-3.1-8B-Instruct |
VLLM_API_KEY, optional |
local |
lmstudio |
lmstudio:qwen3-8b |
optional, via api_key_env |
local |
llamacpp |
llamacpp:qwen3-8b |
LLAMA_API_KEY, optional |
local |
anthropic |
anthropic:claude-sonnet-4-5 |
ANTHROPIC_API_KEY |
hosted |
openai |
openai:gpt-5 |
OPENAI_API_KEY |
hosted |
azure |
azure:<deployment> |
AZURE_OPENAI_API_KEY |
hosted, needs base_url |
gemini |
gemini:gemini-2.5-flash |
GEMINI_API_KEY |
hosted |
mistral |
mistral:mistral-large-latest |
MISTRAL_API_KEY |
hosted |
groq |
groq:llama-3.3-70b-versatile |
GROQ_API_KEY |
hosted |
together |
together:meta-llama/Llama-3.3-70B-Instruct-Turbo |
TOGETHER_API_KEY |
hosted |
fireworks |
fireworks:accounts/fireworks/models/llama-v3p3-70b-instruct |
FIREWORKS_API_KEY |
hosted |
deepseek |
deepseek:deepseek-chat |
DEEPSEEK_API_KEY |
hosted |
xai |
xai:grok-4 |
XAI_API_KEY |
hosted |
openrouter |
openrouter:anthropic/claude-sonnet-4.5 |
OPENROUTER_API_KEY |
hosted |
cerebras |
cerebras:gpt-oss-120b |
CEREBRAS_API_KEY |
hosted |
openai-compatible |
openai-compatible:<model> |
optional, via api_key_env |
any server, needs base_url |
claude-code |
claude-code:haiku |
none: your Claude Code login | local CLI, see below |
codex |
codex:gpt-6-luna |
none: your ChatGPT login | local CLI, see below |
opencode |
opencode:ollama/qwen3:8b |
none: OpenCode's own login, per model provider | local CLI, experimental |
cursor |
cursor:auto |
none: your Cursor login | local CLI, experimental |
copilot |
copilot:auto |
none: your GitHub Copilot login | local CLI, experimental |
system:
target: openai-compatible:gpt-4o # a gateway, LiteLLM proxy, TGI, SGLang, ...
base_url: https://llm-gateway.internal/v1
api_key_env: TEAM_GATEWAY_KEY # the variable to read; the key itself never goes in the suite
headers: {x-team: search} # extra HTTP headers on every call, never secrets
params: {max_tokens: 2048}
base_urloverrides any profile's default (a regional endpoint, a proxy, an olderllama-server, which listened on port 8080 before October 2026 and now defaults to 9931).api_key_envreplaces the profile's variable for any provider; a variable named there must be set.headersmerge into every request and win over the adapter's own, for exampleanthropic-version. They are not part of the cache key, and a suite file is usually committed, so keep keys in the environment.- Sampling: local servers (
ollama,vllm,lmstudio,llamacpp) receivetemperatureandseedon every call, defaults included, so a local run repeats. Hosted providers receive them only whenparamssets them, because reasoning models reject a non-default temperature; Anthropic never receives a seed, and since its current models also rejecttemperature, it gets one only when the suite asks.params.extraadds any other body field, such as{thinking: {type: adaptive}, output_config: {effort: low}}. - Thinking models spend output tokens on thinking inside
max_tokens, which defaults to 512 (changing it would change every cache key). Setparams.max_tokenshigher for them; a reply cut off before its first word, a refusal, or a content-filter block is recorded as that case's error rather than as an empty answer. - AWS Bedrock and Google Vertex AI sign requests with cloud credentials, which evalproof does
not implement. Use a gateway's OpenAI-compatible endpoint through
openai-compatible.
Use your Claude Code or Codex login
If Claude Code or Codex is already logged in on your machine, either can be the judge or the system under test, with no API key:
judge:
target: claude-code:haiku # an alias (haiku, sonnet, opus) or a full model id
system:
target: codex:gpt-6-luna
concurrency: 4
Run evalproof doctor suite.yaml first. It prints each CLI's path, version, login mode and
the isolation flags it will pass, and exits 1 if a target of the suite is not usable. Without a
suite it surveys every CLI it knows that is installed, and exits 1 only when none is usable. It
makes no model call.
evalproof runs your own claude or codex binary as a subprocess, sends the prompt on stdin
and reads the JSON it prints. It never reads a token file or the keychain. The environment
variable EVALPROOF_CLI_AUTH says which credentials the CLI uses:
login(the default, also when it is unset or empty) removes the CLI's key variables from the call (ANTHROPIC_API_KEYandANTHROPIC_AUTH_TOKENfor Claude Code,OPENAI_API_KEYandCODEX_API_KEYfor Codex), so the login is what gets used.api-keyleaves them in place, so the CLI uses its own key. This is the route for CI.- Any other value is an error.
api_key_env in the suite works in either mode and wins: it passes that variable to the CLI as
its own key variable. The mode is not part of the run's fingerprint or the cache key, because
it is the same model either way. evalproof doctor prints the mode in effect and warns when
api-key is chosen but the CLI's key variable is not set.
- Isolation is a requirement, not an option. A coding agent is not a model endpoint. Left
alone it loads the project's
CLAUDE.mdorAGENTS.md, your memory, plugins, MCP servers and skills into the prompt, and it can run commands. A judge that has read your project's instructions is not a judge. So every call runs in a fresh empty directory, with the agent's own system prompt replaced by yours (or one neutral line), its tools, settings, MCP servers and skills switched off, and no permission-bypass flag.evalproof doctorprints the exact flags. The two CLIs do not isolate equally well:- Claude Code is run with no tools at all (
--tools ''). - Codex runs in a read-only sandbox with its shell, plugins, apps, hooks, multi-agent mode,
sleep and image tools, bundled skills and your user config and rules switched off, but
codex-cli 0.167.2 has no flag that removes every tool. Still offered are a JavaScript
isolate (
exec: no Node, no file system, no network, with a few built-in helpers such as the current time, MCP resource listing andapply_patch), sub-agents that get the same restricted tools, and a question to the user, which cannot be answered in exec mode. Any tool use fails the call: if the output holds an item that is not a message, reasoning, an error or a plan, evalproof raisescodex used a tool (<type>); isolation brokenand discards the reply. A codex too old to know a flag evalproof sets exits withUnknown feature flag, and evalproof says to upgrade it (it was tested with codex-cli 0.167.2).
- Claude Code is run with no tools at all (
- No temperature, seed or token limit. Neither CLI exposes one, so
temperature,seedandmax_tokensare ignored.thinkmaps to Codex's reasoning effort (falseislow,trueismedium;params.extra.reasoning_effortsets it directly). A run is therefore not repeatable the way a seeded local run is, so the run records the CLI, its version, the isolation scheme and the model id that actually answered. The cache does not key on the CLI version, so a CLI that updates itself keeps its cached replies;--no-cacheasks again. To see how much a judge wobbles, score the same outputs twice with--no-cache, or calibrate it against labels. - A changed judge is not comparable.
compareand the gate refuse (exit 4) when the judge's target, CLI, isolation or resolved model differs between the two runs, because the scores then come from a different instrument. Pass--allow-judge-changeor setgate.allow_judge_change: trueto accept it. A new judge CLI version alone only warns, since the resolved model is what decides whether the instrument changed; so does a changed system target or CLI version, since that is usually the change under test. Runs written before 0.4.0 carry none of these keys and compare as before. - Latency and cost. A call takes about 1.4 s on
claude-code:haikuand about 4 s on Codex, mostly start-up, so setconcurrency. There is no API bill; the calls count against your subscription's usage limits.claude-codealso reports a cost for each call (total_cost_usd), and when the suite gives nopricingfor that target the run records it as the call's cost, somax_cost_usdand the report's cost total work. Under a subscription login this is the CLI's API-equivalent estimate, not a bill: nothing is charged to you for it. Apricingblock in the suite, when it has non-zero prices, takes precedence. Judge calls count too, retries included. - Terms. OpenAI documents Codex CLI use on a ChatGPT plan, including automation.
Anthropic's terms allow a user to run the unmodified Claude Code binary on their own
subscription; its plan limits assume ordinary individual use, and it forbids third-party
products from routing other users' requests through subscription credentials. evalproof
never touches credentials: it runs your own
claudebinary, on your machine, for your own evals. For CI or team-wide use, use an API key (EVALPROOF_CLI_AUTH=api-key, orapi_key_env). See Anthropic's legal and compliance page. Nothing uses a CLI unless a suite names aclaude-code:orcodex:target (or an experimental one, below).
Experimental providers
opencode:, cursor: and copilot: follow the same rules as the two above: your own logged-in
binary, run as a subprocess in a fresh directory in the system temp directory (empty but for
Cursor's permission file), its API-key variable removed from the child's environment unless
api_key_env names one, a bounded runtime, and the CLI, its version and an isolation tag
(opencode/0, cursor/2, copilot/2) in the run and in the cache key. They are experimental
because their isolation is less proven than Claude Code's and Codex's. Each prints
evalproof: <name> provider is experimental on stderr the first time it is used in a process.
Like the other two they ignore temperature, seed and max_tokens, and evalproof doctor
without a suite lists each of them whose binary is on PATH. One difference from the two
above: Cursor and Copilot have no system-prompt option, so they keep their own agent system
prompt and your system text goes in front of the prompt under a heading, as an instruction in
the user turn. What was checked, and what was not:
-
opencode:<provider>/<model>runsopencode run --standalone --archived --format jsonwith a custom agent that has every tool off and every permission denied, your system text as that agent's prompt, and project config, the global config directory and the Claude Code compatibility files switched off. The prompt is on stdin. Verified only against local ollama models (qwen3:8b, a handful of calls): no tool event, a canaryAGENTS.mdin the project not read, a canaryAGENTS.mdin the global config directory read by default and not read with these settings, the parser and the error path. Not verified: any hosted model; whether~/.claude/CLAUDE.mdis read (that test was inconclusive); whether the emptyOPENCODE_CONFIG_DIRhides a login stored there; the token counts (input adds cache reads and writes, output adds reasoning, summed per field name). OpenCode has no single login, sodoctorprintsauth: not checked. OnlyOPENCODE_API_KEYis removed from the environment: the key of the model's own provider (ANTHROPIC_API_KEYforopencode:anthropic/...) is left, because naming that provider in the model id is choosing its key, and removing it would break CI.--archivedkeeps a session out of OpenCode's lists but does not delete it, so sessions accumulate in OpenCode's data directory (each run is a private--standaloneserver in a temporary project); prune them yourself. -
cursor:<model>runscursor-agent -p --output-format stream-json --mode ask --trustwith a--workspacethat holds only a.cursor/cli.jsonpermission file (nothing allowed; reads, writes and shell commands denied), and withCURSOR_CONFIG_DIRandCURSOR_DATA_DIRpointed at empty directories in the call's temp root. Verified live on 2026-11-13 with cursor-agent 2026.11.11:- Ask mode has no write or shell tool, but it is not tool-free: it has a read tool that
runs without approval and reads files inside the workspace and outside it by absolute path.
The permission file made every read fail with "Permission denied", inside and outside, but
the model still tries, so the stream carries a
tool_callevent; evalproof fails the call on any such event (cursor used a tool (readToolCall); isolation broken) and discards the reply. The write and shell entries in the deny list are a second guard for later versions; only reads were tested. - Cursor reads instruction files (
AGENTS.md,CLAUDE.md,.cursor/rules) from the workspace and from the directories above it. The workspace is empty and sits in the system temp directory, so nothing is found there unlessTMPDIRpoints inside a project.~/.claude/CLAUDE.mdwas not read. - Your skills list is sent. Cursor puts the names and descriptions of the skills under
your home directory (
~/.claude/skills,~/.cursor/skills,~/.codex/skills,~/.agents/skills, plugin skills) and its own subagents in every prompt. The paths are fixed and no setting turns them off; movingHOMElogs the CLI out. They count as input tokens on every call, anddoctorwarns about it. Verified with a login; withCURSOR_API_KEYit was not tested. - The redirected config and data directories keep the login (it is in the system keychain),
keep each call's chat out of
~/.cursor/chatsand~/.cursor/projects, and mean your own~/.cursor/cli-config.json(and its allow list) is not read. A fresh config directory gets a default allow list withShell(ls), so evalproof writes one that allows nothing.
stream-jsonrather thanjsonbecause the json result joins the model's preamble text ("I'll read the file now.") with the answer and carries no tool events. Token counts come from the result event (output includes reasoning). The model recorded is the one you asked for; the result carries no model id. The prompt is an argument (nothing says the CLI reads stdin), so it is visible inpswhile the call runs and a prompt over 100,000 bytes is refused. The key variable isCURSOR_API_KEY, passed through the environment, never as--api-key.doctorreadscursor-agent aboutfor the login state (statushung) and prints no account. - Ask mode has no write or shell tool, but it is not tool-free: it has a read tool that
runs without approval and reads files inside the workspace and outside it by absolute path.
The permission file made every read fail with "Permission denied", inside and outside, but
the model still tries, so the stream carries a
-
copilot:<model>runscopilot --no-auto-update --no-ask-user --no-custom-instructions --disable-builtin-mcps --available-tools=evalproof-no-tools --output-format json --usage-output-file <tmp>, with the prompt on stdin andCOPILOT_HOMEpointed at an empty directory in the call's temp root. Verified live on 2026-11-13 with copilot 1.0.110:- An empty allow-list (
--available-tools=) is ignored: the model called itsviewtool and read a file. An allow-list of one name that is no tool disables every tool (session.info: Disabled tools: bash, create, edit, glob, grep, ...), and that is what evalproof passes. Anytool.execution*event or tool request in the output also fails the call (copilot used a tool (view); isolation broken); with tools off it never fired live, so that guard is tested only against canned output. No--allow-*flag is ever passed. With no tools the model sometimes writes a made-up tool call and its "result" as plain text; that is reply text, not a tool run, and is scored as such. --no-custom-instructionsworks: without it a canaryAGENTS.md,CLAUDE.mdand.github/copilot-instructions.mdin the working directory were all read; with it none was, nor anAGENTS.mdin the directory above. No skills or MCP servers were offered.- Copilot keeps its own coding-agent system prompt and adds the date and a note that it is not sandboxed; your system text is an instruction in the user turn.
COPILOT_HOMEin the temp root keeps the login (it is in the system keychain) and keeps each call's session, logs and config out of~/.copilot(verified: no new file there after a call). Your own Copilot config, plugins and MCP servers live in that directory, so they are not used either; that follows from the redirect and was not tested separately.- Models and cost: on the test account named models (
gpt-6-luna,claude-haiku-5.5) were rejected with "is not available", and onlycopilot:autoworked; which models you can name depends on your plan and your organisation's policy.autoroutes each call to a model of Copilot's choosing (gpt-6-lunaon one call,mai-code-1.1-flashon another), so the run artifact records every model that answered, notauto, and a suite run onautocan mix models.autoused one premium request per call there; the rate depends on the model and the plan. copilot:automakes a poor judge. The judge's resolved model is part of whatcompareand the gate check: two runs onautooften saw different models, so they are refused as a judge change (exit 4) unless you allow it.doctorwarns about it. Name a model for the judge if your plan allows one.
Token counts are read from the usage file (input already includes cache reads and writes, output includes reasoning); a missing file means 0, never a failure. Only
COPILOT_GITHUB_TOKENis removed;GH_TOKENandGITHUB_TOKENare left becauseghand CI set them for other reasons.doctorprintsauth: not checked. - An empty allow-list (
Concepts
Suite — one YAML file: a JSONL golden set, the system under test, scorers, an optional judge, calibration settings and a gate.
name: support-qa
dataset: cases.jsonl # {"id", "input", "reference", ...extra fields}
system:
target: ollama:qwen3:1.7b # or groq:…, anthropic:…, python:module:func, https://…
system_prompt_file: prompt.md
prompt_template: "{question}"
params: {temperature: 0, seed: 0, think: false}
judge:
target: ollama:qwen3:8b
scorers:
- {name: answer_key, type: regex, params: {any_of_field: accept, none_of_field: reject}}
- {name: judge, type: llm_judge, params: {rubric_file: rubric.md}}
calibration: {judge_scorer: judge, gold_scorer: answer_key, gold_sample: 30}
gate: {metric: judge, max_drop: 0.03, alpha: 0.05, min_cases: 40, max_p95_latency_ms: 2500}
Run — evalproof run suite.yaml writes one self-describing JSON file: every case's
output, latency, tokens and scores, plus the dataset hash, seed, Ollama version and model
digests, and for a claude-code or codex target the CLI, its version and the model that
answered.
Scorers — exact_match, contains, regex (accept/reject answer keys),
json_schema, numeric_tolerance, recall_at_k, mrr, ndcg, and llm_judge: a strict
JSON verdict, one retry on an unparseable reply, and an explicit undecided state that is
counted, never scored as a pass. evalproof pairwise judges two runs head to head in both
orders and reports order-dependent verdicts as ties.
Calibrate — evalproof calibrate run.json --judge-scorer judge --labels gold.jsonl
(human labels) or --gold-scorer answer_key --gold-sample 30:
| Estimate | What it is |
|---|---|
| raw judge pass rate | classify-and-count, Wilson interval |
| gold labels only | the labelled sample alone |
| ACC | (q − FPR) / (TPR − FPR), bootstrap interval over both the judged set and the gold sample |
| PPI | judge mean on unlabelled cases + mean (label − judge) on the gold sample, normal interval |
Compare and gate — evalproof compare baseline.json candidate.json --suite suite.yaml --gate
| Exit | Meaning |
|---|---|
| 0 | pass — possibly with warnings (a big drop that is not significant; a significant drop within tolerance) |
| 1 | quality regression: drop ≥ max_drop and p < alpha; or an absolute check failed (min_pass_rate, must_pass, max_new_failures) |
| 3 | budget breach: candidate p95 latency or cost over the limit |
| 4 | cannot gate, which is not a regression: fewer than min_cases paired cases, a gated metric with no paired scores, the dataset changed and a run predates per-case hashes, the judge changed (unless --allow-judge-change), or verify found the candidate does not match the suite |
| 2 | usage or configuration error (an unknown key in the suite, an unknown --metric); also run when every case errored |
| 130 | interrupted (Ctrl-C) |
The report says "cannot gate" for exit 4 and "fail" only for a regression, and it lists the
ids that regressed on every compared metric (ten per metric, then "and N more"). --show N
(default 5) adds, for that many regressed cases of the gated metrics, both answers and the
candidate scorer's reason in a collapsed block. run and report list failed cases the same
way (--show N, default 10; 0 hides the list).
When the cases change. Every case in a run carries a hash of its content, and compare
pairs two runs by id and hash. A case added since the baseline has no baseline score and is not
compared. A case edited since the baseline (same id, new content) is excluded and listed in the
report, so adding or editing cases never blocks the gate; the baseline catches up when the
change is merged and its run file replaces the old one. Tags label a case and do not change what
the system is asked, so adding or changing a tag is not an edit. A --limit run pairs with a
full baseline on the cases it ran. Only when the dataset differs and one run predates per-case
hashes (written before 0.5) can the cases that stayed the same not be told from the ones that
changed, and the gate exits 4. Fix it without a model call: run
evalproof rehash BASELINE SUITE. That works when the cases the baseline scored are still the
first ones in the dataset, unchanged (cases appended after them are fine), which the
dataset_hash stored in the run file proves. When a case was edited or inserted, rehash on the
dataset the baseline was made from (the base branch, before your change), or re-run the
baseline with 0.5 or newer. Run files from 0.5.0 keep working: they have
no tag-free hash, so pairing falls back to the case hash, which includes tags. A dataset change
is a warning.
Checks without a baseline. The significance test needs a baseline. These do not:
gate:
metric: judge
min_pass_rate: 0.8 # a floor for the candidate; or per scorer: {judge: 0.8, answer_key: 0.9}
must_pass: [critical] # every case with this tag must pass every pass/fail gated metric
max_new_failures: 0 # most cases that may go from pass to fail on a pass/fail metric
min_pass_rate, must_pass and max_new_failures need a pass/fail metric. On a continuous one
min_pass_rate cannot gate (exit 4), max_new_failures is skipped with a warning, and
must_pass fails only an errored or undecided case.
evalproof run suite.yaml --gate applies min_pass_rate and must_pass to the run alone and
exits 1 when one fails (a usage error if the suite sets neither), which is the gate for a first
run. compare --gate applies all three, and the same flags exist there:
--min-pass-rate, --must-pass (repeatable) and --max-new-failures. max_new_failures: 0
suits deterministic scorers, where one case flipping is a real change that the statistics, with
few cases, would call noise. Errored cases count as failures in every one of these checks.
gate: key |
Meaning | Default |
|---|---|---|
metric / metrics |
the scorer(s) to gate; several get a Holm correction | required |
max_drop |
the largest tolerated drop, as a fraction | 0.02 |
alpha |
significance level | 0.05 |
min_cases |
fewest paired cases the gate will decide on | 20 |
max_p95_latency_ms, max_cost_usd |
budgets on the candidate | none |
allow_judge_change |
accept a changed judge | false |
min_pass_rate, must_pass, max_new_failures |
the checks above | none |
Unknown keys are errors everywhere in a suite, not silently ignored: a typo such as
max_drops fails with suite.yaml: gate.max_drops: unknown key (did you mean 'max_drop'?).
The gate checks one metric by default. To gate several, repeat --metric or list them in
the suite; each metric's p-value is then Holm-adjusted for the number of metrics gated, so
the chance of failing a build on noise stays at alpha for the set as a whole, and the
report shows the raw and the adjusted p-value side by side. Metrics that are not gated are
still reported.
gate:
metrics: [judge, answer_key] # one metric: `metric: judge`
max_drop: 0.03
alpha: 0.05
min_cases: 40
evalproof compare baseline.json candidate.json --gate --metric judge --metric answer_key
Import results from other tools
You do not have to run your evals with evalproof to gate them. evalproof import turns the
per-case results another tool wrote into a run file that compare and the gate read:
evalproof import promptfoo output.json --system openai:gpt-5 --out runs/candidate.json
evalproof import inspect logs/task.eval --out runs/candidate.json
evalproof import deepeval .deepeval/.latest_test_run.json --out runs/candidate.json
evalproof import lm-eval results/gpt2/samples_hellaswag_2026-11-12T10-20-30.jsonl --out runs/gpt2.json
evalproof import csv results.csv --system a --out runs/a.json # id,metric,passed,score,...
evalproof import jsonl results.jsonl --wide --id-field case --out runs/a.json # one column per metric
Import each side with the same importer, then gate as usual, for example
evalproof compare runs/baseline.json runs/candidate.json --gate --metric pass. What to know:
- Case ids are stable between runs of the same dataset (they come from the test's inputs, or the tool's own sample id, never from its position), which is what lets two files pair. Each case also carries a hash of its id and input as the tool recorded them, so runs imported by different importers pair no cases and the gate refuses (exit 4) instead of pairing on a coincidence.
- A system error counts as a failure on every metric, as in a native run. Repeats of one case
(epochs, repeated tests) collapse by
--epochs:mean(the default),first,allorany. Undermean,firstandany, a case with at least one repeat that ran is not counted as a system error; its errored repeats still score as failures. - A NaN or infinite score is refused at import, naming the case and metric, because it would make the bootstrap report a significant difference that is not there.
- promptfoo files can hold several providers and
--systempicks one. Inspect.evallogs compressed with zstd need Python 3.14 or newer; otherwise runinspect log convert --to json <file>first. DeepEval's conversational cases are skipped with a warning.
From Python
The CLI is a thin layer over the same functions:
from evalproof import GateConfig, calibrate, compare_runs, decide, load_run
baseline = load_run("runs/baseline.json")
candidate = load_run("runs/candidate.json")
cmp = compare_runs(baseline, candidate) # paired cases: exact McNemar, bootstrap intervals
decision = decide(cmp, GateConfig(metric="judge", max_drop=0.03))
print(decision.status, decision.exit_code, decision.warnings)
report = calibrate(baseline, "judge", gold_scorer="answer_key", gold_sample=30)
for est in report.estimates: # raw judge rate, gold only, ACC, PPI
print(est.method, est.point, est.low, est.high)
The names in evalproof.__all__ are the supported API. Other modules are internal and may
change between minor versions; see the changelog.
Architecture
The architecture diagram is in the README on GitHub.
Decisions
| Decision | Alternative | Why | ADR |
|---|---|---|---|
| Treat the judge as a classifier to be calibrated | Trust the judge's pass rate | Its count is biased by its own error rates, and the bias moves with the true rate | 0001 |
| Local Ollama by default, HTTP-only providers, content-addressed cache | Hosted APIs and vendor SDKs | Reproducible, free to re-run, tied to a model digest; no SDK dependency | 0002 |
| Gate on "large AND significant", on paired cases | "Fail if the score dropped by X" | On a few dozen cases, X-point drops are mostly noise, and a noisy gate gets switched off | 0003 |
| One metric by default; several with Holm correction | Gate every metric at α each | Testing many metrics at α = 0.05 each inflates false failures | 0003 |
| Run a coding-agent CLI as a provider only in isolation, and gate on its fingerprint | Pass the CLI's defaults through, or ignore its version | A CLI that reads your project's instructions is not a judge, and a silent upgrade changes the instrument | 0004 |
| Pointwise verdicts for gating; pairwise as a diagnostic | Pairwise preference for gating | Measured: 42% of pairwise verdicts flipped with answer order, with a strong length preference | MEASUREMENTS §6 |
| numpy and the standard library for statistics | SciPy, statsmodels | Small enough to read and to test against hand-worked values | — |
In CI
The composite action runs compare --gate, appends the report to the job summary, and
fails the job on exit codes 1, 3 or 4:
- uses: technobasant/evalproof@v0.5.1
with:
baseline: eval/baseline.json # produced on main, e.g. as a build artifact
candidate: eval/candidate.json # produced on this branch
suite: eval/suite.yaml
# metric: "judge, answer_key" # optional: gate several metrics, newline- or comma-separated
With a suite, the action first runs evalproof verify on the candidate (set
verify-candidate: "false" to skip it): the run file must have been made with that suite's
system, judge, scorers and seed and cover exactly the dataset's cases as they are now (a tag
change counts, because must_pass reads tags from the run file). A stale file, a --limit run
and an edited case fail the job with exit 4 before any comparison. It also scores the stored
outputs again with the suite's scorers that need no model (exact_match, contains, regex,
json_schema, numeric_tolerance and the retrieval scorers) and fails when a stored score
differs, so a hand-edited deterministic score is caught. It cannot check model-judged scores or
the stored outputs themselves; for pull requests from people you do not trust, review the run
file or use the api-key mode.
This repository's own CI runs the offline example on every commit and asserts that the gate returns 1 for the real regression and 0 for the noisy and refactored candidates.
evalproof init writes one of two workflows. --ci keyless (the default) makes no model
call in CI: developers run the suite on their own login and commit evals/runs/latest.json;
the job takes the baseline from the base branch, verifies the committed run, and gates. It also
warns when files you watch (WATCH, default evals/) changed but the run file did not.
--ci api-key makes the run in CI with a repository secret. It starts on every pull
request (a path filter would leave a required check pending), and its first step compares
against the base branch: when nothing in WATCH changed it says so and runs nothing. Pull
requests from forks get no secrets, so for them it runs nothing and says so. Responses are
cached in evals/.evalproof/cache between runs, keyed on the contents of evals/, so a push
that changes no prompt or case is answered from the cache. The cache is saved right after the
run, before the gate, so a pull request that fails the gate keeps it too.
If the judge is a Claude Code or Codex CLI, evalproof init --ci api-key writes a workflow that
installs the CLI at the version found at init time and runs evals/suite.yaml as it is. The run
step sets EVALPROOF_CLI_AUTH: api-key and the repository secret (ANTHROPIC_API_KEY for
Claude Code, OPENAI_API_KEY for Codex), so the CLI uses that key instead of a login. The
suite names no key and there is no second suite file; a suite with an api_key_env still uses
that variable. The pinned CLI version is advisory: a different version than the baseline's only
warns, and the gate still refuses when the resolved model changes.
How it relates to other tools
promptfoo (open-source, local evals of prompts, models and RAG pipelines with deterministic and model-graded assertions, a GitHub Action, and red teaming), DeepEval (pytest-style LLM tests with research-backed metrics such as G-Eval), Ragas (LLM-driven metrics and experiments for LLM and RAG applications) and Inspect (the UK AI Security Institute's framework for model and agent evaluations, with sandboxed tools and a log viewer) are broad evaluation frameworks.
evalproof is deliberately narrow: it is the measurement layer — how much a judge's verdict is worth, and whether a difference between two runs is real. Its run file is plain, documented JSON, so it can sit beside an existing harness: produce the per-case verdicts however you like, then calibrate and gate here. For promptfoo, Inspect, DeepEval and lm-eval you do not even need to do that: evalproof imports their results.
Limits
- The measurements cover one machine, two small local models, one product domain and 83 cases. They show the method; they are not a benchmark of those models.
- Calibration is only as good as its gold labels — MEASUREMENTS §4 shows a regex answer key being wrong more often than the judge. Use human labels when the decision matters.
- ACC needs both classes in the gold sample and a judge better than chance; PPI needs the gold sample to be random. evalproof reports when either does not hold rather than printing a number.
- The percentile-bootstrap p-value for continuous scores is an approximation; pass/fail metrics use the exact McNemar test.
- Cost tracking needs a price table in the suite for hosted models.
Roadmap
- Stratified gold sampling (by tag) and per-tag calibration.
Project
Changelog · Contributing · Security policy · Code of conduct · How to cite. Releases are published to PyPI from GitHub Actions with trusted publishing, and each file carries a signed provenance attestation.
Licence
Metadata
Release files for evalproof 0.5.1
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | Provenance | Actions |
|---|---|---|---|---|
| evalproof-0.5.1.tar.gz | 237.1 kB | With provenance | Details for evalproof-0.5.1.tar.gz |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Actions Reset |
|---|---|---|---|---|
| evalproof-0.5.1-py3-none-any.whl | Python 3 | none | any | Details for evalproof-0.5.1-py3-none-any.whl |
Total release size: 379.7 kB
Release files / evalproof-0.5.1.tar.gz
| Download URL | evalproof-0.5.1.tar.gz |
|---|---|
| Size | 237.1 kB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
0bf0e7fdc900eef2435eb9fe30b122368a3bdb6e6b4e242107b8782a8da78901
|
|
BLAKE2b-256 checksum How to use checksums |
ee705b902b351b67ba86dd70f8fc0a85a4e32e91c6982a78cfa17ba624dfcd40
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Nov 13, 2026.
Transparency logRelease files / evalproof-0.5.1-py3-none-any.whl
| Download URL | evalproof-0.5.1-py3-none-any.whl |
|---|---|
| Size | 142.6 kB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
956779b7c3daba54f327998357702de8da90faeda3ffb2029db28d466dd63453
|
|
BLAKE2b-256 checksum How to use checksums |
0672fc0c2aa00256d890d49278e2fec0dd08ef4b8e4dffd310e52a1dbcc5f2a7
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Nov 13, 2026.
Transparency logSecurity for evalproof 0.5.1
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
Full provenance
Both files in this release have been uploaded with provenance metadata.
Attestation for evalproof-0.5.1.tar.gz
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Nov 13, 2026.
Transparency logA note on package security
PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.
To learn more about protecting yourself from malicious actors, visit our package security documentation.