faiss-gpu-cu12 1.13.0

A library for efficient similarity search and clustering of dense vectors.

faiss-wheels

This repository is based on kyamagu/faiss-wheels.

Overview

This repository provides scripts to build GPU-enabled wheels for the faiss library. Distributes faiss-gpu-cuXX packages to PyPI using the contents of this repository.

Key Features

• No local CUDA installation required - Dynamically links to CUDA Runtime and cuBLAS libraries from PyPI
• Builds CUDA 11.8+ and CUDA 12.1+ compatible wheels
• Supports Volta to Ada Lovelace architecture GPUs (Compute Capability 7.0–8.9)
• Bundles OpenBLAS in Linux
• Reduces wheel file size through dynamic linking instead of static compilation

Important Requirements

The published faiss-gpu-cuXX packages require proper system setup that cannot be managed by pip. It is your responsibility to prepare a suitable environment:

1. NVIDIA Driver: Your host must have a CUDA-compatible NVIDIA driver installed

   • The minimum driver version depends on the CUDA version that gets installed
   • NVIDIA drivers are backward compatible with older CUDA versions (See CUDA Compatibility Documentation)

2. GPU Architecture: Your GPU must be compatible (Compute Capability 7.0–8.9)

   • Supported: Volta, Turing, Ampere, Ada Lovelace

3. Library Compatibility: If you install multiple CUDA-dependent libraries (e.g., PyTorch) in the same environment, they must link to the same CUDA version

GPU Architecture Support for PyPI Packages

Support Policy for faiss-gpu-cu11 and faiss-gpu-cu12

Note: This is an unofficial, personal development project with limited computational resources. Due to these constraints, comprehensive testing across all NVIDIA GPU architectures is not feasible. The pre-built faiss-gpu-cu11 and faiss-gpu-cu12 packages on PyPI aim to support the same GPU architecture range (Compute Capability 7.0–8.9) as the official Faiss repository.

For Unsupported GPU Architectures

If you have a GPU architecture that is not supported by these pre-built wheels:

1. Official Faiss: Follow the official Faiss repository build instructions
2. Build from Source: Use this repository's code to build wheels for your specific architecture (see Building from Source section)

Installation

The faiss-gpu-cu11 and faiss-gpu-cu12 wheels are available on PyPI. Choose the appropriate version for your CUDA environment.

For CUDA 12

# Install with fixed CUDA 12.1 (requires NVIDIA Driver ≥R530)
pip install 'faiss-gpu-cu12[fix-cuda]'

# Install with CUDA 12.X (X≥1) - allows flexibility but driver requirement varies
pip install faiss-gpu-cu12

Details:

• faiss-gpu-cu12 is built with CUDA Toolkit 12.1 and maintains minor version compatibility
• With [fix-cuda]: Installs exactly CUDA 12.1, requiring NVIDIA Driver ≥R530
• Without [fix-cuda]: Allows any CUDA 12.X (X≥1), driver requirement depends on the actual CUDA version installed
  • For example: CUDA 12.4 requires Driver ≥R550
• Use without [fix-cuda] when integrating with other CUDA-dependent packages (e.g., PyTorch with CUDA 12.4)

System Requirements:

• OS: Linux x86_64 (glibc ≥2.17)
• GPU: Compute Capability 7.0–8.9

For CUDA 11

# Install with CUDA 11.8 (requires NVIDIA Driver ≥R520)
pip install faiss-gpu-cu11[fix-cuda]

# Same as above (CUDA 11.8 is the final version)
pip install faiss-gpu-cu11

Details:

• faiss-gpu-cu11 is built with CUDA Toolkit 11.8
• Both commands install CUDA 11.8 since no newer CUDA 11.X versions exist
• Requires NVIDIA Driver ≥R520

System Requirements:

• OS: Linux x86_64 (glibc ≥2.17)
• GPU: Compute Capability 7.0–8.9

Driver Compatibility Reference

CUDA Version	Minimum Driver Version
CUDA 11.8	≥R520 (520.61.05)
CUDA 12.1	≥R530 (530.30.02)
CUDA 12.2+	Check NVIDIA Documentation

Warning: When installing without [fix-cuda], pip may resolve to a newer CUDA version that requires a newer driver than you have installed. Always verify driver compatibility before installation.

Advanced: Using System CUDA Libraries

If you need to use system-installed CUDA instead of PyPI CUDA packages, you can bypass the automatic CUDA loading:

1. Exclude PyPI CUDA dependencies using your package manager (e.g., uv, pdm)
2. Set environment variable: _FAISS_WHEEL_DISABLE_CUDA_PRELOAD=1
3. Ensure CUDA libraries are accessible via LD_LIBRARY_PATH

Example with uv (workaround):

# In pyproject.toml
[tool.uv]
override-dependencies = [
    "nvidia-cuda-runtime-cu11==0.0.0; sys_platform == 'never'",
    "nvidia-cublas-cu11==0.0.0; sys_platform == 'never'",
]

Versioning

• Follows the original faiss repository versioning (e.g., 1.11.0)
• Patches specific to this repository use postN suffix (e.g., 1.11.0.post1)

Building from Source

Build faiss-gpu-cu11 and faiss-gpu-cu12 wheels using cibuildwheel.

Build Configuration

# Configure build parameters
export NJOB="32"                          # Number of parallel build jobs
export FAISS_OPT_LEVEL="generic"          # Options: generic, avx2, avx512
export CUDA_ARCHITECTURES="70-real;80-real"  # Target GPU architectures

# For builds without GPU testing
export CIBW_TEST_COMMAND_LINUX=""

# For builds with GPU testing (requires NVIDIA Docker)
export CIBW_CONTAINER_ENGINE='docker; create_args: --gpus all'
# Note: GPU testing requires Docker with NVIDIA Container Toolkit configured

Build Commands

# Build faiss-gpu-cu11 wheels
uvx cibuildwheel@2.23.2 variant/gpu-cu11 --output-dir wheelhouse/gpu-cu11

# Build faiss-gpu-cu12 wheels
uvx cibuildwheel@2.23.2 variant/gpu-cu12 --output-dir wheelhouse/gpu-cu12

Wheels will be created in {repository_root}/wheelhouse/gpu-cuXX/.

Build Requirements

• OS: Linux x86_64
• NVIDIA Container Toolkit (if running tests)
• NVIDIA Driver: ≥R530 (if running tests with CUDA 12)