fastmcp-transport-ble 0.0.2

BLE transport for FastMCP clients.

fastmcp-transport-ble

A Bluetooth Low Energy (BLE) client transport for FastMCP.

This project provides a ClientTransport implementation that connects to an MCP server over BLE using GATT writes (client → server) and notifications (server → client). It is intended for scenarios where you want to run an MCP server on a BLE-capable device (embedded board, mobile device, etc.) and interact with it from a Python FastMCP client.

Features

• FastMCP ClientTransport implementation for BLE (powered by bleak)
• Device discovery by BLE address or by advertised service UUID (with optional name hint)
• JSON-RPC message framing over GATT to support payloads larger than a single characteristic write
• Small, testable core for framing/packetization logic

Requirements

• Python 3.10+
• A BLE peripheral that implements the expected GATT service and characteristics (see “BLE GATT Protocol”)
• Supported host platform for bleak (macOS, Windows, Linux; details depend on your BLE adapter and OS)

Installation

python -m pip install fastmcp-transport-ble

Usage

Create a FastMCP client with the BLE transport:

import asyncio
from fastmcp import Client

from fastmcp_transport_ble import BleTransport


async def main() -> None:
    transport = BleTransport(
        address=None,
        name_hint="MCP_Server_BLE",
        scan_timeout_s=10.0,
    )

    async with Client(transport) as client:
        tools = await client.list_tools()
        print([t.name for t in tools])


if __name__ == "__main__":
    asyncio.run(main())

Demo script

There is a minimal demo at:

• examples/list_tools/list_tools.py

Run it directly:

python examples/list_tools/list_tools.py --help
python examples/list_tools/list_tools.py --name-hint MCP_Server_BLE
python examples/list_tools/list_tools.py --address AA:BB:CC:DD:EE:FF

Configuration

BleTransport supports:

• target: a BleTarget object (or use the convenience args below)
• address: connect to a specific device address
• name_hint: substring match against device name (applies when scanning)
• service_uuid: service UUID used for scanning (defaults to SERVICE_UUID)
• rx_char_uuid: characteristic UUID for client writes (defaults to RX_CHAR_UUID)
• tx_char_uuid: characteristic UUID for server notifications (defaults to TX_CHAR_UUID)
• scan_timeout_s: BLE scan timeout (seconds)
• request_mtu: optional MTU request (best-effort; platform-dependent)
• write_with_response: whether to write with response (reliable, but may be slower)

BLE GATT Protocol

This transport expects the peripheral to expose:

• A primary service UUID (default SERVICE_UUID)
• An RX characteristic UUID (default RX_CHAR_UUID) that the client writes to
• A TX characteristic UUID (default TX_CHAR_UUID) that the client subscribes to for notifications

Payloads are UTF-8 JSON strings. Messages are framed into packets with a 1-byte header:

• High 2 bits: packet type (SINGLE, START, CONT, END)
• Low 6 bits: sequence number (mod 64)

Packet formats:

• SINGLE: [header][json-bytes...]
• START: [header][total_len:4 bytes big-endian][chunk...]
• CONT: [header][chunk...]
• END: [header][chunk...]

The maximum payload per packet is derived from the negotiated MTU (minus ATT overhead), with a safety floor and a hard cap.

Development

Run unit tests:

python -m unittest discover -s tests -p "test*.py"

Compatibility notes

• BLE MTU negotiation support varies across platforms and adapters; the transport treats MTU requests as best-effort.
• GATT write/notify throughput can be limited; consider using smaller payloads and fewer concurrent requests if you see timeouts.

Contributing

Issues and pull requests are welcome. Please include:

• OS and Python version
• BLE adapter details (if relevant)
• Peripheral firmware/protocol details (UUIDs, MTU, packet sizes)

License

No license has been specified yet. Add a license file before publishing if you want others to legally reuse and redistribute the project.