ffpipe 0.1.6rc1

FFPipe: A Python tool to apply image processing in any FFmpeg pipeline with automatic video/audio sync!

FFPipe

FFPipe is a simple, yet robust tool that acts as a bridge between FFmpeg and Python, allowing you to process video frames in between. It is designed to be lightweight and easy to use, making it ideal for developers who want to manipulate video streams without diving deep into FFmpeg's complexities. It is built on top of FFmpeg and uses its powerful capabilities to handle video streams, while providing a simple Python interface for processing frames. (ffpipe uses the ffmpeg-python library under the hood)

How It Works

ffpipe leverages FFmpeg’s piping mechanism and seamlessly buffers, transforms, and streams frames, letting developers focus on processing logic while FFmpeg handles the rest.

Designed for simplicity and flexibility, ffpipe requires only a subclass and a process_frame/process_batch method to define custom transformations. Its modular, state-aware architecture keeps video processing clean, efficient, and Pythonic.

The workflow is as follows:

1. The input stream is read and piped to ffmpeg's STDOUT
2. A reader thread reads the frames in the pipe and writes it to the buffer
3. A processing loop (invoked by the run() method):
   1. reads frames from the buffer
   2. processes them
   3. pipes them back to ffmpeg's STDIN
4. The ffmpeg output process reads frames from the STDIN and writes them to the specified output.

Installation

First things first, you need to install FFmpeg on your system. You can find the installation instructions for your platform here. Make sure to add FFmpeg to your system's PATH so that it can be accessed from the command line.

Then you can install ffpipe using pip:

pip install ffpipe

Usage

There are actually two ways to use ffpipe:

1. Subclassing FFPipe: You can subclass the FFPipe class and implement your own processing logic by overriding the process_frame or process_batch method and the run() method will take care of the rest.
2. Using FFPipe directly: You can use the FFPipe class directly and write your whole processing loop instead of calling the run() method (like in method 1).

Subclassing FFPipe

import os
import cv2
import numpy as np
from ffpipe import FFPipe

class FrameFlipper(FFPipe):
    """A simple image processor that flips the image horizontally (1) or vertically (0) or both (-1)."""
    def __init__(self, flip_axis: int = 1, **kwargs):
        super().__init__(**kwargs)  # DO NOT FORGET THIS LINE!
        self.flip_axis = flip_axis

    def process_frame(self, frame: np.ndarray, **kwargs) -> np.ndarray:
        return cv2.flip(frame, self.flip_axis)

    # For efficient batch processing also implement `process_batch`, this is just an example
    def process_batch(self, batch: np.ndarray, **kwargs) -> np.ndarray:
        return np.stack([cv2.flip(frame, self.flip_axis) for frame in batch])

# Initialize and run the FrameFlipper
streamer = FrameFlipper(
    flip_axis=0,  # Flip vertically
    input="path/to/source/video.mp4",
    output="path/to/output/video.mp4",
    output_args={
        "vcodec": "libx264",
        "pix_fmt": "yuv420p",
    },
)

streamer.run(batch_size=1)  # Any batch_size > 1 calls the `process_batch` method instead.

As you can see, you just subclass the FFPipe class for your own image processor streamer and implement the process_frame or process_batch method.

Note: The base FFPipe class takes in a couple of arguments and you should remember to override the __init__ method correctly as above (providing and passing the kwargs to the base constructor with super().__init__(**kwargs))!

Using FFPipe Directly

import cv2
from ffpipe import FFPipe

pipeline = FFPipe(
    input="path/to/source/video.mp4",
    output="path/to/output/video.mp4",
    output_args={
        "vcodec": "libx264",
        "pix_fmt": "yuv420p",
    },
)
pipeline.start()

while True:
    # batch_size = 1 -> np.ndarray(height, width, 3)
    # batch_size > 1 -> np.ndarray(batch_size, height, width, 3)
    frame = pipeline.read(batch_size=1)
    
    if frame is None:
        break
    
    # Do something with the frame
    processed_frame = cv2.flip(frame, 1)
    # Write the processed frame back to the pipeline
    pipeline.write(processed_frame)
    
    # End of stream check
    if pipeline.end_of_buffer:
        pipeline.write(None)
        break

# Gracefully stop the pipeline and ffmpeg processes
pipeline.stop(gracefully=True)

This way you might lose some of the benefits of ffpipe like the progress bar but you can have more control over the processing loop.

For more info, checkout the tutorials.

Customizing FFmpeg's Arguments

Under the hood, ffpipe adds an extra layer in your original ffmpeg pipeline and takes care of how the streams should be piped for your Python app and back to ffmpeg. This means that you can take any existing ffmpeg command and leverage your Python processing logic for it. So in order for ffpipe to work as expected, you must include all those args and filters from your existing ffmpeg command in the ffpipe's constructor.

You can customize FFPipe by passing FFmpeg-compatible arguments as dictionaries for input and output:

• input_args: Controls how FFmpeg reads the input (e.g., start and end timestamps, etc.).
• output_args: Controls how FFmpeg writes the streams to the output (e.g, output format, codec, etc.).
• Filters: Video/Audio filters are applied just before the input stream is piped for processing and can be set using below parameters. (so do not use af or vf in input_args!):
  • video_filters: A dict of video filters with named arguments.
  • audio_filters: A dict of audio filters with named arguments.
• global_args: A list of ffmpeg global args that are not tied to the input/output or a specific stream. e.g, ["-report"]. Note that this is a simple list of strings as they should be passed to ffmpeg so the - prefix and the order are important.

# Considering `CustomPipeline` subclasses `FFPipe`
pipe = CustomPipeline(
    input="input.mp4",
    output="output.mp4",
    input_args={"ss": "10"},  # Start from second 10
    output_args={"vcodec": "libx265", "crf": "28"},  # Change codec
    gloabal_args=["-report"],  # Enable ffmpeg logging to file
    video_filters={"hue": {"s": 0}},  # Convert to grayscale
    audio_filters={"bass": {"g": 10}, "treble": {"g": 5}}  # Boost sound
)

The above configuration corresponds to the following ffmpeg command while applying the custom processing logic defined in CustomPipeline in between:

ffmpeg -ss 10 -i input.mp4 \
       -vf "hue=s=0" \
       -af "bass=g=10,treble=g=5" \
       -vcodec libx265 -crf 28 \
       output.mp4
       -report

Note: If you want to use some crazy and complex args/filters, you must absolutely know what you're doing! Any wrong arg or filter can mess up the whole pipeline which can be hard to debug (setting a proper ffmpeg_log_level is recommended for better verbosity).

Limitations

• Since ffpipe decodes all frames in the pipeline, you cannot use any stream copying args for video, e.g, -vcodec copy (doesn't make sense anyway!).
• There is no support for Python-based processing of the audio stream in ffpipe; The audio is passed through as is. (Only ffmpeg args/filters can be applied to audio)
• ffpipe is limited to a single video stream (first video stream in the input media)!
• The pipe mechanism adds some latency that would make it unsuitable for ultra-low-latency scenarios.
• The video frame rate and the video size is determined internally and cannot be changed in the output. So do not use related args or filters for input (-s, -r).
• Slow processing logic (slower than the video FPS) causes accumulating latency or hiccups in realtime processing scenarios.
• The progress bar only counts the frames read and processed and does not verify if they're actually written to the output or not.
• The internal buffering mechanism does not have a limit by default which can cause memory issues with high resolution videos. Modify buffer_size if needed.
• FFmpeg's hardware acceleration probably does not work since ffpipe needs access to the raw frames.
• Complex filters requiring multiple inputs/outputs are not supported.
• The internal pipe commands do not accept additional args. The pipe works with rawvideo in bgr24 pixel format with the native fps and video size. In certain cases the thread queue size warning might pop-up which can be set with pipe_thread_queue_size.