FlagQuantum MCP Server

An MCP server that gives any MCP-compatible agent local access to the FlagQuantum SDK: build, compile, route, serialize and plan quantum circuits — and run them locally — with no credentials, no outbound network access and no hardware submission.

"Outbound" is the load-bearing word. Every tool here runs in this process and reaches nothing; the server never calls a provider, reads a token or submits a job. It can also listen, so a gateway that connects to its clients rather than launching them can reach it — see Serving over HTTP. An inbound listener is not egress.

Part of FlagQuantum/mcp-servers.

The mcp-name comment above is not decoration: the MCP Registry reads it from this README to verify that whoever publishes the registry entry also controls the PyPI package. Removing it breaks registry publishing.

What it does

Twenty-six tools over stdio or Streamable HTTP. The research tools use the installed FlagQuantum service contract directly; the MCP layer does not reimplement request decoding, estimation, provider routing or scientific validation.

Build and inspect

Parameters

Compile and route

Export and present

Run

Research capability workflow

Four concrete resources include flagquantum://version, flagquantum://gate-set, flagquantum://ir-schema, and the installed research catalog at flagquantum://capabilities/index. Two resource templates expose exact upstream documents without copying them: flagquantum://capabilities/{capability_id}/{version} and flagquantum://schemas/{schema_id}.

Three prompts: build_and_analyze_circuit, compile_for_topology, export_circuit.

These are recipes for the clients that present them to a person — Claude Desktop, the MCP Inspector, a host that turns them into slash commands. An autonomous agent may receive none of them: several recorded sessions could not enumerate them at all, and reported that they could not tell whether prompts existed. So nothing an agent has to know lives only here. Every constraint the prompts state is also in a tool summary, or in the server instructions, or in a resource — the QCIS refusal and the "say what you assumed" rule were the two exceptions, and they are in emit_qcis_tool and bind_parameters_tool now. PROMPT_CONSTRAINTS in tests/test_server_contract.py keeps that true.

Install

pip install flagquantum-mcp-server

This pulls flagquantum, which depends on torch.

Claude Code

claude mcp add flagquantum -- uvx flagquantum-mcp-server

Claude Desktop / Cline

{
  "mcpServers": {
    "flagquantum": {
      "command": "uvx",
      "args": ["flagquantum-mcp-server"]
    }
  }
}

MCP Inspector

npx @modelcontextprotocol/inspector uvx flagquantum-mcp-server

Serving over HTTP

A client that launches a process — Claude Code, Claude Desktop, the Inspector — uses the default stdio transport and needs nothing below. A client that instead connects to servers, such as a gateway holding several of them, needs the server to listen:

flagquantum-mcp-server --transport http --host 0.0.0.0 --port 8105 \
    --allowed-host quantum-mcp:8105

The endpoint is /mcp on that host and port, and it speaks Streamable HTTP.

Binding a non-loopback interface requires --allowed-host. Without it the server refuses to start rather than listen on every interface with nothing checking who reaches it:

$ flagquantum-mcp-server --transport http --host 0.0.0.0
usage: flagquantum-mcp-server [-h] ...
flagquantum-mcp-server: error: --host 0.0.0.0 is not a loopback address, so the
server would answer any Host header that reaches it. Name the hosts it should
answer with --allowed-host HOST[:PORT], or bind 127.0.0.1.

Passing any --allowed-host or --allowed-origin turns host validation on; a request carrying an unlisted Host is answered 421 Misdirected Request. Loopback hosts are always answered, so enabling validation cannot lock out a local client.

Two things worth knowing if you are wiring this up:

• Configure validation through the settings object, not http_app( allowed_hosts=...). That keyword appends to a list which is only consulted once validation is on, so on its own it reads as a security setting and enforces nothing. Measured on fastmcp 3.4.7: a bogus Host is answered 200 with the keyword and 421 through the settings path.
• --transport http adds an inbound socket, not an outbound one. No tool gains a network path; rule 4 in AGENTS.md is unchanged.

Circuit formats

Two input formats are accepted, both of them FlagQuantum's own serialization.

ir (canonical) — FlagQuantum IR JSON, as produced by CircuitIR.to_json(). Versioned, hashable, and rejected if it carries unknown fields:

{
  "kind": "flagquantum.circuit_ir",
  "version": "1.0",
  "n_wires": 2,
  "dtype": "complex64",
  "shape": [4],
  "instructions": [
    {"opcode": "h", "wires": [0], "params": {}, "matrix": null, "metadata": {}},
    {"opcode": "cx", "wires": [0, 1], "params": {}, "matrix": null, "metadata": {}}
  ],
  "observables": [],
  "measurements": [],
  "metadata": {}
}

qir (convenience) — the compact gate list from Circuit.to_qir(), easier to write by hand:

[{"name": "h", "index": [0]}, {"name": "cx", "index": [0, 1]}]

A gate carries its arguments under parameters, which the example above never shows because neither gate takes one:

[{"name": "rz", "index": [0], "parameters": {"theta": 0.5}}]

The two formats use different key names, and this is the most common mistake: the gate list calls a gate name and its wires index, while serialized IR calls them opcode and wires. Sending IR keys as qir is rejected with a message that says so by name. An empty gate list is also rejected, because the wire count is inferred from the highest index — an empty list describes no circuit. A bare integer is accepted for a single-wire gate ("index": 0 means "index": [0]).

Either format can be passed to any tool; serialize_circuit_tool converts qir into canonical ir.

One more naming trap: an IR payload's version field is spelled version, and sending ir_version instead is rejected as an unknown key — but tool results report that same field as ir_version. The payload key and the reported key are not spelled the same way.

circuit_format is a closed set — the JSON schema publishes "enum": ["ir", "qir"], so a wrong value is rejected before any tool body runs. OpenQASM text is not a supported input. FlagQuantum ships emitters but no QASM parser, so there is nothing to convert it with; a caller holding OpenQASM has to load it into FlagQuantum itself and send the resulting IR.

On parameters

A gate parameter is either a number or a symbol, and a symbol is written as a one-key object naming it:

{"name": "ry", "index": [0], "parameters": {"theta": {"$parameter": "theta"}}}

This works in both input formats. A symbol is what makes a circuit an ansatz: inspect_parameters_tool reports it, and bind_parameters_tool substitutes a number for it.

A bare string is not a symbol. {"theta": "theta"} is a value, not a reference; the SDK stores it as one, so the circuit reports itself as unparameterized. Nothing else complains: draw_circuit_tool prints the value it was handed, and a string prints as RY(theta) — indistinguishable from a real symbol — while plan_execution_tool plans the circuit for execution. So the input boundary rejects it, along with a misspelled marker ({"$unknown": ...}) and a non-string symbol name, naming the gate and the parameter. The other encodings a parameter may carry are $expression, $complex and $tensor; a mapping carrying none of those four keys is rejected for the same reason. The flagquantum://ir-schema resource carries a worked parameter_example.

One rough edge, inherited from the SDK: a real symbol is rendered as the SDK's repr of it, so RY(theta) appears as RY(Parameter(name='theta')). FlagQuantum's Parameter defines no __str__, so str() falls through to __repr__. The symbol is intact — only the diagram's spelling is clumsy — and it affects both input formats equally.

Binding is needed to export: the emitters write numbers, and refuse an unbound circuit naming bind_parameters. Nothing else needs it. analyze, optimize, route, draw, describe_layers and plan_execution_tool all accept a parameterized circuit as it stands, because none of them reads a parameter value — a plan is built from the payload's shape and dtype. Bind when you want the emitted text or a concrete circuit to run, not before.

On an explicit unitary

A gate's matrix travels under a key that differs by format: the gate list calls it gate, serialized IR calls it matrix.

[{"name": "any", "index": [0], "gate": [[0, 1], [1, 0]]}]

Two things are rejected rather than half-honoured.

The wrong key for the format. Circuit.from_qir reads gate and ignores matrix entirely, so a gate list spelling it the IR way would be built with no matrix at all — silently. For a built-in name that means a different circuit than the caller wrote, so the key mismatch is named.

A matrix on a built-in opcode. A matrix belongs to any, the opcode FlagQuantum reserves for it. On a built-in name the SDK keeps the matrix in the payload but lets the built-in's own definition win, which splits the tools: analyze_circuit_tool reports the gate under the built-in's name while the emitters refuse to lower it. Name the gate any instead.

On a wire number

Wire numbers must be integers in both formats, and the wires list must be a list. Both are worth stating because the SDK accepts more: it iterates whatever it is handed and calls int() on each element, so "1", true, 1.7 and 0.9 are wires, and "01" is wires 0 and 1 while {"0": 1} is wire 0. The last cases are why this is an error rather than a convenience — a value that means nothing turns into a circuit that looks fine.

On the envelope's own fields

The same rule, applied to the fields outside instructions. n_wires and the entries of shape are read with int(), so "2", 2.7 and true are all a width; dtype is looked up as an attribute on torch, so a value that is not a string reaches an attribute lookup inside the SDK.

The test for what is refused is whether information is lost, not whether the JSON type matches the schema exactly. That is why version: 1.0 is accepted — str(1.0) reproduces it — while n_wires: 2.7 is not: it silently becomes 2, and n_wires: true silently becomes 1.

dtype is checked for being a string here. Which strings are legal stays with the SDK, whose own message names the rule (complex_dtype must be complex64 or complex128), so the two cannot drift apart.

On observables and measurements

Both are lists of objects, empty when the circuit has none, and an entry is short — the SDK fills in the rest on load:

{
  "observables": [{"name": "ZZ", "wires": [0, 1]}],
  "measurements": [{"kind": "counts", "wires": [0, 1], "shots": 1024}]
}

What the SDK stores adds the optional keys and lowercases the observable name, so "ZZ" comes back as "zz" carrying "coefficient": 1.0. coefficient is the term's weight, and it may be a symbol exactly as a gate angle may ({"$parameter": "w"}), which is how a Hamiltonian term carries a variational weight. shots is null when omitted.

An observable is what a VQE ansatz exists to measure, so it is worth knowing that the shape is reachable without being wrong first — flagquantum://ir-schema publishes both forms side by side as observable_example.

On emitted text

emit_openqasm_tool measures every wire unless result_wires names the ones you want, so the emitted program normally carries measurements the source circuit does not — a Bell circuit with no measurements still emits c = measure q;. Declaring measurements in the source IR changes nothing: the emitted text is chosen by result_wires alone. The content_hash in the result identifies the source circuit, not the emitted text. emit_qcis_tool appends nothing.

On content_hash

Every payload carries the SDK's content_hash, which is the SHA-256 of the canonical JSON including the metadata object. An IR payload that omits metadata is legal — it defaults to {} — but it hashes differently from the same circuit carrying its runtime metadata. Treat the hash as identifying the payload, not the gate sequence alone. The flagquantum://ir-schema resource says the same thing where an agent will read it.

Limits

Every bound is overridable by environment variable, so a deployment can tighten them without a code change:

The last one is the only bound on what this server returns rather than what it accepts. A result travels into a model's context rather than into memory, and a sampled result grows with shots — 200,000 draws is legal by every other bound here and far more than an answer.

Errors

There are two layers, and which one answers depends on whether the schema could describe the mistake.

Schema violations are caught by the MCP layer before any tool body runs and come back as a protocol error. That covers a circuit_format outside the enum, a missing required argument, and an argument of the wrong JSON type.

Everything else comes back as a structured envelope, so a caller can branch on the code instead of parsing prose:

{"status": "error", "error": {"code": "LIMIT_EXCEEDED", "message": "..."}}

Codes: INVALID_INPUT, LIMIT_EXCEEDED, UNSUPPORTED_FORMAT, SDK_UNAVAILABLE, INTERNAL_ERROR.

Both layers reach the client as an error it can read; only the layer differs. Nothing escapes as an unhandled exception that would break the transport — a failed call leaves the session usable for the next one, which tests/test_server_process.py asserts over a real stdio connection.

What this server deliberately does not do

• No hardware, no credentials, no outbound network. FlagQuantum's own release 0.2.0 ships no remote-submission entry point, and this adapter adds none. The HTTP transport opens a listening socket and changes nothing about what a tool may do once a request arrives.
• No instruction-level NoiseModel objects. Those are live SDK objects rather than serializable values. Continuous-time evolution instead accepts closed JSON collapse-operator descriptors with physical rates.
• No in-tree coupling. This package must never be imported by the FlagQuantum repository. That project's long-horizon architecture contract names "the main repository has no production MCP transport dependency" as a retirement condition, and its tests/team/services/test_service_boundaries.py fails if mcp or fastmcp becomes importable on the core path. Keeping the gateway out of tree is what that contract asks for.

What it runs, and what that does not prove

plan_evolution_tool and evolve_dynamics_tool use a separate continuous-time contract. A Hamiltonian and observables are Pauli-term lists, the initial state is a basis bitstring or dense state, times are explicit and strictly increasing, and amplitude damping is a physical rate in the Lindblad equation—not a channel probability. The execution tool returns one population row per requested time, trace drift, a bounded-population check, and numerical method/order/step-size/ precision provenance. Both tools are deterministic, local CPU operations with no provider, credentials, hardware, or outbound network access.

simulate_circuit_tool executes circuits in this process: a statevector simulation on CPU. That is the whole of it — no remote target, no provider, no token. It was not always here. Until it landed the server planned and never ran, and the line above used to say so; a real task showed the cost, so the line moved rather than the tool being smuggled in underneath it.

The result says where it ran, in the SDK's own fields rather than in a summary:

"execution": {
  "execution_path": "local_statevector",
  "platform_provider": "pytorch_cpu",
  "mode": "statevector",
  "device": "cpu",
  "accuracy": {"metric": "not_measured", "...": "..."}
}

accuracy.metric is not_measured, and plan_execution_tool reports release_gate_allowed: false for the same circuit. That second field is the plan's, in its summary — the simulation result above carries execution, outputs and status, and its accuracy block has five fields (version, metric, value, tolerance, passed). An ideal simulation of a circuit is a statement about that circuit, not about any device that would run it — the SDK declines to license a stronger reading, and this server does not add one.

Three things are refused rather than reinterpreted, each because accepting would produce a plausible-looking answer:

The width where a full probability distribution stops being returnable is the SDK's own contraction limit, and its message points at a setting this server does not expose. That refusal keeps the SDK's text and adds what a caller can actually do — name a few wires, or ask for counts, which report only the outcomes that occurred.

Measuring an energy

{"kind": "expectation", "pauli": "ZZ"} evaluates one term. A Hamiltonian is a weighted sum, so it takes terms instead:

{"kind": "expectation",
 "terms": [{"pauli": "ZZZZ", "coefficient": 1.0},
           {"pauli": "XIII", "coefficient": -1.0}]}

Each term comes back as its own row, carrying its coefficient and its value, because that is what the SDK computes — it evaluates the sum term by term and does not total it. So ⟨H⟩ is the caller's arithmetic:

energy = sum(row["coefficient"] * row["value"][0] for row in rows)

That is deliberate rather than convenient. A total computed here would be a number the SDK never produced and this server could not attribute, and the per-term rows are what make the result auditable — you can see which term dominated. coefficient appears only on rows the SDK put one on, which means the terms of a weighted expectation.

A coefficient must be a real number. A symbol is refused: Z(0) * Parameter builds a parameter expression rather than an observable, so there is nothing to evaluate — bind the circuit's gates first instead. A single unweighted term is still spelled "pauli": "ZZ", and the two spellings are one code path, so they cannot drift apart.

Lowering an energy

simulate_circuit_tool evaluates an energy. train_parameters_tool improves one, using the exact gradients a statevector simulation reports:

{
  "circuit": "[{\"name\": \"ry\", \"index\": [0], \"parameters\": {\"theta\": {\"$parameter\": \"t0\"}}}]",
  "circuit_format": "qir",
  "hamiltonian": [{"pauli": "Z", "coefficient": -1.0}, {"pauli": "X", "coefficient": 1.0}],
  "steps": 100,
  "learning_rate": 0.1
}

It returns the loss after each step, the parameters it ended on, and the parameters it started from. Call it again with values set to the parameters it returned to continue the run rather than restart it.

The hamiltonian argument is the same term list an expectation output takes, and it is required: without an objective the number being minimised is not an energy. One letter per wire — the circuit above is one wire, so each term is one letter. A two-wire circuit takes "ZZ", and a term whose length does not match the circuit is refused before anything runs.

Two limits are worth knowing before you call it. Training is far more expensive than simulating — measured, a 16-qubit step costs 85 ms against a simulation's few milliseconds — so a run is refused up front when its predicted cost exceeds FLAGQUANTUM_MCP_MAX_TRAIN_SECONDS, with the prediction, the width and the step count in the message. The cost that dominates at the top of the width range is holding the state: the model predicts 25.2 s per step at 24 wires before a single gate is applied, so no 24-wire circuit gets more than two steps, and the layered ansatz measured here — 71 instructions — is predicted at 119 s per step and gets none. That is a statement about the circuit, not the width: one gate at 24 wires is still under the budget, and the budget refuses by prediction rather than by width, so a narrow circuit with many layers is bounded for the same reason — a 2500-instruction four-wire circuit is predicted at 0.5 s per step, which the default budget admits 119 steps at a time where a one-gate circuit at that width gets three thousand.

And the result is what it is: a loss curve and a set of angles. Whether the run converged is your reading, not this tool's claim, and the SDK's accuracy.metric == "not_measured" travels with the execution exactly as it does for a simulation.

Which contracts this rests on

FlagQuantum publishes a frozen stable_exports snapshot (31 names, each with a named verification test), describes flagquantum.compiler as its "stable expert compiler interface", and lets each package declare its own __all__. This server uses all three tiers, and tests/test_api_contract.py pins the members of each:

Tier 3 is the weakest, and it is not decoration. Gate validation needs each gate's wire count and parameter names, and the SDK's operator manifest is the only authority for that — a caller cannot infer it from the circuit format, and reimplementing it here would create a second source of truth that drifts. The manifest is reached through a helper that turns a relocation into a named error rather than an AttributeError inside a tool call, and every tier-3 name is pinned by a test so a move upstream fails the build instead of failing a user. The failures that guard against are quiet ones: a weaker gate check accepts a misspelled parameter and drops it.

The training tool is the one place where the tiers are not the whole story. Its objective needs two names that are not frozen — Hamiltonian and pauli_term, both from flagquantum.algorithms — and one that is: RuntimePolicy is in the frozen snapshot, but the snapshot fixes only the name. Whether the Hamiltonian reaches the run is decided by RuntimePolicy().observable, whose default is "z", so tests/test_api_contract.py pins that default too rather than trusting the snapshot to carry it.

The dependency is pinned to flagquantum>=0.3.1,<0.4. It is a version range, never a git URL: a URL in the dependency table makes every environment that installs a different upstream revision unresolvable.

Capability coverage decisions

contracts/sdk-capability-coverage-v1.json records a decision for every production-supported or release-certified capability in the pinned post-#632 FlagQuantum source manifest. FlagQuantum 0.3.1 is the first published compatible core wheel. A decision either names this server's bounded tool surface or explains why no tool is exposed. The one existing drawing tool is recorded separately as a legacy experimental exception; the ledger does not authorize adding other experimental tools. The CI checker compares these decisions to the pinned upstream capability-maturity.toml and to the server's declared tool surface. A new eligible capability or MCP tool without a decision fails the check.

This ledger is an exposure audit, not a claim that every Python function is available over MCP. It does not replace installed-package compatibility tests: the current flagquantum>=0.3.1,<0.4 dependency is verified separately by the test matrix and clean installed-wheel MCP handshake. A source mapping alone does not authorize a new tool or prove a future FlagQuantum release works.

To inspect the pinned source locally, check out commit 5c78e1d3b3fad31af5bce9e785ca8a1954229cf7 of FlagQuantum and run:

python tools/check_capability_coverage.py --upstream-root /path/to/FlagQuantum

Development

python3 -m venv .venv
.venv/bin/python -m pip install -e ".[dev]"
.venv/bin/ruff check .
.venv/bin/ruff format --check .
.venv/bin/mypy --config-file ../mypy.ini src
.venv/bin/pytest -m "not integration"

See the repository README and CONTRIBUTING.md.

License

Apache-2.0.