flamerite-bt 0.1.1

An unofficial python package for controlling Flamerite fireplace devices via bluetooth

flamerite_bt

An unofficial python package for controlling Flamerite fireplace devices via bluetooth.

While the package is designed to encapsulate the required logic for building a HomeAssistant automation, it can also be used in standalone mode.

Supported devices

The package has been tested with and known to work with a NITRAFlame fireplace.

Other Flamerite devices, provided they are controlled via the eControl app, will likely also work but must be explicitly added to the SUPPORTED_DEVICE_NAMES list in const.py so they can be detected.

Supported features

The following features are supported:

• Turn on/off.
• Select color for flame / fuel.
• Adjust brighness for flame / fuel.
• Adjust thermostat.
• Adjust heat level (off, low, high)

Programmable timers are not yet supported.

Color support for flame/fuel

The device supports 5 palettes with 4 hues in each palette for a total of 20 colors.

In addition, the device also supports 5 color cycling modes. The first 4 just cycle through all available colors whereas the last one only cycles through orange hues.

Using the CLI

The package provides a rudimentary CLI that scans for the presence of supported Flamerite devices, and attempts to connect to the first one it finds. It then provides a small text-based UI for interacting with the device.

To use (you will need to install poetry to manage Python dependencies):

$ poetry install
$ poetry run python cli.py

NOTE: you will need to pair your bluetooth adaptor to the device before you can control it. To do this, once the CLI detects the device and attempts to connect to it, press the physical link button on the device control panel to complete the pairing process.