fms-hf-tuning 0.0.1

FMS HF Tuning

FMS HF Tuning

This repo provides basic tuning scripts with support for specific models. The repo relies on Hugging Face SFTTrainer and PyTorch FSDP. Our approach to tuning is:

1. Models are loaded from Hugging Face transformers or the foundation-model-stack -- models are either optimized to use Flash Attention v2 directly or through SDPA
2. Hugging Face SFTTrainer for the training loop
3. FSDP as the backend for training

Installation

pip install -e .

Note: After installing, if you wish to use FlashAttention, then you need to install these requirements: ''' pip install -e ".[dev]" pip install -e ".[flash-attn]"

[FlashAttention](https://github.com/Dao-AILab/flash-attention) requires the [CUDA Toolit](https://developer.nvidia.com/cuda-toolkit) to be pre-installed.

If you wish to use [aim](https://github.com/aimhubio/aim), then you need to install it:

pip install -e ".[aim]"

## Data format
The data format expectation is a single column text. The trainer is configured to expect a response template as a string. For example, if one wants to prepare the `alpaca` format data to feed into this trainer, it is quite easy and can be done with the following code.

```python
PROMPT_DICT = {
    "prompt_input": (
        "Below is an instruction that describes a task, paired with an input that provides further context. "
        "Write a response that appropriately completes the request.\n\n"
        "### Instruction:\n{instruction}\n\n### Input:\n{input}\n\n### Response:"
    ),
    "prompt_no_input": (
        "Below is an instruction that describes a task. "
        "Write a response that appropriately completes the request.\n\n"
        "### Instruction:\n{instruction}\n\n### Response:"
    ),
}

def format_alpaca_fn(example):
    prompt_input, prompt_no_input = PROMPT_DICT['prompt_input'], PROMPT_DICT['prompt_no_input']
    output = prompt_input.format_map(example) if example.get("input", "") != "" else prompt_no_input.format_map(example)
    output = f"{output} {example['output']}"
    return {"output": output}

ds = datasets.load_dataset('json', data_files='./stanford_alpaca/alpaca_data.json')

alpaca_ds = ds['train'].map(format_alpaca_fn, remove_columns=['instruction', 'input'])
alpaca_ds.to_json("sft_alpaca_data.json")

The response template corresponding to the above dataset and the Llama tokenizer is: \n### Response:".

The same way can be applied to any dataset, with more info can be found here.

Supported Models

Current supported and tested models are Llama2 (7 and 13B configurations have been tested) and GPTBigCode.

Training

Single GPU

# if you want to use one GPU on multi-gpu machine
export CUDA_VISIBLE_DEVICES=0

# MODEL_PATH=meta-llama/Llama-2-7b-hf # Huggingface model id or path to a checkpoint
# TRAIN_DATA_PATH=twitter_complaints.json # Path to the dataset
# OUTPUT_PATH=out # Path to the output folder where the checkpoints are saved

python tuning/sft_trainer.py  \
--model_name_or_path $MODEL_PATH  \
--training_data_path $TRAIN_DATA_PATH  \
--output_dir $OUTPUT_PATH  \
--num_train_epochs 5  \
--per_device_train_batch_size 4  \
--per_device_eval_batch_size 4  \
--gradient_accumulation_steps 4  \
--evaluation_strategy "no"  \
--save_strategy "epoch"  \
--learning_rate 1e-5  \
--weight_decay 0.  \
--warmup_ratio 0.03  \
--lr_scheduler_type "cosine"  \
--logging_steps 1  \
--include_tokens_per_second  \
--packing False  \
--response_template "\n### Response:"  \
--dataset_text_field "output" 

Multiple GPUs with FSDP

The recommendation is to use huggingface accelerate to launch multi-gpu jobs, in particular when using FSDP:

• accelerate is written on top of torch.distributed.run.
• accelerate launch CLI highly similar to torchrun, spawns multiple jobs (one for each gpu).
• tightly integrated with huggingface Trainer.

accelerate launch CLI to be run with specific command line arguments, see example below. Default arguments handled by passing in a --config_file argument; see reference docs and fixtures/accelerate_fsdp_defaults.yaml for sample defaults.

# Please set the environment variables:
# MASTER_PORT=1234 # The port at which the process with rank 0 listens to and should be set to an unused port
# MODEL_PATH=meta-llama/Llama-2-7b-hf # Huggingface model id or path to a checkpoint
# TRAIN_DATA_PATH=twitter_complaints.json # Path to the training dataset
# OUTPUT_PATH=out # Path to the output folder where the checkpoints are saved


```bash
accelerate launch \
--main_process_port $MASTER_PORT \
--config_file fixtures/accelerate_fsdp_defaults.yaml \
--num_processes=8 \ 
--main_process_port=$MASTER_PORT \
tuning/sft_trainer.py \
--model_name_or_path $MODEL_PATH \
--training_data_path $TRAIN_DATA_PATH \
--torch_dtype bfloat16 \
--output_dir $OUTPUT_PATH \
--num_train_epochs 5 \
--per_device_train_batch_size 4 \
--per_device_eval_batch_size 4 \
--gradient_accumulation_steps 4 \
--evaluation_strategy "no" \
--save_strategy "epoch" \
--learning_rate 1e-5 \
--weight_decay 0. \
--warmup_ratio 0.03 \
--lr_scheduler_type "cosine" \
--logging_steps 1 \
--include_tokens_per_second \
--packing False \
--response_template "\n### Response:" \
--dataset_text_field "output"

LoRA Tuning Example

python tuning/sft_trainer.py \
--model_name_or_path $MODEL_PATH \
--training_data_path $TRAIN_DATA_PATH \
--output_dir $OUTPUT_PATH \
--num_train_epochs 40 \
--per_device_train_batch_size 4 \
--per_device_eval_batch_size 4 \
--gradient_accumulation_steps 4 \
--save_strategy "epoch" \
--learning_rate 1e-4 \
--weight_decay 0. \
--warmup_ratio 0.03 \
--lr_scheduler_type "cosine" \
--logging_steps 1 \
--include_tokens_per_second \
--packing False \
--response_template "\n### Label:" \
--dataset_text_field "output" \
--use_flash_attn False \
--tokenizer_name_or_path $MODEL_PATH \
--torch_dtype float32 \
--peft_method "lora" \
--logging_strategy "epoch" \
--r 8 \
--lora_dropout 0.05 \
--lora_alpha 16

where LoraConfig that is being set looks like:

LoraConfig(
    r=8,
    lora_alpha=16,
    target_modules=['q_proj', 'v_proj'],
    lora_dropout=0.05
)

Notice the target_modules that are set are the default values. target_modules are the names of the modules to apply the adapter to. If this is specified, only the modules with the specified names will be replaced. When passing a list of strings, either an exact match will be performed or it is checked if the name of the module ends with any of the passed strings. If this is specified as all-linear, then all linear/Conv1D modules are chosen, excluding the output layer. If this is not specified, modules will be chosen according to the model architecture. If the architecture is not known, an error will be raised — in this case, you should specify the target modules manually. See HuggingFace docs for more details.

For each model, the target_modules will depend on the type of model architecture. You can specify linear or attention layers to target_modules. To obtain list of target_modules for a model:

from transformers import AutoModelForCausalLM
# load the model
model = AutoModelForCausalLM.from_pretrained(MODEL_PATH)
# see the module list
model.modules

# to get just linear layers
import re
model_modules = str(model.modules)
pattern = r'\((\w+)\): Linear'
linear_layer_names = re.findall(pattern, model_modules)

names = []
for name in linear_layer_names:
    names.append(name)
target_modules = list(set(names))

For example for LLaMA model the modules look like:

<bound method Module.modules of LlamaForCausalLM(
  (model): LlamaModel(
    (embed_tokens): Embedding(32000, 4096, padding_idx=0)
    (layers): ModuleList(
      (0-31): 32 x LlamaDecoderLayer(
        (self_attn): LlamaSdpaAttention(
          (q_proj): Linear(in_features=4096, out_features=4096, bias=False)
          (k_proj): Linear(in_features=4096, out_features=4096, bias=False)
          (v_proj): Linear(in_features=4096, out_features=4096, bias=False)
          (o_proj): Linear(in_features=4096, out_features=4096, bias=False)
          (rotary_emb): LlamaRotaryEmbedding()
        )
        (mlp): LlamaMLP(
          (gate_proj): Linear(in_features=4096, out_features=11008, bias=False)
          (up_proj): Linear(in_features=4096, out_features=11008, bias=False)
          (down_proj): Linear(in_features=11008, out_features=4096, bias=False)
          (act_fn): SiLU()
        )
        (input_layernorm): LlamaRMSNorm()
        (post_attention_layernorm): LlamaRMSNorm()
      )
    )
    (norm): LlamaRMSNorm()
  )
  (lm_head): Linear(in_features=4096, out_features=32000, bias=False)
)>

You can specify attention or linear layers. With the CLI, you can specify layers with --target_modules "q_proj" "v_proj" "k_proj" "o_proj" or --target_modules "all-linear".

Inference

Currently, we do not offer inference support as part of the library, but we provide a standalone script for running inference on tuned models for testing purposes. For a full list of options run python scripts/run_inference.py --help. Note that no data formatting / templating is applied at inference time.

Running a single example

If you want to run a single example through a model, you can pass it with the --text flag.

python scripts/run_inference.py \
--model my_checkpoint \
--text "This is a text the model will run inference on" \
--max_new_tokens 50 \
--out_file result.json

Running multiple examples

To run multiple examples, pass a path to a file containing each source text as its own line. Example:

Contents of source_texts.txt

This is the first text to be processed.
And this is the second text to be processed.

python scripts/run_inference.py \
--model my_checkpoint \
--text_file source_texts.txt \
--max_new_tokens 50 \
--out_file result.json

Inference Results Format

After running the inference script, the specified --out_file will be a JSON file, where each text has the original input string and the predicted output string, as follows. Note that due to the implementation of .generate() in Transformers, in general, the input string will be contained in the output string as well.

[
    {
        "input": "{{Your input string goes here}}",
        "output": "{{Generate result of processing your input string goes here}}"
    },
    ...
]

Changing the Base Model for Inference

If you tuned a model using a local base model, then a machine-specific path will be saved into your checkpoint by Peft, specifically the adapter_config.json. This can be problematic if you are running inference on a different machine than you used for tuning.

As a workaround, the CLI for inference provides an arg for --base_model_name_or_path, where a new base model may be passed to run inference with. This will patch the base_model_name_or_path in your checkpoint's adapter_config.json while loading the model, and restore it to its original value after completion. Alternatively, if you like, you can change the config's value yourself.

NOTE: This can also be an issue for tokenizers (with the tokenizer_name_or_path config entry). We currently do not allow tokenizer patching since the tokenizer can also be explicitly configured within the base model and checkpoint model, but may choose to expose an override for the tokenizer_name_or_path in the future.

Validation

We can use lm-evaluation-harness from EleutherAI for evaluating the generated model. For example, for the Llama-13B model, using the above command and the model at the end of Epoch 5, we evaluated MMLU score to be 53.9 compared to base model to be 52.8.

How to run the validation:

pip install -U transformers
pip install -U datasets
git clone https://github.com/EleutherAI/lm-evaluation-harness
cd lm-evaluation-harness
pip install -e .
python main.py \ 
--model hf-causal \
--model_args pretrained=$MODEL_PATH \ 
--output_path $OUTPUT_PATH/results.json \ 
--tasks boolq,piqa,hellaswag,winogrande,arc_easy,arc_challenge,hendrycksTest-*

The above runs several tasks with hendrycksTest-* being MMLU.

More Examples

Prompt Tuning on Twitter Complaints