forastero 1.2.0

cocotb verification framework with the batteries included

Forastero

Forastero is a library for writing better testbenches with cocotb, taking some inspiration from the Unified Verification Methodology (UVM) but distilling it to just the most useful parts.

For those unfamiliar, cocotb is a Python framework for writing testbenches for hardware designs written in a HDL such as SystemVerilog. It is agnostic to the simulator being used, working equally well with opensource and commercial solutions, which is rather unique for the EDA industry.

In some ways Forastero is a spiritual successor to cocotb-bus, which has now fallen out of active support. Forastero takes much of its inspiration from cocotb-bus, but takes a different view to how the testbench and its various components interact.

What makes Forastero different?

Testbench Class

Forastero provides a way to write testbenches where common drivers and monitors are defined and attached to the design in a class, rather than as part of each test sequence. This is subtly different to the recommendations laid out in cocotb's documentation, but leads to less code duplcation and makes it faster to add new tests.

For example, the following code defines a testbench with a driver attached to a stream input port of the design:

from forastero import BaseBench, IORole

from .stream import StreamInitiator, StreamIO

class Testbench(BaseBench):
    def __init__(self, dut):
        super().__init__(dut, clk=dut.i_clk, rst=dut.i_rst)
        stream_io = StreamIO(dut, "stream", IORole.RESPONDER)
        self.register("stream_init", StreamInitiator(self,
                                                     stream_io,
                                                     self.clk,
                                                     self.rst))

Highlighting a few interesting snippets:

• Testbench inherits from forastero.BaseBench that provides a baseline setup for a testbench;
• super().__init__(...) is called with a handle to the DUT as well as the primary clock and reset signals of the design, these are used in standard sequences (such as waiting for a test to end) to observe time passing;
• StreamIO(...) wraps multiple signals on the boundary of the design up in a single object that can be referenced by drivers and monitors;
• self.register("stream_init", StreamInitiator(...)) creates an instance of a driver and registers it with the testbench using the name 'stream_init', the StreamIO object, clock, and reset are passed into the driver.

Forastero has some assumptions of how your design looks, specifically around how signals are named. It assumes the following naming convention:

• Ports are prefixed according to their direction with inputs prefixed by i_ and outputs by o_;
• Port names then have a common section depending on their purpose, for example all signal relating to the stream interface start with either i_stream_ or o_stream_;
• Finally the port name ends with its purpose, for example i_stream_data.

Such a design would look like:

module arbiter (
      input  logic        i_clk
    , input  logic        i_rst
    , input  logic [31:0] i_stream_data
    , input  logic        i_stream_valid
    , output logic        o_stream_ready
    // ...other signals...
);

// ...implementation...

endmodule : arbiter

This style is evidently opinionated, but not without reason as it makes it clear the exact purpose and direction of any signal within a line without having to cross-reference the port declaration. If it is not to your taste, the code for the BaseIO object is easily extensible.

Writing Testcases

cocotb provides the @cocotb.test() decorator to distinguish a Python function as a test, Forastero replaces this with a decorator defined by the testbench class. For example:

from ..testbench import Testbench

@Testbench.testcase()
async def smoke(tb : Testbench):
    ...

As shown above, @cocotb.test() is replaced by @Testbench.testcase() - this performs all the same functions but replaces the dut argument that cocotb normally provides with a pointer to an instance of Testbench instead. This decorator does provide some new arguments:

• reset - defaults to True, but if set to False it will skip the standard reset and initialisation preamble of the testbench and immediately start the test;
• timeout - sets the maximum number of clock ticks that the testcase can run for before the testbench assumes it is a failure and stops it, this defaults to 10000.
• shutdown_loops - overrides the number of loops performed at the end of simulation to determine if all monitors, drivers, and scoreboards have drained, this defaults to 2;
• shutdown_delay - overrides the delay between loops of the shutdown sequence, this defaults to 100 clock ticks.

Why the name Forastero?

Forastero is the most commonly grown variety of cacao tree, providing a large part of the world's supply of cocoa beans. The name was chosen as a bit of a word play with the 'coco' part of 'cocotb'.