frp-jump

Connect Linux boxes (including Wiren Board controllers) to each other over the internet using the SSH/TCP clients you already have — no manual port juggling, and no caring whether the link ended up peer-to-peer or relayed through your server.

• Tunneling is frp (frpc/frps), driven through an abstract TunnelDriver/RelayDriver interface — see docs/architecture.md.
• P2P with relay fallback is frp's own xtcp + fallbackTo feature: a device pair first tries a direct (hole-punched) connection, and transparently falls back to relaying through your server if that doesn't complete within a timeout. Not something this project implements itself.
• Security: a private CA (run by your server) issues an mTLS cert to every enrolled device, so nothing unenrolled can reach the relay at all; a per-pair secret means even enrolled devices can't reach each other's services without an explicit grant. There is no WebUI at all — admin actions are frp-jump-server commands run over SSH to the box, and a person is identified by an SSH public key an admin registers once (users add-key), not an email/password account. After that person's first device is enrolled, they self-serve entirely from their own CLI (adding more of their own devices, connecting to each other), scoped to devices they own. Disabling a device or deleting a grant takes effect on its next sync, not instantly — see docs/architecture.md for what that does and doesn't cover.
• UX goal: after setup, ssh <name> just works with your stock ssh client, whether the path underneath is p2p or relayed.

Installing the CLI

Two supported ways to install, plus a manual fallback. Either one gets you the same frp-jump-client/frp-jump-server CLIs; pick whichever fits how you manage the box.

Option A: pip

Published on PyPI as frp-jump, Python 3.12+ required (already present on any recent Debian/Ubuntu, including Wiren Board controllers). It splits into two lean pieces sharing one package, so a device install doesn't pull in the server's dependencies:

python3 -m venv .venv    # needs the venv module: on Debian/Ubuntu that's
                          # a separate package, `apt install python3-venv`

# on the server box:
.venv/bin/pip install 'frp-jump[server]'   # pulls in fastapi/uvicorn/sqlmodel too
.venv/bin/frp-jump-server ...

# on every device you want to connect (including headless/IoT ones):
.venv/bin/pip install frp-jump             # lean: no server-only deps
.venv/bin/frp-jump-client ...

Put .venv/bin on PATH, or call the binaries by their full path.

Option B: apt repository (Debian/Ubuntu, including Wiren Board)

A self-contained .deb (own Python 3.12 runtime under /opt/frp-jump-client, no venv/pip involved) via a signed apt repo hosted on GitHub Pages — add it once, then apt upgrade picks up new releases like any other package:

sudo mkdir -p /etc/apt/keyrings
curl -fsSL https://aadegtyarev.github.io/frp-jump/frp-jump-archive-keyring.asc \
  | sudo gpg --dearmor -o /etc/apt/keyrings/frp-jump.gpg
echo "deb [signed-by=/etc/apt/keyrings/frp-jump.gpg] https://aadegtyarev.github.io/frp-jump stable main" \
  | sudo tee /etc/apt/sources.list.d/frp-jump.list

sudo apt update
sudo apt install frp-jump-client   # or frp-jump-server, on the relay box

Only frp-jump-client is packaged as a .deb today (the server side is meant to run from a venv via pip, per "Quick start" below).

Fallback: download a .deb directly

Each GitHub Release also attaches the .deb for each architecture (amd64/arm64/armhf) individually — useful for an air-gapped box, or if you'd rather not add the apt repo:

wget https://github.com/aadegtyarev/frp-jump/releases/download/vX.Y.Z/frp-jump-client_X.Y.Z_arm64.deb
sudo apt install ./frp-jump-client_X.Y.Z_arm64.deb

You're then on your own for upgrades (repeat the download for each new version) — Option B does this automatically.

Every command has full --help text with runnable examples — start there if anything below is unclear (frp-jump-client <command> --help).

Quick start

On the server (a box with a public IP/domain):

sudo frp-jump-server install-service --relay-public-addr tunnel.example.com

That one command creates a dedicated, unprivileged frp-jump system user, bootstraps the CA/database under its own /var/lib/frp-jump, and installs + starts a hardened systemd unit -- see "systemd" below for what it actually sets up. Prefer to do it by hand, or already have your own service-account convention:

export FRP_JUMP_RELAY_PUBLIC_ADDR=tunnel.example.com   # or a bare IP
frp-jump-server init
frp-jump-server run          # foreground; wrap with systemd for real use

In another shell (or over SSH, any time later), register yourself — a person is identified by an SSH public key, not an account:

frp-jump-server users add-key ~/.ssh/id_ed25519.pub --label me

Now enroll your first device. Two ways, pick whichever's easier for a given device:

# key-based -- works for every device once your key is registered, no
# token to hand out. --name is required (there's no hint to fall back on).
frp-jump-client enroll https://tunnel.example.com ~/.ssh/id_ed25519 --name laptop

# token-based -- for a device without your key on it, or one you'd
# rather not hand a personal key to. Mint one first:
frp-jump-server enroll-tokens create --user me --name wb01
frp-jump-client enroll https://tunnel.example.com <token-from-above>

Run as root, enroll also installs and starts the systemd service right away; otherwise it tells you to run install-service next:

frp-jump-client install-service                                  # system-wide, needs root
frp-jump-client install-service --user                            # your own account, no root needed
frp-jump-client install-service --system-user frp-jump-client     # isolated account (created for you)

From there, everything is self-service — no more admin action needed for that person, ever, even to add a tenth device or reconfigure who talks to whom:

frp-jump-client devices add-token               # mint a token to chain-enroll
                                                 # one more of your own devices
                                                 # (or just enroll it by key)
frp-jump-client devices list                    # devices you own
frp-jump-client connect wb01:22                 # wire yourself up to port 22
                                                 # on your device "wb01" (ssh,
                                                 # 22/2222 are well-known;
                                                 # anything else is a plain
                                                 # tcp tunnel, or pass --ssh)
frp-jump-client status                          # see what's exposed/consumed,
                                                 # and local addresses once synced
frp-jump-client disconnect wb01                 # tear it back down
frp-jump-client devices disable old-laptop      # lost it? block its connections
                                                 # without losing the enrollment
frp-jump-client devices delete old-laptop       # gone for good, frees the name

Once synced (each side's agent polls every agent_poll_interval_seconds, default 30s):

ssh wb01                     # just works -- `connect`'s local profile name
                              # doubles as the ssh_config Host alias

An admin can see everyone's devices and connections (including a compact relayed-traffic figure, when a connection actually went through the relay) without touching anyone's box:

frp-jump-server users list
frp-jump-server users show me
frp-jump-server devices list
frp-jump-server devices disable wb01 --user me    # force-disconnect + block,
                                                   # reversible with `enable`

Configuration

Everything configurable lives in one place: src/frp_jump/common/settings.py — set via FRP_JUMP_<FIELD> environment variables, or a TOML file ($FRP_JUMP_CONFIG_FILE, else the first of ./frp-jump.toml, ~/.config/frp-jump/config.toml, /etc/frp-jump/config.toml that exists). Env vars win over the file. Nothing else in the codebase hardcodes a port, TTL, or version pin.

The only setting with no sane default is relay_public_addr — the address other devices dial to reach your relay; frp-jump-server init/run refuse to start without it.

systemd

On the client, frp-jump-client install-service [--user | --system-user NAME] generates and enables the unit for you (see "Quick start" above) — reach for packaging/systemd/ directly only for a manual or packaged (.deb) install. Its comments explain a real gotcha: a device that consumes an SSH grant needs the agent running as the actual human (so it can maintain their real ~/.ssh/config) — a --user unit, not a system one, unless you point FRP_JUMP_SSH_CONFIG_PATH at that user's config explicitly. A device that only exposes services (e.g. a Wiren Board controller), or consumes without needing ssh <name> to just work, is fine as a system service or under --system-user — an isolated account created for you, least-privilege, with its own /var/lib/<name>.

On the server, frp-jump-server install-service [--system-user NAME] [--relay-public-addr ADDR] is the equivalent one-shot setup (see "Quick start" above): creates the system account, bootstraps the CA/database, writes /etc/frp-jump/<name>.env, and installs a hardened unit (ProtectSystem=strict, NoNewPrivileges=yes, one writable data directory) — matching packaging/systemd/frp-jump-server.service if you'd rather set it up by hand.

Development

uv sync
uv run pytest tests/unit -q        # fast, no network
uv run ruff check .
uv run pytest tests/integration -m integration -q   # downloads real frp binaries; loopback only

The integration test proves the whole chain works over loopback (real frp binaries, real mTLS, real xtcp-timeout-then-stcp-fallback), but it can't prove real NAT hole-punching across two separate networks — that's the one thing to manually check on your own machines after this lands.

Layout

src/frp_jump/
  common/     PKI (private CA), opaque tokens, settings, DB models
  driver/     TunnelDriver/RelayDriver abstraction; driver/frp/ = the frp
              implementation (config rendering, binary download+checksum,
              process supervision)
  server/     control-plane: registry (CRUD), the agent-facing API,
              bootstrap (`server init`) -- no WebUI, admin is CLI-only
  agent/      runs on every device: enroll (token or SSH key), the sync
              loop, local profiles, ssh_config management, systemd
              install (`agent/service_install.py`)
  cli/        `frp-jump-server ...` / `frp-jump-client ...`

Contributing

See CONTRIBUTING.md. Changes are tracked in CHANGELOG.md.

License

MIT