g13-linux 1.7.0

Logitech G13 Linux driver with macro support, RGB control, and LCD display management

G13 Linux

Python userspace driver for the Logitech G13 Gaming Keyboard on Linux.

Features

• 22 Programmable G-Keys with macro support
• RGB Backlight Control with full color range
• 160x43 LCD Display with custom text and graphics
• Thumbstick Support with configurable zones
• Profile Management for different applications
• Per-Application Profiles - automatically switch profiles based on active window
• PyQt6 GUI for visual configuration

Installation

# From PyPI
pip install g13-linux

# Or with pipx (recommended for CLI tools)
pipx install g13-linux

System Dependencies

# Ubuntu/Debian
sudo apt install libhidapi-hidraw0

# Fedora
sudo dnf install hidapi

udev Rules (Required)

# Allow non-root access to G13
sudo cp udev/99-logitech-g13.rules /etc/udev/rules.d/
sudo udevadm control --reload-rules
sudo udevadm trigger

Usage

CLI

g13-linux --help              # Show help
g13-linux --version           # Show version
g13-linux                     # Run the input daemon
g13-linux run                 # Run the input daemon (explicit)
g13-linux run --libusb        # Prefer libusb backend first for input capture

# LCD control
g13-linux lcd "Hello World"   # Display text on LCD
g13-linux lcd --clear         # Clear the LCD

# Backlight control
g13-linux color red           # Set backlight to red
g13-linux color "#FF6600"     # Set backlight to hex color
g13-linux color 255,128,0     # Set backlight to RGB

# Profile management
g13-linux profile list        # List available profiles
g13-linux profile show eve    # Show profile details
g13-linux profile load eve    # Load and apply a profile
g13-linux profile create new  # Create a new profile
g13-linux profile delete old  # Delete a profile
g13-linux profile migrate eve # Migrate one legacy profile to canonical joystick schema
g13-linux profile migrate --all --dry-run  # Preview migrations for all profiles

# Device diagnostics
g13-linux doctor              # Probe hidraw/libusb and print setup issues
g13-linux doctor --libusb-first  # Probe libusb first
# Includes hidraw access flags (rw/r-/--), plus detection source (uevent/usb_ids)

GUI

g13-linux-gui         # Launch the configuration GUI

Binding workflow in the GUI:

• Start with Quick Setup Wizard to map core keys (G1-G8) in a guided sequence.
• Pick a starter template in the wizard (Manual/MMO/FPS/Productivity), then optionally fine-tune each key.
• Finish wizard by optionally saving the result as a new profile in one step.
• Left-click a G13 button to open key binding.
• Use Start Keyboard Capture in the dialog and press the desired key combo.
• Use Common Shortcut Presets (Copy/Paste/Cut/Save/Undo/Redo) for fast setup.
• Double-click a key (or press Enter) to accept it immediately.
• If a binding is already in use, choose Move, Keep Duplicate, or Cancel.
• Hover any on-device button to see a full binding detail strip without opening dialogs.
• Right-click a mapped button to quickly clear its binding.
• Use Run Diagnostics in the top status banner when the device is not detected.
• On first failed connection, the GUI opens a Setup Assistant with copy-ready udev/libusb commands.
• Keep the right panel in Core mode for daily setup; switch to Core + Advanced for macros, hardware tuning, and live monitor tools.
• Watch the session summary bar for active profile, bound-button count, and stick mode.
• Save the selected profile to persist changes.

Python API

from g13_linux import open_g13, G13Mapper

# Open device and start mapping
device = open_g13()
mapper = G13Mapper()

# Read events
while True:
    data = read_event(device)
    if data:
        mapper.handle_raw_report(data)

Profile Format (Quick Reference)

Profile JSON files are loaded from:

• Source checkout: configs/profiles/*.json
• Installed package: ~/.config/g13-linux/profiles/*.json

Button mappings support both simple and combo formats:

{
  "mappings": {
    "G1": "KEY_1",
    "G2": {
      "keys": ["KEY_LEFTCTRL", "KEY_B"],
      "label": "Save location"
    },
    "STICK": {
      "keys": ["KEY_LEFTCTRL"],
      "label": "Joystick click"
    }
  }
}

Joystick settings should use the canonical schema:

{
  "joystick": {
    "mode": "digital",
    "deadzone": 20,
    "sensitivity": 1.0,
    "key_up": "KEY_UP",
    "key_down": "KEY_DOWN",
    "key_left": "KEY_LEFT",
    "key_right": "KEY_RIGHT",
    "allow_diagonals": true
  }
}

mode values:

• analog: expose a virtual joystick device
• digital: map directions to keyboard keys
• disabled: ignore stick movement

Legacy joystick profiles that use mode: "directional" with nested up/down/left/right are still accepted for backward compatibility, but saving from the GUI rewrites them to the canonical schema above.

For step-by-step legacy conversion examples, see docs/profile-migration.md. For release operations and PyPI trusted publisher setup, see docs/release-checklist.md. For Linux CI parity testing, see docs/testing-ubuntu.md.

Per-Application Profiles

Automatically switch G13 profiles when you switch applications. For example, load your EVE Online profile when EVE is focused, and switch to your browser profile when Firefox is active.

Setup (GUI)

1. Launch the GUI: g13-linux-gui
2. Go to the App Profiles tab
3. Click Add Rule to create a new rule:
   • Rule Name: A friendly name (e.g., "EVE Online")
   • Pattern: Regex pattern to match (e.g., EVE - or firefox)
   • Match Type: Match against window name, WM_CLASS, or both
   • Profile: Select which profile to activate
4. Enable auto-switching with the toggle at the top
5. Click Test to see the current window's info

Configuration File

Rules are stored in ~/.config/g13-linux/app_profiles.json:

{
  "rules": [
    {
      "name": "EVE Online",
      "pattern": "EVE -",
      "match_type": "window_name",
      "profile_name": "eve_online",
      "enabled": true
    },
    {
      "name": "Firefox",
      "pattern": "firefox",
      "match_type": "wm_class",
      "profile_name": "browser",
      "enabled": true
    }
  ],
  "default_profile": "default",
  "enabled": true
}

Requirements

• X11 only: Requires xdotool for window detection (not available on Wayland)
• Install: sudo apt install xdotool

How It Works

1. A background thread polls the active window every 500ms using xdotool
2. When the active window changes, rules are matched against window name and WM_CLASS
3. First matching rule triggers a profile switch
4. If no rules match, the default profile is loaded (if configured)

Hardware

Component	Status
G1-G22 Keys	✅ Working
M1-M3 Mode Keys	✅ Working
MR Key	✅ Working
Thumbstick	✅ Working
LCD Display	✅ Working
RGB Backlight	✅ Working

Note: Button input requires either:

• udev rules for hidraw access, or
• sudo with libusb mode (g13-linux-gui --libusb)

If detection fails, run g13-linux doctor for backend-level diagnostics and setup hints.

Linux kernel 6.19+ will include native hid-lg-g15 support for G13.

Development

# Clone and setup
git clone https://github.com/AreteDriver/G13_Linux.git
cd G13_Linux
python -m venv .venv
source .venv/bin/activate
pip install -e ".[dev]"

# Run tests
pytest

# Ubuntu CI-like test path (installs Linux deps + runs under xvfb)
./scripts/test_ubuntu.sh --system-deps

# Lint
ruff check src/ tests/

Linux test setup details: docs/testing-ubuntu.md

License

MIT License - see LICENSE for details.

Links

• PyPI Package
• GitHub Issues
• Logitech G13 Specs