gate-cache

Skip lint and test gates that already passed on the exact same git tree.

The same code often goes through the same gates many times before it ships: at the end of local work, in a pre-commit hook, again after a rebase that changed nothing, and again in a pre-push hook. When a test suite takes minutes, this repetition is the slowest part of the cycle.

gate-cache wraps one gate command. When the command passes, gate-cache records the pass against the git tree of the tracked files. If you run the same named gate on the same tree again, gate-cache exits 0 in milliseconds and does not run the command. CI starts from a fresh clone with no records, so CI still runs every gate.

$ gate-cache --name pytest -- uv run pytest
... pytest output ...
$ gate-cache --name pytest -- uv run pytest
gate-cache: pytest already passed on tree aaff74984ccc, skipping

Install

gate-cache requires Python 3.11 or later.

To install the command line tool, run:

uv tool install gate-cache

You do not need to install anything to use gate-cache as a hook. prek and pre-commit 3.2 or later install it from the hook repository.

Use it as a hook

Add one gate-cache entry for each gate that you want to cache. Each entry gives the gate a name with --name and puts the command after --:

repos:
  - repo: https://github.com/natelandau/gate-cache
    rev: v0.1.0
    hooks:
      - id: gate-cache
        name: pytest
        alias: pytest
        args: [--name, pytest, --, uv, run, pytest]
        files: ^(src/|tests/|uv\.lock|pyproject\.toml)
      - id: gate-cache
        name: ruff
        alias: ruff
        args: [--name, ruff, --, uv, run, ruff, check, .]

The hook sets pass_filenames: false, so the runner does not append file names to the wrapped command. The files and always_run keys are your choice. The hook runs in the pre-commit, pre-push, and manual stages.

The wrapped command runs in the environment of the hook. prek and pre-commit install gate-cache in its own virtual environment, so the command sees VIRTUAL_ENV set to that environment, and the bin directory of that environment comes first on PATH. gate-cache does not change this environment. Thus:

• Start the command with uv run, or give an absolute path or a command that your project supplies. Do not use a bare tool name such as pytest, because it can find the copy in the hook environment, or find nothing.
• uv run prints VIRTUAL_ENV=... does not match the project environment path .venv and will be ignored. This warning is harmless: uv run uses the project environment.

Agents, scripts, and people can call the same command directly. A pass that one caller records is a hit for every other caller:

gate-cache --name pytest -- uv run pytest

Both --name and -- are required, and only --name can come before --. gate-cache passes everything after -- to the command without changes. A missing --name or --, or any other argument before --, is a usage error: gate-cache runs nothing and exits 2. Otherwise gate-cache exits with the exit code of the command, or 0 on a skip. If a signal stops the command, gate-cache exits with 128 plus the signal number.

Never wrap these

gate-cache keys a pass only on the content of tracked files. Never wrap a command whose result depends on anything else. A wrapped check of that kind can be skipped when a fresh run fails.

Keep these as normal, unwrapped hooks:

• Commit message checks, such as the commitizen commit-msg hook.
• Branch name checks.
• Any command that talks to a remote.
• Secret scanners and other hooks that must always run, such as gitleaks.

gate-cache decides only about the command that it wraps. It never skips other hooks.

How a cache hit is decided

Each time it runs, gate-cache does these steps in this sequence:

1. If GATE_CACHE_DISABLE turns caching off, run the command and record nothing.
2. Find the tree to key on. The tree is git write-tree, which is the content of the index. gate-cache uses it only if the tracked files in the working copy match the index and no untracked, non-ignored files exist.
3. If the tree is unknown, run the command without the cache and record nothing. The tree is unknown with unstaged changes, untracked non-ignored files, an unmerged index, outside a git repository, or after any git error.
4. If git cannot find the git directory that holds the markers, run the command without the cache and record nothing.
5. If a marker for the tree and name exists, print a skip line and exit 0.
6. Run the command.
7. If the command exits 0 and the tree is still the same, write the marker.

At commit time, prek and pre-commit stash unstaged edits, so the key is the staged content that you commit. At push time with a clean checkout, the key is the tree of HEAD.

A command that exits 0 but changes the tree does not get a record. Examples are a formatter that rewrites files and a command that leaves new untracked files. gate-cache prints files changed during the run, not recording pass in this case.

A failing command, a signal, or Ctrl-C never writes a marker. If gate-cache gets SIGTERM or SIGHUP while the command runs, it sends the signal to the command, waits for the command to stop, and exits with the status of the command. A cache error never changes the exit code of the command. If gate-cache cannot write a marker, it prints a warning and keeps the exit code.

Markers live in the git common directory, so all linked worktrees of a repository share them. After each new marker, gate-cache deletes markers older than 30 days.

Marker format

Other tools can read and write markers without calling gate-cache. The marker format is a public contract, and any change to it is a breaking change.

The key is the lowercase hex SHA-256 of the tree hash, a NUL byte, and the gate name:

key    = sha256( tree_hash + "\0" + name )
marker = $(git rev-parse --git-common-dir)/gate-cache/<key>

To find the marker for the pytest gate from a shell, run:

tree=$(git write-tree)
key=$(printf '%s\0%s' "$tree" pytest | shasum -a 256 | cut -d' ' -f1)
marker="$(git rev-parse --git-common-dir)/gate-cache/$key"

On Linux systems without shasum, use sha256sum instead.

The existence of the marker file is the signal. The file holds a small JSON object with tree, name, command, and timestamp keys for debugging. Do not depend on its content.

Blind spots

The key covers only the content and the modes of tracked files. It does not cover:

• Ignored inputs, such as .env and .venv.
• Environment variables.
• Tool versions that a lockfile does not pin.
• External services.
• Changes that git is told to ignore. core.fileMode=false hides changes to the executable bit. git update-index --assume-unchanged and --skip-worktree hide edits to tracked files.
• Changes in submodules that git is told to ignore. diff.ignoreSubmodules and the submodule.<name>.ignore setting can hide a dirty submodule, so a run with uncommitted submodule edits can record a pass for the tree of the parent repository.

If a gate depends on one of these, gate-cache can skip it when a fresh run fails. CI still runs every gate from a fresh clone. After a change outside git, such as a tool upgrade, run gate-cache clear. To run gates without the cache, set GATE_CACHE_DISABLE=1.

Commands

gate-cache has two commands in addition to the default run. Run gate-cache --help for the full reference.

status

gate-cache status reports whether a gate would skip on the current tree. It runs nothing.

$ gate-cache status --name pytest
  name:   pytest
  tree:   aaff74984cccd156a469afa7d9ab10e4777beb24
  marker: /path/to/repo/.git/gate-cache/698af5f62774dab7babf59a4b8969fed12d8668428cee49ca89baf4aa392de6d
  result: hit

If the tree is unknown, the tree line gives the reason, such as unknown: untracked file: notes.txt. The command exits 0 on a hit and 1 otherwise.

clear

gate-cache clear deletes every marker for the current repository, in all of its worktrees. Use it after a change that git cannot see, such as a tool upgrade. Outside a git repository, it exits 1.

$ gate-cache clear
gate-cache: removed 3 markers

Turn off caching

If GATE_CACHE_DISABLE has a value that is not empty and not 0, gate-cache runs every command and never reads or writes markers. With caching off, gate-cache status exits 1.

GATE_CACHE_DISABLE=1 git push

Supported runners and platforms

gate-cache works with prek and with pre-commit 3.2 or later. It runs on macOS and Linux. Windows is not supported.