gce-rescue 2.3.0

GCE Rescue - Rescue unbootable Google Compute Engine VMs.

GCE Rescue

Rescue unbootable Google Compute Engine VMs by swapping disks on the same VM — no new instance created, same IP, no data loss. Creates a safety snapshot before any changes.

Auto-fix path: The repair command reads serial console output, identifies the boot failure, and applies a fix automatically end to end.

Rescue path: When auto-fix is not available for the detected issue, the rescue command swaps your broken boot disk with a rescue disk and attaches the original boot disk as a secondary disk, providing a rescue environment for manual repair. Once fixed, the restore command puts your fixed boot disk back.

gce-rescue diagnose my-vm --zone=us-central1-a    # What's wrong?
gce-rescue repair my-vm --zone=us-central1-a      # Auto-fix it

Note: GCE Rescue is not an officially supported Google Cloud product. The Google Cloud Support team maintains this repository.

Requirements: Python >= 3.9, gcloud CLI, roles/compute.instanceAdmin.v1 IAM role.

Installation

Google Cloud Shell (recommended)

Open Cloud Shell — Python, gcloud, and authentication are already set up.

pip install gce-rescue

Verify the installation:

gce-rescue -h

If gce-rescue is not found after install, start a new shell session or run:

export PATH="$HOME/.local/bin:$PATH"

Local Machine

Linux / macOS

curl -sSL https://raw.githubusercontent.com/GoogleCloudPlatform/gce-rescue/main/install.sh | bash

May require sudo if Python or pip is not installed.

Windows (run PowerShell as Administrator)

irm https://raw.githubusercontent.com/GoogleCloudPlatform/gce-rescue/main/install.ps1 | iex

The installers handle all prerequisites (Python, gcloud, PATH, authentication) and will prompt before installing anything.

---

Install from source (requires Python >= 3.9, gcloud CLI, Git)

git clone https://github.com/GoogleCloudPlatform/gce-rescue.git
cd gce-rescue
pip install .

Usage

Start with diagnose — understand what's wrong (safe, read-only)

gce-rescue diagnose VM_NAME --zone=ZONE

Auto-fix available? — let repair handle it automatically

gce-rescue repair VM_NAME --zone=ZONE

Already know the fix? — supply your own fix script (skips diagnosis)

gce-rescue repair VM_NAME --zone=ZONE --fix-script=fix.sh

Ideal for large-scale events where many VMs share one known fix: the script runs against the mounted boot disk, then the VM is restored and boot-verified automatically. Add --quiet for automation.

Need manual access? — enter rescue mode, fix it yourself

gce-rescue rescue VM_NAME --zone=ZONE

# SSH/RDP in, fix the issue on /mnt/sysroot

gce-rescue restore VM_NAME --zone=ZONE

Command	What it does	Modifies VM?
diagnose	Identifies boot errors from serial console output	No
repair	Diagnoses and fixes boot issues automatically	Yes
rescue	Provides a rescue environment for investigation via SSH/RDP	Yes
restore	Reverses rescue, puts your fixed boot disk back	Yes

All operations create a snapshot before changes, roll back automatically on failure, and can resume if interrupted.

Sample output: diagnose

$ gce-rescue diagnose my-vm --zone=us-central1-a
Diagnosis: my-vm (us-central1-a)
Status:    RUNNING
OS:        Linux (debian-12-bookworm, x86_64, Free)
Result:    Found 1 boot error(s)

  [fstab_bad_uuid] Bad UUID in /etc/fstab (critical)
    Line: UUID=abcd-1234  /data  ext4  defaults  0  2
    Fix:  Remove or correct the fstab entry, then reboot

  Recommended: gce-rescue repair my-vm --zone=us-central1-a

Authentication

Environment	Setup
Cloud Shell	Pre-authenticated, nothing to do
GCE VM (with service account)	Automatic via metadata server
GCE VM (without compute scopes)	gcloud auth application-default login
Local machine	gcloud auth application-default login

More info: Application Default Credentials

Flags

Flag	Description
--zone	GCP zone (required)
--project	GCP project (default: current gcloud config)
--no-snapshot	Skip safety snapshot (faster)
--rescue-image	Custom rescue disk image URL (must match VM's OS family + architecture). Useful for restricted-image org policies or hardened rescue environments. Available for rescue and repair.
--fix-script	Path to a custom fix script (bash on Linux, PowerShell on Windows) to run against the affected disk after it is mounted — skips diagnosis. With repair the VM is restored and boot-verified afterwards; with rescue it stays in rescue mode for inspection. The affected disk is mounted at /mnt/sysroot on Linux; on Windows its partitions get drive letters from D: onward (iterate non-C: volumes rather than assuming D:).
--verification-timeout	Seconds to wait for the rescue VM startup script to complete (serial console marker). Overrides the OS-aware default (Linux: 300, Windows: 600). Raise it for slow-booting VMs. Available for rescue and repair.
--quiet	No confirmation prompts (for automation)
--format	Output format: json, yaml, table

Features

Feature	Description
Linux + Windows	Auto-detects OS, uses appropriate rescue environment
Boot Diagnostics	Serial console analysis for fstab, GRUB, kernel, filesystem errors
Auto-Repair	Automated fix for fstab errors (more categories planned)
Custom Fix Scripts	Bring your own fix (--fix-script) for known issues at scale — no diagnosis needed
Automatic Rollback	Operations roll back on failure
Session Recovery	Resume or rollback interrupted operations
Safety Snapshots	Backup snapshot before any changes (default)
ARM64 Support	Automatic architecture detection

Permissions

roles/compute.instanceAdmin.v1 includes all permissions needed for every command.

Command	Minimum Role
diagnose	roles/compute.viewer
rescue, restore, repair	roles/compute.instanceAdmin.v1

gcloud projects add-iam-policy-binding PROJECT_ID \
    --member="user:EMAIL" \
    --role="roles/compute.instanceAdmin.v1"

Full permissions matrix

Permission	diagnose	repair	rescue	restore
compute.projects.get	x	x	x	x
compute.instances.get	x	x	x	x
compute.instances.getSerialPortOutput	x	x	x
compute.instances.stop		x	x	x
compute.instances.start		x	x	x
compute.instances.attachDisk		x	x	x
compute.instances.detachDisk		x	x	x
compute.instances.setMetadata		x	x	x
compute.disks.create		x	x
compute.disks.delete		x	x	x
compute.disks.get		x	x	x
compute.disks.createSnapshot		x*	x*
compute.snapshots.create		x*	x*
compute.snapshots.get		x*	x*
compute.snapshots.list		x		x
compute.snapshots.delete		x*	x*

* Skippable with --no-snapshot

V1 Legacy

V1 is available as gce-rescue-v1 for backward compatibility:

gce-rescue-v1 -n VM_NAME -z ZONE -p PROJECT

See the V1 documentation for details.

Uninstall

pip uninstall gce-rescue

# Linux/macOS (if installed via install script)
rm -rf ~/.gce-rescue

Contact

GCE Rescue Team: [e-mail]