genesys-framework-cli 0.1.2

A developer-friendly, opinionated framework for ROS 2.

Genesys: An Opinionated ROS 2 Framework

Genesys is a developer-friendly, opinionated framework for ROS 2 designed to reduce boilerplate, streamline common workflows, and provide a "happy path" for robotics development. It wraps the powerful but sometimes verbose ROS 2 toolchain in a single, intuitive CLI, allowing you to focus on logic, not setup.

Core Philosophy

The goal of Genesys is not to replace ROS 2, but to enhance it. It addresses common pain points for both beginners and experienced developers:

• Complex Build Systems: Automates package creation, dependency management, and the colcon build process.
• Verbose Boilerplate: Uses decorators (Python) and macros (C++) to simplify node, publisher, and subscriber creation.
• Manual Configuration: Auto-generates and registers launch files, configuration, and executables.
• Fragmented Tooling: Provides a single, unified CLI (genesys) for creating, building, running, and simulating your projects.

Key Principle: Every Genesys project remains a 100% valid ROS 2 project. You can always fall back to colcon build and ros2 run at any time.

---

Features

• Unified CLI: A single entry point (genesys) for all your development tasks.
• Project Scaffolding: Create a standardized workspace structure with genesys new.
• Interactive Code Generation: Use genesys make pkg and genesys make node to interactively build packages and nodes with zero boilerplate, now including interactive selection for node types like publishers, subscribers, services, actions, and lifecycle nodes.
• Automated Build & Sourcing: genesys build handles colcon and environment sourcing automatically.
• Simplified Execution: Run nodes by name with genesys run <node_name> or launch entire packages with genesys launch <pkg_name>.
• One-Command Simulation: Launch Gazebo with your world and robot model using genesys sim <world_file>.
• Decorator-Based API: A clean, declarative way to define ROS 2 components in Python.
• Expanded Tooling: Provides a suite of commands for common ROS 2 tasks, from listing nodes and topics to managing parameters and debugging.
• Environment Doctor: A simple command (genesys doctor) to check if your environment is configured correctly, including a check for missing dependencies via rosdep.

---

Installation

1. Prerequisites:

   • An installed ROS 2 distribution (e.g., Humble, Iron).
   • The ROS_DISTRO environment variable must be set (e.g., export ROS_DISTRO=humble).

2. Install the CLI: Clone this repository and run the following command from the project root (Genesys/):

   pip install -e .
   

   OR Install without cloning the repo

   pip install genesys-framework-cli
   

   This installs the genesys command

   Make the command available immediately

   export PATH="$(python3 -m site --user-base)/bin:$PATH"

   (Optional) Add permanently so you don't repeat this step

   echo 'export PATH="$(python3 -m site --user-base)/bin:$PATH"' >> ~/.bashrc

3. Verify Installation: Open a new terminal and run the environment checker:

   genesys doctor
   

   If all checks pass, you're ready to go!

---

Quickstart: Your First Project

This workflow demonstrates the "happy path" for creating a new project from scratch.

1. Create a new workspace:

   genesys new my_robot_ws
   cd my_robot_ws
   

   This creates a standard directory structure (src/, launch/, config/, etc.).

2. Create a package with a node: The interactive wizard will guide you through the process, prompting you to select the node type (e.g., Publisher, Subscriber, etc.).

   genesys make pkg demo_pkg --with-node
   

   This generates src/demo_pkg, including package.xml, setup.py, a node file demo_pkg/demo_pkg_node.py, and auto-generates a corresponding launch file.

3. Build the project:

   genesys build
   

   This runs colcon build --symlink-install and sources the environment for you. The demo_pkg_node is now a runnable executable.

4. Run your node:

   genesys run demo_pkg_node
   

   Genesys finds which package the node belongs to and executes ros2 run demo_pkg demo_pkg_node under the hood.

---

Command Reference

Workspace & Project Management

Command	Description
genesys new <project_name>	Creates a new, structured ROS 2 workspace.
genesys make pkg <pkg_name>	Interactively creates a new Python or C++ package in src/.
genesys make node <node_name> --pkg <pkg>	Creates a new node with interactive type selection and registers it within an existing package.
genesys make interface	Scaffolds custom message, service, and action files.
genesys build	Builds the entire workspace using colcon and sources the environment.

Execution & Simulation

Command	Description
genesys run <node_name>	Runs a node by its executable name without needing the package name.
genesys launch <pkg>[:<file>]	Launches a package's default launch file or a specific one.
genesys launch --all	Launches the default.launch.py from all packages in the workspace.
genesys sim <world_file>	Starts a Gazebo simulation with the specified world and a robot model.

ROS 2 Tooling

Command	Description
genesys node list	Lists all active nodes. (Equivalent to ros2 node list)
genesys node info <node>	Displays information about a specific node. (Equivalent to ros2 node info)
genesys topic list	Lists all active topics.
genesys topic info <topic>	Displays information about a topic.
genesys topic echo <topic>	Prints messages from a topic to the console.
genesys topic pub <topic> <msg_type> <args>	Publishes a message to a topic from the CLI.
genesys service list	Lists all active services.
genesys service call <srv_name> <srv_type> <args>	Calls a service from the CLI.
genesys param list	Lists parameters for a node.
genesys param get <node> <param>	Gets a parameter value from a node.
genesys param set <node> <param> <value>	Sets a parameter value on a node.
genesys param dump	Dumps all parameters from a node to a file.
genesys debug record <topics>	Records data from specified topics.
genesys debug replay <file>	Replays recorded data from a .db3 file.
genesys doctor	Checks for common environment and configuration issues.

---

The Genesys Way: Decorators & Auto-generation

Genesys dramatically reduces boilerplate by using Python decorators to define ROS 2 constructs. When you create a node with make node, it comes pre-filled with a working example.

Example: A Simple Publisher Node

from genesys.decorators import node, timer, publisher
from genesys.helpers import spin_node
from std_msgs.msg import String

@node("my_talker_node")
class MyTalker:
    def __init__(self):
        self.counter = 0

    @timer(period_sec=1.0)
    @publisher(topic="chatter", msg_type=String)
    def publish_message(self):
        """
        This method runs every second. The String it returns is
        automatically published to the 'chatter' topic.
        """
        msg = String()
        msg.data = f"Hello from Genesys! Message #{self.counter}"
        self.logger.info(f'Publishing: "{msg.data}"') # logger is auto-injected
        self.counter += 1
        return msg

def main(args=None):
    spin_node(MyTalker, args)

if __name__ == '__main__':
    main()

When you run genesys make node or genesys build, the framework:

1. Scans for these decorators.
2. Auto-registers my_talker_node as an executable in setup.py.
3. Auto-generates/updates a launch file (launch/<pkg_name>_launch.py) to include this node.

This means your node is ready to run immediately without manually editing any build or launch files.

Example: A Simple Subscriber Node

from genesys.decorators import node, subscriber
from genesys.helpers import spin_node
from std_msgs.msg import String

@node("my_listener_node")
class MyListener:
    def __init__(self):
        # The logger is automatically injected by the @node decorator.
        self.logger.info("Listener node has been initialized.")

    @subscriber(topic="chatter", msg_type=String)
    def message_callback(self, msg):
        """
        This method is called whenever a message is received on the 'chatter' topic.
        The message is automatically passed as an argument.
        """
        self.logger.info(f'I heard: "{msg.data}"')

def main(args=None):
    spin_node(MyListener, args)

if __name__ == '__main__':
    main()

New Decorators

In addition to the ones above, Genesys introduces new decorators for advanced ROS 2 concepts, further reducing boilerplate:

• @lifecycle_node: Defines a ROS 2 Lifecycle Node and handles the state callbacks (on_configure, on_activate, etc.).
• @service: Registers a service server and automatically handles requests and responses.
• @action_server: Registers an action server with support for feedback and result generation.
• @parameter: Defines a node parameter, automatically loading values from a YAML config file and injecting them.