gfs-tool 0.0.3

git format-patch series helper with changelog trail and checkpatch support

gfs – Git Format-patch Series helper

A CLI tool built on top of git format-patch that simplifies the Linux kernel upstream patch workflow. Instead of manually juggling format-patch flags, maintainer lists, and changelog trails across versions, gfs handles it all in a single command:

• Versioned patch series — generate v1, v2, v3, … with one command.
• Automatic maintainer CCs — runs get_maintainer.pl and adds the right CCs for you.
• Changelog trail injection — automatically carries forward the changelog history across versions, so reviewers see what changed.
• Checkpatch integration — run checkpatch.pl on your series before sending.

Requirements

• Python 3.10+
• Git
• All commands must be run from the root of a Linux kernel tree (the tool needs scripts/get_maintainer.pl and scripts/checkpatch.pl).

Installation

Install from PyPI:

pip install gfs-tool

Or from source (from the gfs directory):

pip install .

Or in editable/development mode:

pip install -e .

After installation, the gfs command is available system-wide:

gfs --help

Quick start

# All gfs commands must be run from the root of a Linux kernel tree
cd /path/to/linux

# 1. Create v1 of a new series
gfs init -c <sha> -n 3 --prefix "PATCH" -t for-pm-upstream --to [e-mail] --cc [e-mail]

# 2. Run checkpatch
gfs check -t for-pm-upstream

# 3. After review → generate v2
gfs -v 2 -c <sha> -n 3 --prefix "PATCH v2" -t for-pm-upstream

# 4. Fill in changelog notes manually, then checkpatch again
gfs check -t for-pm-upstream

---

Commands

gfs init — Initialise a new patch series (v1)

Creates the first version of a patch series and saves --to / --cc in <topic>/.series.json so you don't have to repeat them.

gfs init -c <commit-sha> -n <num-patches> --prefix <prefix> -t <topic> [--to <email>] [--cc <email>]

Flag	Required	Description
-c, --commit	✅	Base commit SHA for git format-patch
-n, --num-patches	✅	Number of patches to generate
-p, --prefix	✅	Subject prefix, e.g. "PATCH", "PATCH v2"
-t, --topic	✅	Topic output directory, e.g. for-pm-upstream
--to		To: email address
--cc		Cc: email address

Example:

gfs init -c abc1234 -n 3 --prefix "PATCH" -t for-topic --to [e-mail] --cc [e-mail]

Output structure:

for-topic/
├── .series.json            ← saved to/cc config
└── v1/
    ├── 0000-cover-letter.patch
    ├── 0001-subsys-Add-foo-support.patch
    ├── 0002-subsys-Add-bar-support.patch
    └── 0003-subsys-Add-baz-support.patch

---

gfs -v N — Generate a new version (v2, v3, …)

Generates the next version of the patch series. Automatically injects changelog trail headers into every patch.

gfs -v <version> -c <commit-sha> -n <num-patches> --prefix <prefix> -t <topic> [--to <email>] [--cc <email>]

Flag	Required	Description
-v, --version	✅	Version number (2, 3, 4, …)
-c, --commit	✅	Base commit SHA
-n, --num-patches	✅	Number of patches
-p, --prefix	✅	Subject prefix, e.g. "PATCH v2"
-t, --topic	✅	Topic directory
--to		Override saved To: address
--cc		Override saved Cc: address

Example:

gfs -v 2 -c abc1234 -n 3 --prefix "PATCH v2" -t for-topic

---

gfs check — Run checkpatch.pl

Runs ./scripts/checkpatch.pl --strict --codespell on all patches in the given topic directory.

gfs check -t <topic> [-v <version>]

Flag	Required	Description
-t, --topic	✅	Topic directory
-v, --version		Version to check (default: latest)

Examples:

# Check latest version
gfs check -t for-topic

# Check a specific version
gfs check -t for-topic -v 3

---

How it works

Two-pass git format-patch

Every init and -v N invocation runs git format-patch twice:

1. Pass 1 — generates the patch files:

   git format-patch <sha> -N --to=<to> --cc=<cc> --subject-prefix="PATCH vN" --thread --cover-letter -o <topic>/vN/
   

2. Pass 2 — re-generates adding maintainers in CC:

   git format-patch <sha> -N --to=<to> --cc=<cc> --subject-prefix="PATCH vN" --thread --cover-letter -o <topic>/vN/ --cc="$(scripts/get_maintainer.pl --no-rolestats --separator=, <topic>/vN/000*)"
   

   The second pass needs the files from the first pass to exist so that get_maintainer.pl can parse them and determine the correct maintainers/reviewers.

Changelog trail injection

For version ≥ 2, gfs automatically injects changelog headers between --- and the diffstat in every patch file. It reads the trail from the previous version and prepends a new empty header.

You then fill in the details manually.

v2 patches will contain:

Signed-off-by: You <[e-mail]>
---
v1->v2:
 - 

 drivers/subsys/foo.c | 131 +++...

v3 patches will contain (after you filled v2):

Signed-off-by: You <[e-mail]>
---
v2->v3:
 - 

v1->v2:
 - Refactored initialization logic.

 drivers/subsys/foo.c | 118 +++...

v4 patches will contain:

Signed-off-by: You <[e-mail]>
---
v3->v4:
 - 

v2->v3:
 - Simplified error handling.

v1->v2:
 - Refactored initialization logic.

 drivers/subsys/foo.c | 117 +++...

Per-topic configuration

Each topic directory stores a .series.json with saved to and cc addresses, so you don't need to repeat them every time:

{
  "to": "[e-mail]",
  "cc": "[e-mail]"
}

This also means you can work on multiple series in parallel, each with its own independent config.

---

Typical workflow

# All gfs commands must be run from the root of a Linux kernel tree
cd /path/to/linux

# ── Start a new series ───────────────────────────────────────────
gfs init -c abc123 -n 3 --prefix "PATCH" -t for-pm-upstream --to [e-mail] --cc [e-mail]

# ── Check patches ────────────────────────────────────────────────
gfs check -t for-pm-upstream

# ── Send v1 with git send-email ──────────────────────────────────
git send-email for-pm-upstream/v1/*.patch

# ── After review: amend commits, then generate v2 ────────────────
gfs -v 2 -c abc123 -n 3 --prefix "PATCH v2" -t for-pm-upstream

# ── Fill in changelog notes in each patch file ───────────────────
vim for-pm-upstream/v2/0001-*.patch   # add notes under "v1->v2:"

# ── Check & send v2 ─────────────────────────────────────────────
gfs check -t for-pm-upstream
git send-email for-pm-upstream/v2/*.patch

# ── v3, v4, … repeat ────────────────────────────────────────────
gfs -v 3 -c abc123 -n 3 --prefix "PATCH v3" -t for-pm-upstream

---

Directory layout

After several iterations your topic directory will look like:

for-topic/
├── .series.json
├── v1/
│   ├── 0000-cover-letter.patch
│   ├── 0001-subsys-Add-foo-support.patch
│   ├── 0002-subsys-Add-bar-support.patch
│   └── 0003-subsys-Add-baz-support.patch
├── v2/
│   ├── 0000-cover-letter.patch
│   ├── ...
├── v3/
│   ├── ...
└── v4/
    └── ...

---

Example session

A complete walk-through from v1 to v3 of a 3-patch series.

1. Initialise the series (v1)

$ cd /path/to/linux

$ gfs init -c abc1234 -n 3 --prefix "PATCH" -t for-topic --to [e-mail] --cc [e-mail]

  ✓ config saved → for-topic/.series.json

  ── Pass 1: generate patches ──

  ✓ for-topic/v1/0000-cover-letter.patch
  ✓ for-topic/v1/0001-subsys-Add-foo-support.patch
  ✓ for-topic/v1/0002-subsys-Add-bar-support.patch
  ✓ for-topic/v1/0003-subsys-Add-baz-support.patch

  ── Pass 2: adding get_maintainer.pl cc ──

  ✓ for-topic/v1/0000-cover-letter.patch
  ✓ for-topic/v1/0001-subsys-Add-foo-support.patch
  ✓ for-topic/v1/0002-subsys-Add-bar-support.patch
  ✓ for-topic/v1/0003-subsys-Add-baz-support.patch

2. Check with checkpatch and send v1

$ gfs check -t for-topic

  ── checkpatch.pl on for-topic/v1 ──

  ▸ ./scripts/checkpatch.pl --strict --codespell for-topic/v1/*.patch

$ git send-email for-topic/v1/*.patch

3. After review — generate v2

Amend commits based on review feedback, then:

$ gfs -v 2 -c abc1234 -n 3 --prefix "PATCH v2" -t for-topic

  ── Pass 1: generate patches ──
  ...
  ── Pass 2: adding get_maintainer.pl cc ──
  ...

  📝 Adding changelog trail (v1->v2):

  ✓ trail injected → 0000-cover-letter.patch
  ✓ trail injected → 0001-subsys-Add-foo-support.patch
  ✓ trail injected → 0002-subsys-Add-bar-support.patch
  ✓ trail injected → 0003-subsys-Add-baz-support.patch

Each patch and the cover letter now contain:

v1->v2:
 - 

4. Fill in the changelog notes

Edit each patch and write what changed:

$ vim for-topic/v2/0001-*.patch

Replace the empty - with actual notes:

v1->v2:
 - Refactored initialization logic.

5. Check and send v2

$ gfs check -t for-topic
$ git send-email for-topic/v2/*.patch

6. After another review — generate v3

$ gfs -v 3 -c abc1234 -n 3 --prefix "PATCH v3" -t for-topic

The changelog trail now accumulates automatically. Each patch contains:

Signed-off-by: You <[e-mail]>
---
v2->v3:
 - 

v1->v2:
 - Refactored initialization logic.

 drivers/subsys/foo.c | 118 +++...

And the cover letter contains the same trail before the shortlog:

v2->v3:
 - 

v1->v2:
 - Refactored initialization logic.

User Name (3):
  subsys: Add foo support
  ...

Fill in v2->v3:, run checkpatch, send — and repeat for v4, v5, …

---

Sending the series

Once your patches are ready, send them with git send-email:

git send-email --cc [e-mail] ./for-topic/v1/*.patch