govee-ble-local

Local Bluetooth LE control of Govee devices — no cloud, no LAN API.

A standalone Python library implementing Govee's BLE control protocol (AES-ECB+RC4 handshake, 20-byte command framing, multi-packet scene upload, and status read-back), derived from the decompiled Govee Home app and verified against real hardware. It's the protocol engine behind the hass-govee-ble-local Home Assistant integration, but has no Home Assistant dependency and can be used on its own.

⚠️ Unofficial. Not affiliated with or endorsed by Govee. Reverse-engineered from the app + hardware; behavior may change with device firmware. Live-verified on the H60A6 (Ceiling Light Pro); the other curated SKUs are modelled from the app and are not all hardware-verified (see the profile notes).

Install

pip install govee-ble-local
# optional Govee cloud-account helpers (pulls in aiohttp):
pip install 'govee-ble-local[cloud]'
# or, from a clone (editable, for development; needs the JVM kaitai-struct-compiler 0.11:
#   brew install kaitai-struct-compiler, or bash scripts/install_ksc.sh on Debian/Ubuntu;
#   see CONTRIBUTING.md):
git clone https://github.com/Brady-Woods/govee-ble-local.git
cd govee-ble-local && pip install -e '.[dev]'

Requires Python 3.11+. Installing from PyPI needs no compiler: the wheel ships the generated Kaitai classes. Runtime dependencies are deliberately minimal and Home-Assistant-friendly: bleak, bleak-retry-connector, cryptography (all shipped with HA), plus kaitaistruct (a pure-Python, stdlib-only wire-parser runtime). Dev extras: .[dev] (everything a contributor needs), or individually .[test], .[typing], .[lint], .[audit], .[docs].

Quick start

import asyncio
from govee_ble_local import create_device, discover

async def main():
    # Active-scan for supported Govee devices (strongest advertisement per address).
    devices = await discover(timeout=8.0)
    found = next(d for d in devices if d.sku == "H60A6")

    dev = create_device(found.ble_device, found.sku, found.advertisement)

    await dev.turn_on()
    await dev.set_brightness(60)             # percent
    await dev.set_rgb((255, 0, 0))
    await dev.set_zone_power("background", False)

    state = await dev.update()               # read-back into dev.state
    print(state.is_on, state.brightness, state.rgb_color, state.segments)

    await dev.stop()

asyncio.run(main())

API

The library follows Home-Assistant BLE-library conventions: identify a device from its advertisement, build a capability-driven Device, then drive it.

• discover(timeout=10.0, *, supported_only=True) — active-scan → list[DiscoveredDevice] (.ble_device, .advertisement, .sku, .rssi, .supported); raises GoveeBleConnectionError when the scan itself fails (no adapter, adapter off, no BlueZ/D-Bus); that error is also the BleakError / OSError / EOFError 1.3.0 raised, so either handler matches. supported(name, mfg) and match(ble_device, adv) are the passive-matcher hooks for a HA-style scanner.
• create_device(ble_device, sku, advertisement_data=None, *, secret=None, frame_log=None, idle_disconnect=None) — construct a Device for the SKU (raises GoveeBleNotSupported if uncurated). Pass the advertisement (DiscoveredDevice.advertisement or bleak's own): its encrypt flag selects the command channel, which some firmwares set differently from the SKU's default (H6008). is_supported_sku(sku) / supported_skus() / profile_for(sku) query the table (device_profile_for(sku) is a deprecated alias of profile_for, removed in 2.0).
• Device — one capability-gated class (behaviour comes from its DeviceProfile, not subclasses). Commands are ACK-confirmed on the wire: turn_on / turn_off / set_power, set_brightness, set_rgb, set_color_temp, set_segment_rgb / set_segment_brightness / set_segment_color_temp, set_zone_power / set_zone_rgb / set_zone_color_temp, set_scene / set_scene_by_name, and update() (read-back). Introspection: capabilities, zones, min_kelvin / max_kelvin, scene_names, state, register_callback. Methods for unsupported capabilities raise GoveeBleNotSupported.
• DeviceState — parsed state: is_on, brightness (0–100), rgb_color, color_temp_kelvin, segments (list[Segment]), zone_power, zone_color_temp_kelvin (H6047 reads one Kelvin per bar), gradual, scene_code, plus device-info (device_id / serial_number, wifi_mac, hardware_version, firmware_version, ble_mac), read with the Govee app's own frames (aa 06, aa 07 03, aa 07 02).
• Capability — POWER, BRIGHTNESS, RGB, COLOR_TEMP, SEGMENTS, SCENES.

Curated SKUs: H60A6, H6047, H61A8, H6004 (the BLE revision; the Wi-Fi-only one can't be controlled over BLE), H6006/H6008, H6052, H6641, H6188, H6062, H6061 (Glide Hexa: whole-device power, brightness, colour and colour temperature), and the plug family (H5080/H5082/H5083/H5085/H5089/H5160/H5161). Segment-colour read-back and some scene dialects on the non-H60A6 SKUs are source-modelled and not yet hardware-verified.

Colour temperature matches the Govee app's frames: like the app, an out-of-range Kelvin is clamped to the device range, not rejected (set_color_temp(1500) on a 2700-6500 K device sends 2700 K), and the result is rounded to a whole 100 K step (set_color_temp(2750) sends and reports 2800 K). state holds the Kelvin actually sent. Only a non-integer raises GoveeBleInvalidValue. Every CCT frame carries the app's Kelvin tint, and whole-device CCT is one frame (on the H60A6 the all-segments mask, as the app's Kelvin sliders send it).

Like the app, a picked RGB colour that is exactly one of its Kelvin tint colours (178 of them, two per 100 K step) and whose Kelvin is inside the SKU's range is sent as a colour-temperature frame instead of an RGB frame, and state then reports color_temp_kelvin with rgb_color unset: set_rgb, turn_on(rgb=), set_zone_rgb and set_segment_rgb on the 0x15 devices (H60A6, H61A8, H6641, H6062, H6047, with the same mask the RGB frame would use), the 0x0d bulbs and strip (H6004, H6006, H6008, H6052, H6188) and H6061. Colours outside the range or one channel off the table stay RGB. Not modelled: colour-set / mixed-colour picks and the real-time drag frames (RGB only). The H61A8's Kelvin range is [2000, 9000], or [2700, 6500] from hardware 3.08.01; until its hardware version is read (once per device, on the first poll) the range valid on both, [2700, 6500], applies (Device.min_kelvin / max_kelvin give the range in force). Its mode report carries no Kelvin, so after a colour-temperature write state keeps the Kelvin that was sent until an RGB or scene write or a scene report. Because it reports the same 15 01 00 00 after an RGB write too, a Kelvin the library sent stays in state across a colour change made in the Govee app.

Read-back decodes the aa 05 mode report the way the app's control screen does for each SKU. The H6052's screen reads its colour report as RGB only, so after a poll an H6052 in colour-temperature mode reports the report's colour as rgb_color (for a CCT the app or this library set, the Kelvin's tint) and no color_temp_kelvin.

The H6047 follows the app's frames too: whole-device power is 33 01 (33 36 is only the per-bar buttons, set_zone_power), read-back covers its 10 segments, Device.zone_color_temp_kelvin(name) gives each bar's Kelvin, and set_gradual toggles the fade flag.

The full API reference is generated from the docstrings with pdoc (pip install '.[docs]' && bash tools/gen_docs.sh → docs/api/); govee_ble_local.__all__ is the public contract.

Security notes

The Govee BLE protocol itself has well-known limits that this library cannot fix:

• Its encryption uses a public pre-shared key, AES-ECB for the handshake and an RC4 stream for traffic, and integrity is only an XOR checksum. Anyone within radio range can drive an encrypted device.
• Captures made with GOVEE_FRAME_LOG contain wire frames from which the session key can be derived. Treat them as sensitive and do not post them publicly. Frame-log files are created with owner-only permissions.

Diagnostics & session capture

The library logs under the govee_ble_local.* hierarchy and can capture a full protocol session (over a local adapter or a Home Assistant Bluetooth proxy) for analysis. Enable the flow trace, or the per-frame firehose, and decode a capture with the bundled govee-ble-analyze CLI. See docs/DIAGNOSTICS.md.

Protocol

The wire protocol is specified as Kaitai Struct definitions in spec/: one root per message class — govee_ble_frame.ksy (every command/reply frame, typed by its direction and the device's govee_profile), the decoded state (govee_state.ksy, govee_status_stream.ksy), the upload values (govee_upload.ksy), the advertisement (govee_manufacturer_data.ksy, govee_scan_record.ksy) and the BGC-info value (govee_bgc_info.ksy), sharing govee_common.ksy — with the per-device table in spec/devices.yaml. The Kaitai read-write classes under govee_ble_local/_generated/ are generated from those, and the library parses and builds every frame with them (source of truth: the decompiled Govee app).

Contributing & versioning

See CONTRIBUTING.md for development setup, branching, commit, and release conventions. Changes are tracked in CHANGELOG.md; the project follows Semantic Versioning. Live hardware tests run against the curated SKUs above.

License

MIT © Brady Woods