growatt-client 1.0.6

Python wrapper for getting data asynchronously

GrowattClient

Python wrapper for getting data asynchronously from Growatt inverters via serial RS232/RS485 connection and modbus RTU protocol.

The implementation is based on Growatt Inverter Modbus RTU Protocol V1.20.

Tested with inverters:

• SPH 10000 TL3 BH

Attributes

Depending on the firmware version of your inverter, not all attributes might be available

Holding register attributes

• serial_number
• model_number
• firmware

Input register attributes

Attribute	Register	Unit	Description	Misc
battery_charge	1011	kW	Battery charging
battery_charge_lifetime	1058	kWh	Battery charged total
battery_charge_today	1056	kWh	Battery charged today
battery_discharge	1009	kW	Battery discharging
battery_discharge_lifetime	1054	kWh	Battery discharged total
battery_discharge_today	1052	kWh	Battery discharged today
battery_voltage	1013	V	Battery voltage
consumption	Calc	kW	Consumption	{photovoltaics} + {battery_discharge} + {import_from_grid} - {export_to_grid} - {battery_charge}
consumption_lifetime	Calc	kWh	Consumption total	{photovoltaics_lifetime} + {battery_discharge_lifetime} + {import_from_grid_lifetime} - {export_to_grid_lifetime} - {battery_charge_lifetime}
consumption_today	Calc	kWh	Consumption today	{photovoltaics_today} + {battery_discharge_today} + {import_from_grid_today} - {export_to_grid_today} - {battery_charge_today}
export_to_grid	1029	kW	Export to grid
export_to_grid_lifetime	1050	kWh	Export to grid total
export_to_grid_today	1048	kWh	Export to grid today
grid_frequency	37	Hz	Grid frequency
grid_voltage	38	V	Grid voltage
import_from_grid	1021	kW	Import from grid
import_from_grid_lifetime	1046	kWh	Import from grid total
import_from_grid_today	1044	kWh	Import from grid today
inverter_temperature_1	93	°C	Inverter temperature
inverter_temperature_2	94	°C	The inside IPM in inverter Temperature
inverter_temperature_3	1040	°C	Battery temperature
local_load	1037	kW	Inverter local load
local_load_lifetime	1062	kWh	Inverter local load total
local_load_today	1060	kWh	Inverter local load today
photovoltaics	1	kW	Photovoltaics (PV) generation
photovoltaics_1	5	kW	Photovoltaics (PV) 1
photovoltaics_1_lifetime	61	kWh	Photovoltaics (PV) 1 total
photovoltaics_1_today	59	kWh	Photovoltaics (PV) 1 today
photovoltaics_1_voltage	3	V	Photovoltaics (PV) 1 voltage
photovoltaics_2	9	kW	Photovoltaics (PV) 2
photovoltaics_2_lifetime	65	kWh	Photovoltaics (PV) 2 total
photovoltaics_2_today	63	kWh	Photovoltaics (PV) 2 today
photovoltaics_2_voltage	7	V	Photovoltaics (PV) 2 voltage
photovoltaics_lifetime	91	kWh	Photovoltaics (PV) generation total
photovoltaics_today	Calc	kWh	Photovoltaics (PV) generation today	{photovoltaics_2_today} + {photovoltaics_1_today}
self_consumption	Calc	kW	Self Consumption	{consumption} if {export_to_grid} > 0 else {system_production}
statement_of_charge	1014	%	Statement of charge (SOC), capacity
system_production	Calc	kW	System Production	{photovoltaics} + {battery_discharge} - {battery_charge}
system_production_lifetime	Calc	kWh	System Production total	{photovoltaics_lifetime} + {battery_discharge_lifetime} - {battery_charge_lifetime}
system_production_today	Calc	kWh	System Production today	{photovoltaics_today} + {battery_discharge_today} - {battery_charge_today}
system_production_with_battery_lifetime	1139	kWh	System production total (including battery)
system_production_with_battery_today	1137	kWh	System production today (including battery)

How to use the package

import asyncio
import logging
from sys import argv

from growatt_client.growatt import GrowattClient

# defaults
# USB port of RS232/RS485 converter
DEFAULT_PORT = "/dev/ttyUSB0"
# Growatt modbus address
DEFAULT_ADDRESS = 0x1

logging.basicConfig(level=logging.DEBUG)


async def main():
    port = str(argv[1]) if len(argv) > 1 else DEFAULT_PORT
    address = int(argv[2]) if len(argv) > 2 else DEFAULT_ADDRESS
    growatt_client = GrowattClient(
        port, 
        address,
        attributes=["import_from_grid_today", "local_load_lifetime"],
        )
        
    try:
        data = await growatt_client.async_update()
        print(f"Sensors data: {data}")
    except Exception as error:
        print("Error: " + repr(error))


loop = asyncio.get_event_loop()
loop.run_until_complete(main())
loop.close()