gsusb-canfd (Python)

Part of the gsusb-canfd project. Python implementation of the library: a userspace gs_usb CAN FD driver built directly on pyusb/libusb. It speaks the same wire protocol as the C++ library in this repository, so the two are interchangeable.

It does not depend on the gs_usb / python-can packages. Those assume the candleLight reference endpoints (OUT = 0x02) and only configure classic CAN timing, so they cannot talk to adapters that use different bulk endpoints or CAN FD data-phase timing through GS_USB_BREQ_BT_CONST_EXT / DATA_BITTIMING. This package handles both.

Install

pip install gsusb-canfd        # from PyPI
# or, to work on the package itself:
pip install ./python

The distribution is named gsusb-canfd; the import name is gsusb_canfd.

Requires libusb-1.0 at runtime (brew install libusb, apt install libusb-1.0-0-dev).

Use

from gsusb_canfd import BusConfig, CanFdBus, CanFrame

bus = CanFdBus()
with bus:
    bus.configure(BusConfig(bitrate=1_000_000, sample_point=0.80,
                            data_bitrate=5_000_000, data_sample_point=0.75,
                            fd=True))
    bus.send(CanFrame(id=0x501, data=bytes([0x00, 0x02, 0x50, 0x01]),
                      fd=True, brs=True))
    while True:
        frame = bus.receive(timeout=0.5)
        if frame and not frame.echo and frame.id == 0x481:
            print(frame)

Extended frames: set id > 0x7FF or CanFrame(extended=True).

Async receive (callback on a background thread):

bus.start(lambda frame: print(frame))
...
bus.stop()

Devices

from gsusb_canfd import scan_adapters

for i, adapter in enumerate(scan_adapters()):
    print(i, adapter.name(), f"{adapter.vendor_id:04X}:{adapter.product_id:04X}",
          adapter.serial)

Select one with a DeviceSelector (vid, pid, index, channel, serial, product). By default any gs_usb adapter is auto-discovered (known USB ids plus descriptor heuristics); pass explicit vid/pid to pin one. On devices with several CAN channels, channel selects which one (bus.channel_count() reports the count).

CLI

gsusb-canfd list

gsusb-canfd monitor --bitrate 1000000 --sample-point 0.80 \
                    --data-bitrate 5000000 --data-sample-point 0.75 \
                    --trigger --trigger-id 501 --trigger-data 00025001 \
                    --count 20

gsusb-canfd send --classic 123 1122334455667788

Hardware demo

examples/canfd_demo.py mirrors the C++ demo: it prints the adapter capabilities and negotiated timing, sends a trigger on 0x501, and reports responses on 0x481 with a periodic frame rate.

python examples/canfd_demo.py --seconds 6
python examples/canfd_demo.py --monitor --seconds 5
python examples/canfd_demo.py --all --all-frames

Tests

The protocol logic (bit timing, DLC mapping, frame codec) is pure Python and is covered by unit tests that need no hardware:

pip install -e './python[dev]'
pytest python/tests

Releasing

See PUBLISHING.md; the version lives in src/gsusb_canfd/_version.py.