haicu-eth 0.9.6

package for HAICU experiment

HAICU Control Script (haicu-ctl)

Overview

Package and command line utility for controlling and sequencing the MLD1200

Installation

The recommended installation method is via pip

To install/upgrade: pip install -U haicu

To run it locally from the source (from the scripts/haicu directory): python -m haicu

Usage

Command: haicu-ctl [-h] [--version] [-v] [-l file] [-s SERIAL] [-j] {list,info,set,upload,program,convert,compare}

Purpose: Connects to an MLD1200 device and reads/writes registers, statuses, and memory. Also contains utility functions to create .RLE files for consumption by device.

Options:

-h or --help Print out help for general usage or subcommand. Ie: haicu-ctl -h or haicu-ctl set -h

--version Print out current version

-v or --verbose Increase logging level, can be used multiple times

-l LOG_FILE or --log LOG_FILE Specify log file name, instead of standard naming scheme

-s SERIAL or --serial SERIAL Specify serial number of MLD1200 to connect to

-j or --json For reads, format output in JSON. Only affects set (with no value), info, status, control, memory, and bread

The available subcommands are:

• list - List of available MLD1200 devices
• info - Get full report on MLD1200, all registers and status bits
• set <regname> [data] - Allows human-readable setting of register values. If data is omitted, returns current value in register
• upload <file> <section> - Upload a new sequence into MLD1200 from file. Choose section to load ('left','right','extension'). Does not start sequence.
• program [config_file] [--auto/-a] - Upload and start sequence. Can be passed a path to an INI file, otherwise tries to use 'haicu.ini' in current directory. The '--auto' option auto-reload the sequencer when it finishes, it will then start again on next trigger.
• convert <infile> <outfile> - Convert a derived format file 'infile' into RLE formatted file 'outfile'
• compare <derived_file> <rle_file> - Compare a derived file to an RLE file

Diagnostic subcommands:

• memtest - Test the selected MLD by writing and reading random values to DDR memory
• status <addr> - Low level readback of status register at given address
• control <addr> [data] - Low level read/write of control registers. Omit 'data' to return current value at given address
• memory <addr> [data] - Low level read/write of DDR memory. Omit 'data' to return current value at given address
• bread <addr> <count> - Low level block read of DDR memory section. Reads 'count' words out of DDR started at given address